From: narmstrong@baylibre.com (Neil Armstrong)
To: linus-amlogic@lists.infradead.org
Subject: [RFC PATCH v2 1/9] mailbox: Add Amlogic Meson Message-Handling-Unit
Date: Tue, 21 Jun 2016 12:02:46 +0200 [thread overview]
Message-ID: <1466503374-28841-2-git-send-email-narmstrong@baylibre.com> (raw)
In-Reply-To: <1466503374-28841-1-git-send-email-narmstrong@baylibre.com>
Add Amlogic Meson SoCs Message-Handling-Unit as mailbox controller
with 2 independent channels/links to communicate with a remote processor.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/mailbox/Makefile | 2 +
drivers/mailbox/meson_mhu.c | 199 ++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 201 insertions(+)
create mode 100644 drivers/mailbox/meson_mhu.c
diff --git a/drivers/mailbox/Makefile b/drivers/mailbox/Makefile
index 0be3e74..6aa9dbe 100644
--- a/drivers/mailbox/Makefile
+++ b/drivers/mailbox/Makefile
@@ -25,3 +25,5 @@ obj-$(CONFIG_TI_MESSAGE_MANAGER) += ti-msgmgr.o
obj-$(CONFIG_XGENE_SLIMPRO_MBOX) += mailbox-xgene-slimpro.o
obj-$(CONFIG_HI6220_MBOX) += hi6220-mailbox.o
+
+obj-$(CONFIG_ARCH_MESON) += meson_mhu.o
diff --git a/drivers/mailbox/meson_mhu.c b/drivers/mailbox/meson_mhu.c
new file mode 100644
index 0000000..0576b92
--- /dev/null
+++ b/drivers/mailbox/meson_mhu.c
@@ -0,0 +1,199 @@
+/*
+ * Copyright (C) 2016 BayLibre SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Heavily based on meson_mhu.c from :
+ * Copyright (C) 2013-2015 Fujitsu Semiconductor Ltd.
+ * Copyright (C) 2015 Linaro Ltd.
+ * Author: Jassi Brar <jaswinder.singh@linaro.org>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mailbox_controller.h>
+
+#define INTR_SET_OFS 0x0
+#define INTR_STAT_OFS 0x4
+#define INTR_CLR_OFS 0x8
+
+#define MHU_LP_OFFSET 0x10
+#define MHU_HP_OFFSET 0x1c
+
+#define TX_REG_OFFSET 0x24
+
+#define MHU_CHANS 2
+
+struct meson_mhu_link {
+ unsigned int irq;
+ void __iomem *tx_reg;
+ void __iomem *rx_reg;
+};
+
+struct meson_mhu {
+ void __iomem *base;
+ struct meson_mhu_link mlink[MHU_CHANS];
+ struct mbox_chan chan[MHU_CHANS];
+ struct mbox_controller mbox;
+};
+
+static irqreturn_t meson_mhu_rx_interrupt(int irq, void *p)
+{
+ struct mbox_chan *chan = p;
+ struct meson_mhu_link *mlink = chan->con_priv;
+ u32 val;
+
+ val = readl_relaxed(mlink->rx_reg + INTR_STAT_OFS);
+ if (!val)
+ return IRQ_NONE;
+
+ mbox_chan_received_data(chan, (void *)&val);
+
+ writel_relaxed(~0, mlink->rx_reg + INTR_CLR_OFS);
+
+ return IRQ_HANDLED;
+}
+
+static bool meson_mhu_last_tx_done(struct mbox_chan *chan)
+{
+ struct meson_mhu_link *mlink = chan->con_priv;
+ u32 val = readl_relaxed(mlink->tx_reg + INTR_STAT_OFS);
+
+ return (val == 0);
+}
+
+static int meson_mhu_send_data(struct mbox_chan *chan, void *data)
+{
+ struct meson_mhu_link *mlink = chan->con_priv;
+ u32 *arg = data;
+
+ writel_relaxed(*arg, mlink->tx_reg + INTR_SET_OFS);
+
+ return 0;
+}
+
+static int meson_mhu_startup(struct mbox_chan *chan)
+{
+ struct meson_mhu_link *mlink = chan->con_priv;
+ int ret;
+
+ ret = request_irq(mlink->irq, meson_mhu_rx_interrupt,
+ IRQF_ONESHOT, "meson_mhu_link", chan);
+ if (ret) {
+ dev_err(chan->mbox->dev,
+ "Unable to acquire IRQ %d\n", mlink->irq);
+ return ret;
+ }
+
+ return 0;
+}
+
+static void meson_mhu_shutdown(struct mbox_chan *chan)
+{
+ struct meson_mhu_link *mlink = chan->con_priv;
+
+ free_irq(mlink->irq, chan);
+}
+
+static const struct mbox_chan_ops meson_mhu_ops = {
+ .send_data = meson_mhu_send_data,
+ .startup = meson_mhu_startup,
+ .shutdown = meson_mhu_shutdown,
+ .last_tx_done = meson_mhu_last_tx_done,
+};
+
+static int meson_mhu_probe(struct platform_device *pdev)
+{
+ int i, err;
+ struct meson_mhu *mhu;
+ struct device *dev = &pdev->dev;
+ struct resource *res;
+ int meson_mhu_reg[MHU_CHANS] = {MHU_LP_OFFSET, MHU_HP_OFFSET};
+
+ /* Allocate memory for device */
+ mhu = devm_kzalloc(dev, sizeof(*mhu), GFP_KERNEL);
+ if (!mhu)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ mhu->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(mhu->base)) {
+ dev_err(dev, "ioremap failed\n");
+ return PTR_ERR(mhu->base);
+ }
+
+ for (i = 0; i < MHU_CHANS; i++) {
+ mhu->chan[i].con_priv = &mhu->mlink[i];
+ mhu->mlink[i].irq = platform_get_irq(pdev, i);
+ if (mhu->mlink[i].irq < 0) {
+ dev_err(dev, "failed to get irq%d\n", i);
+ return mhu->mlink[i].irq;
+ }
+ mhu->mlink[i].rx_reg = mhu->base + meson_mhu_reg[i];
+ mhu->mlink[i].tx_reg = mhu->mlink[i].rx_reg + TX_REG_OFFSET;
+ }
+
+ mhu->mbox.dev = dev;
+ mhu->mbox.chans = &mhu->chan[0];
+ mhu->mbox.num_chans = MHU_CHANS;
+ mhu->mbox.ops = &meson_mhu_ops;
+ mhu->mbox.txdone_irq = false;
+ mhu->mbox.txdone_poll = true;
+ mhu->mbox.txpoll_period = 1;
+
+ platform_set_drvdata(pdev, mhu);
+
+ err = mbox_controller_register(&mhu->mbox);
+ if (err) {
+ dev_err(dev, "Failed to register mailboxes %d\n", err);
+ return err;
+ }
+
+ dev_info(dev, "Meson MHU Mailbox registered\n");
+ return 0;
+}
+
+static int meson_mhu_remove(struct platform_device *pdev)
+{
+ struct meson_mhu *mhu = platform_get_drvdata(pdev);
+
+ mbox_controller_unregister(&mhu->mbox);
+
+ return 0;
+}
+
+static const struct of_device_id meson_mhu_dt_ids[] = {
+ { .compatible = "amlogic,meson-gxbb-mhu", },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, meson_mhu_ids);
+
+static struct platform_driver meson_wdt_driver = {
+ .probe = meson_mhu_probe,
+ .remove = meson_mhu_remove,
+ .driver = {
+ .name = "meson-mhu",
+ .of_match_table = meson_mhu_dt_ids,
+ },
+};
+
+module_platform_driver(meson_wdt_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:meson-mhu");
+MODULE_DESCRIPTION("Amlogic Meson MHU Driver");
+MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
--
2.7.0
next prev parent reply other threads:[~2016-06-21 10:02 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-21 10:02 [RFC PATCH v2 0/9] scpi: Add SCPI registry to handle legacy protocol Neil Armstrong
2016-06-21 10:02 ` Neil Armstrong [this message]
2016-06-22 4:31 ` [RFC PATCH v2 1/9] mailbox: Add Amlogic Meson Message-Handling-Unit Jassi Brar
2016-06-23 12:50 ` Neil Armstrong
2016-06-23 15:46 ` Neil Armstrong
2016-06-25 17:50 ` Jassi Brar
2016-06-28 14:00 ` Neil Armstrong
2016-06-28 15:06 ` Jassi Brar
2016-07-04 15:25 ` Jassi Brar
2016-07-04 15:38 ` Jassi Brar
2016-07-06 13:17 ` Neil Armstrong
2016-07-07 4:27 ` Jassi Brar
2016-06-21 10:02 ` [RFC PATCH v2 2/9] dt-bindings: mailbox: Add Amlogic Meson MHU Bindings Neil Armstrong
2016-06-21 10:02 ` [RFC PATCH v2 3/9] ARM64: dts: meson-gxbb: Add Meson MHU Node Neil Armstrong
2016-06-21 10:02 ` [RFC PATCH v2 4/9] firmware: Add a SCPI registry to handle multiple implementations Neil Armstrong
2016-06-21 10:02 ` [RFC PATCH v2 5/9] firmware: scpi: Switch arm_scpi to use new registry Neil Armstrong
2016-06-21 10:02 ` [RFC PATCH v2 6/9] firmware: Add legacy SCPI protocol driver Neil Armstrong
2016-06-30 10:53 ` Sudeep Holla
2016-07-19 9:17 ` Neil Armstrong
2016-06-21 10:02 ` [RFC PATCH v2 7/9] dt-bindings: arm: Update arm, scpi bindings with Meson GXBB SCPI Neil Armstrong
2016-06-21 10:02 ` [RFC PATCH v2 8/9] ARM64: dts: meson-gxbb: Add SRAM node Neil Armstrong
2016-06-21 10:02 ` [RFC PATCH v2 9/9] ARM64: dts: meson-gxbb: Add SCPI with cpufreq & sensors Nodes Neil Armstrong
2016-06-22 2:54 ` [RFC PATCH v2 0/9] scpi: Add SCPI registry to handle legacy protocol Frank Wang
2016-06-23 12:45 ` Neil Armstrong
2016-06-24 2:31 ` Frank Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1466503374-28841-2-git-send-email-narmstrong@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=linus-amlogic@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®