* [PATCH v3 1/4] dt-bindings: clock: amlogic, gxbb-aoclkc: Update bindings
2017-07-31 12:42 [PATCH v3 0/4] clk: meson: gxbb-aoclk: Add CEC 32k clock Neil Armstrong
@ 2017-07-31 12:42 ` Neil Armstrong
2017-07-31 12:42 ` [PATCH v3 2/4] clk: meson: gxbb-aoclk: Switch to regmap for register access Neil Armstrong
` (2 subsequent siblings)
3 siblings, 0 replies; 7+ messages in thread
From: Neil Armstrong @ 2017-07-31 12:42 UTC (permalink / raw)
To: linus-amlogic
On the first revision of the bindings, only the gates + resets were known
in the AO Clock HW, but more registers used to configures AO clock are known
to be spread among the AO register space.
This patch adds a parent node for the entire system control zone for the AO
domain then moves the clock controller as a subnode of the system control
node.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
.../bindings/clock/amlogic,gxbb-aoclkc.txt | 22 ++++++++++++++++------
1 file changed, 16 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt
index a55d31b..64884ed 100644
--- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt
+++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt
@@ -5,9 +5,11 @@ controllers within the Always-On part of the SoC.
Required Properties:
-- compatible: should be "amlogic,gxbb-aoclkc"
-- reg: physical base address of the clock controller and length of memory
- mapped region.
+- compatible: value should be different for each SoC family as :
+ - GXBB (S905) : "amlogic,meson-gxbb-aoclkc"
+ - GXL (S905X, S905D) : "amlogic,meson-gxl-aoclkc"
+ - GXM (S912) : "amlogic,meson-gxm-aoclkc"
+ followed by the common "amlogic,meson-gx-aoclkc"
- #clock-cells: should be 1.
@@ -23,14 +25,22 @@ to specify the reset which they consume. All available resets are defined as
preprocessor macros in the dt-bindings/reset/gxbb-aoclkc.h header and can be
used in device tree sources.
+Parent node should have the following properties :
+- compatible: "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd"
+- reg: base address and size of the AO system control register space.
+
Example: AO Clock controller node:
- clkc_AO: clock-controller at 040 {
- compatible = "amlogic,gxbb-aoclkc";
- reg = <0x0 0x040 0x0 0x4>;
+ao_sysctrl: sys-ctrl at 0 {
+ compatible = "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd";
+ reg = <0x0 0x0 0x0 0x100>;
+
+ clkc_AO: clock-controller {
+ compatible = "amlogic,meson-gxbb-aoclkc", "amlogic,meson-gx-aoclkc";
#clock-cells = <1>;
#reset-cells = <1>;
};
+};
Example: UART controller node that consumes the clock and reset generated
by the clock controller:
--
1.9.1
^ permalink raw reply [flat|nested] 7+ messages in thread* [PATCH v3 2/4] clk: meson: gxbb-aoclk: Switch to regmap for register access
2017-07-31 12:42 [PATCH v3 0/4] clk: meson: gxbb-aoclk: Add CEC 32k clock Neil Armstrong
2017-07-31 12:42 ` [PATCH v3 1/4] dt-bindings: clock: amlogic, gxbb-aoclkc: Update bindings Neil Armstrong
@ 2017-07-31 12:42 ` Neil Armstrong
2017-07-31 12:42 ` [PATCH v3 3/4] dt-bindings: clock: gxbb-aoclk: Add CEC 32k clock Neil Armstrong
2017-07-31 12:42 ` [PATCH v3 4/4] clk: meson: " Neil Armstrong
3 siblings, 0 replies; 7+ messages in thread
From: Neil Armstrong @ 2017-07-31 12:42 UTC (permalink / raw)
To: linus-amlogic
Switch the aoclk driver to use the new bindings and switch all the
registers access to regmap only.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/clk/meson/Makefile | 2 +-
drivers/clk/meson/gxbb-aoclk-regmap.c | 46 +++++++++++++++++++++++++++++++++++
drivers/clk/meson/gxbb-aoclk.c | 44 ++++++++++++++++-----------------
drivers/clk/meson/gxbb-aoclk.h | 26 ++++++++++++++++++++
4 files changed, 95 insertions(+), 23 deletions(-)
create mode 100644 drivers/clk/meson/gxbb-aoclk-regmap.c
create mode 100644 drivers/clk/meson/gxbb-aoclk.h
diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index 83b6d9d..de65427 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -4,4 +4,4 @@
obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-cpu.o clk-mpll.o clk-audio-divider.o
obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
-obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o
+obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o gxbb-aoclk-regmap.o
diff --git a/drivers/clk/meson/gxbb-aoclk-regmap.c b/drivers/clk/meson/gxbb-aoclk-regmap.c
new file mode 100644
index 0000000..2515fbf
--- /dev/null
+++ b/drivers/clk/meson/gxbb-aoclk-regmap.c
@@ -0,0 +1,46 @@
+/*
+ * Copyright (c) 2017 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/bitfield.h>
+#include <linux/regmap.h>
+#include "gxbb-aoclk.h"
+
+static int aoclk_gate_regmap_enable(struct clk_hw *hw)
+{
+ struct aoclk_gate_regmap *gate = to_aoclk_gate_regmap(hw);
+
+ return regmap_update_bits(gate->regmap, AO_RTI_GEN_CNTL_REG0,
+ BIT(gate->bit_idx), BIT(gate->bit_idx));
+}
+
+static void aoclk_gate_regmap_disable(struct clk_hw *hw)
+{
+ struct aoclk_gate_regmap *gate = to_aoclk_gate_regmap(hw);
+
+ regmap_update_bits(gate->regmap, AO_RTI_GEN_CNTL_REG0,
+ BIT(gate->bit_idx), 0);
+}
+
+static int aoclk_gate_regmap_is_enabled(struct clk_hw *hw)
+{
+ struct aoclk_gate_regmap *gate = to_aoclk_gate_regmap(hw);
+ unsigned int val;
+ int ret;
+
+ ret = regmap_read(gate->regmap, AO_RTI_GEN_CNTL_REG0, &val);
+ if (ret)
+ return ret;
+
+ return (val & BIT(gate->bit_idx)) != 0;
+}
+
+const struct clk_ops meson_aoclk_gate_regmap_ops = {
+ .enable = aoclk_gate_regmap_enable,
+ .disable = aoclk_gate_regmap_disable,
+ .is_enabled = aoclk_gate_regmap_is_enabled,
+};
diff --git a/drivers/clk/meson/gxbb-aoclk.c b/drivers/clk/meson/gxbb-aoclk.c
index b45c5fb..f61506c 100644
--- a/drivers/clk/meson/gxbb-aoclk.c
+++ b/drivers/clk/meson/gxbb-aoclk.c
@@ -56,16 +56,19 @@
#include <linux/of_address.h>
#include <linux/platform_device.h>
#include <linux/reset-controller.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
#include <linux/init.h>
#include <dt-bindings/clock/gxbb-aoclkc.h>
#include <dt-bindings/reset/gxbb-aoclkc.h>
+#include "gxbb-aoclk.h"
static DEFINE_SPINLOCK(gxbb_aoclk_lock);
struct gxbb_aoclk_reset_controller {
struct reset_controller_dev reset;
unsigned int *data;
- void __iomem *base;
+ struct regmap *regmap;
};
static int gxbb_aoclk_do_reset(struct reset_controller_dev *rcdev,
@@ -74,9 +77,8 @@ static int gxbb_aoclk_do_reset(struct reset_controller_dev *rcdev,
struct gxbb_aoclk_reset_controller *reset =
container_of(rcdev, struct gxbb_aoclk_reset_controller, reset);
- writel(BIT(reset->data[id]), reset->base);
-
- return 0;
+ return regmap_write(reset->regmap, AO_RTI_GEN_CNTL_REG0,
+ BIT(reset->data[id]));
}
static const struct reset_control_ops gxbb_aoclk_reset_ops = {
@@ -84,13 +86,12 @@ static int gxbb_aoclk_do_reset(struct reset_controller_dev *rcdev,
};
#define GXBB_AO_GATE(_name, _bit) \
-static struct clk_gate _name##_ao = { \
- .reg = (void __iomem *)0, \
+static struct aoclk_gate_regmap _name##_ao = { \
.bit_idx = (_bit), \
.lock = &gxbb_aoclk_lock, \
.hw.init = &(struct clk_init_data) { \
.name = #_name "_ao", \
- .ops = &clk_gate_ops, \
+ .ops = &meson_aoclk_gate_regmap_ops, \
.parent_names = (const char *[]){ "clk81" }, \
.num_parents = 1, \
.flags = (CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED), \
@@ -113,7 +114,7 @@ static int gxbb_aoclk_do_reset(struct reset_controller_dev *rcdev,
[RESET_AO_IR_BLASTER] = 23,
};
-static struct clk_gate *gxbb_aoclk_gate[] = {
+static struct aoclk_gate_regmap *gxbb_aoclk_gate[] = {
[CLKID_AO_REMOTE] = &remote_ao,
[CLKID_AO_I2C_MASTER] = &i2c_master_ao,
[CLKID_AO_I2C_SLAVE] = &i2c_slave_ao,
@@ -136,24 +137,23 @@ static int gxbb_aoclk_do_reset(struct reset_controller_dev *rcdev,
static int gxbb_aoclkc_probe(struct platform_device *pdev)
{
- struct resource *res;
- void __iomem *base;
- int ret, clkid;
- struct device *dev = &pdev->dev;
struct gxbb_aoclk_reset_controller *rstc;
+ struct device *dev = &pdev->dev;
+ struct regmap *regmap;
+ int ret, clkid;
rstc = devm_kzalloc(dev, sizeof(*rstc), GFP_KERNEL);
if (!rstc)
return -ENOMEM;
- /* Generic clocks */
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- base = devm_ioremap_resource(dev, res);
- if (IS_ERR(base))
- return PTR_ERR(base);
+ regmap = syscon_node_to_regmap(of_get_parent(dev->of_node));
+ if (IS_ERR(regmap)) {
+ dev_err(dev, "failed to get regmap\n");
+ return -ENODEV;
+ }
/* Reset Controller */
- rstc->base = base;
+ rstc->regmap = regmap;
rstc->data = gxbb_aoclk_reset;
rstc->reset.ops = &gxbb_aoclk_reset_ops;
rstc->reset.nr_resets = ARRAY_SIZE(gxbb_aoclk_reset);
@@ -161,10 +161,10 @@ static int gxbb_aoclkc_probe(struct platform_device *pdev)
ret = devm_reset_controller_register(dev, &rstc->reset);
/*
- * Populate base address and register all clks
+ * Populate regmap and register all clks
*/
- for (clkid = 0; clkid < gxbb_aoclk_onecell_data.num; clkid++) {
- gxbb_aoclk_gate[clkid]->reg = base;
+ for (clkid = 0; clkid < ARRAY_SIZE(gxbb_aoclk_gate); clkid++) {
+ gxbb_aoclk_gate[clkid]->regmap = regmap;
ret = devm_clk_hw_register(dev,
gxbb_aoclk_onecell_data.hws[clkid]);
@@ -177,7 +177,7 @@ static int gxbb_aoclkc_probe(struct platform_device *pdev)
}
static const struct of_device_id gxbb_aoclkc_match_table[] = {
- { .compatible = "amlogic,gxbb-aoclkc" },
+ { .compatible = "amlogic,meson-gx-aoclkc" },
{ }
};
diff --git a/drivers/clk/meson/gxbb-aoclk.h b/drivers/clk/meson/gxbb-aoclk.h
new file mode 100644
index 0000000..2e26108
--- /dev/null
+++ b/drivers/clk/meson/gxbb-aoclk.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright (c) 2017 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __GXBB_AOCLKC_H
+#define __GXBB_AOCLKC_H
+
+/* AO Configuration Clock registers offsets */
+#define AO_RTI_GEN_CNTL_REG0 0x40
+
+struct aoclk_gate_regmap {
+ struct clk_hw hw;
+ unsigned bit_idx;
+ struct regmap *regmap;
+ spinlock_t *lock;
+};
+
+#define to_aoclk_gate_regmap(_hw) \
+ container_of(_hw, struct aoclk_gate_regmap, hw)
+
+extern const struct clk_ops meson_aoclk_gate_regmap_ops;
+
+#endif /* __GXBB_AOCLKC_H */
--
1.9.1
^ permalink raw reply [flat|nested] 7+ messages in thread* [PATCH v3 4/4] clk: meson: gxbb-aoclk: Add CEC 32k clock
2017-07-31 12:42 [PATCH v3 0/4] clk: meson: gxbb-aoclk: Add CEC 32k clock Neil Armstrong
` (2 preceding siblings ...)
2017-07-31 12:42 ` [PATCH v3 3/4] dt-bindings: clock: gxbb-aoclk: Add CEC 32k clock Neil Armstrong
@ 2017-07-31 12:42 ` Neil Armstrong
2017-07-31 16:25 ` Chris Moore
3 siblings, 1 reply; 7+ messages in thread
From: Neil Armstrong @ 2017-07-31 12:42 UTC (permalink / raw)
To: linus-amlogic
The CEC 32K AO Clock is a dual divider with dual counter to provide a more
precise 32768Hz clock for the CEC subsystem from the external xtal.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/clk/meson/Makefile | 2 +-
drivers/clk/meson/gxbb-aoclk-32k.c | 194 +++++++++++++++++++++++++++++++++++++
drivers/clk/meson/gxbb-aoclk.c | 21 +++-
drivers/clk/meson/gxbb-aoclk.h | 16 +++
4 files changed, 231 insertions(+), 2 deletions(-)
create mode 100644 drivers/clk/meson/gxbb-aoclk-32k.c
diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index de65427..b139d41 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -4,4 +4,4 @@
obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-cpu.o clk-mpll.o clk-audio-divider.o
obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
-obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o gxbb-aoclk-regmap.o
+obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o gxbb-aoclk-regmap.o gxbb-aoclk-32k.o
diff --git a/drivers/clk/meson/gxbb-aoclk-32k.c b/drivers/clk/meson/gxbb-aoclk-32k.c
new file mode 100644
index 0000000..c11eabd
--- /dev/null
+++ b/drivers/clk/meson/gxbb-aoclk-32k.c
@@ -0,0 +1,194 @@
+/*
+ * Copyright (c) 2017 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/bitfield.h>
+#include <linux/regmap.h>
+#include "gxbb-aoclk.h"
+
+/*
+ * The AO Domain embeds a dual/divider to generate a more precise
+ * 32,768KHz clock for low-power suspend mode and CEC.
+ * ______ ______
+ * | | | |
+ * ______ | Div1 |-| Cnt1 | ______
+ * | | /|______| |______|\ | |
+ * Xtal-->| Gate |---| ______ ______ X-X--| Gate |-->
+ * |______| | \| | | |/ | |______|
+ * | | Div2 |-| Cnt2 | |
+ * | |______| |______| |
+ * |_______________________|
+ *
+ * The dividing can be switched to single or dual, with a counter
+ * for each divider to set when the switching is done.
+ * The entire dividing mechanism can be also bypassed.
+ */
+
+#define CLK_CNTL0_N1_MASK GENMASK(11, 0)
+#define CLK_CNTL0_N2_MASK GENMASK(23, 12)
+#define CLK_CNTL0_DUALDIV_EN BIT(28)
+#define CLK_CNTL0_OUT_GATE_EN BIT(30)
+#define CLK_CNTL0_IN_GATE_EN BIT(31)
+
+#define CLK_CNTL1_M1_MASK GENMASK(11, 0)
+#define CLK_CNTL1_M2_MASK GENMASK(23, 12)
+#define CLK_CNTL1_BYPASS_EN BIT(24)
+#define CLK_CNTL1_SELECT_OSC BIT(27)
+
+#define PWR_CNTL_ALT_32K_SEL GENMASK(13, 10)
+
+struct cec_32k_freq_table {
+ unsigned long parent_rate;
+ unsigned long target_rate;
+ bool dualdiv;
+ unsigned int n1;
+ unsigned int n2;
+ unsigned int m1;
+ unsigned int m2;
+};
+
+static const struct cec_32k_freq_table aoclk_cec_32k_table[] = {
+ [0] = {
+ .parent_rate = 24000000,
+ .target_rate = 32768,
+ .dualdiv = true,
+ .n1 = 733,
+ .n2 = 732,
+ .m1 = 8,
+ .m2 = 11,
+ },
+};
+
+/*
+ * If CLK_CNTL0_DUALDIV_EN == 0
+ * - will use N1 divider only
+ * If CLK_CNTL0_DUALDIV_EN == 1
+ * - hold M1 cycles of N1 divider then changes to N2
+ * - hold M2 cycles of N2 divider then changes to N1
+ * Then we can get more accurate division.
+ */
+static unsigned long aoclk_cec_32k_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct aoclk_cec_32k *cec_32k = to_aoclk_cec_32k(hw);
+ unsigned long n1;
+ u32 reg0, reg1;
+
+ regmap_read(cec_32k->regmap, AO_RTC_ALT_CLK_CNTL0, ®0);
+ regmap_read(cec_32k->regmap, AO_RTC_ALT_CLK_CNTL1, ®1);
+
+ if (reg1 & CLK_CNTL1_BYPASS_EN)
+ return parent_rate;
+
+ if (reg0 & CLK_CNTL0_DUALDIV_EN) {
+ unsigned long n2, m1, m2, f1, f2, p1, p2;
+
+ n1 = FIELD_GET(CLK_CNTL0_N1_MASK, reg0) + 1;
+ n2 = FIELD_GET(CLK_CNTL0_N2_MASK, reg0) + 1;
+
+ m1 = FIELD_GET(CLK_CNTL1_M1_MASK, reg1) + 1;
+ m2 = FIELD_GET(CLK_CNTL1_M2_MASK, reg1) + 1;
+
+ f1 = DIV_ROUND_CLOSEST(parent_rate, n1);
+ f2 = DIV_ROUND_CLOSEST(parent_rate, n2);
+
+ p1 = DIV_ROUND_CLOSEST(100000000 * m1, f1 * (m1 + m2));
+ p2 = DIV_ROUND_CLOSEST(100000000 * m2, f2 * (m1 + m2));
+
+ return DIV_ROUND_UP(100000000, p1 + p2);
+ }
+
+ n1 = FIELD_GET(CLK_CNTL0_N1_MASK, reg0) + 1;
+
+ return DIV_ROUND_CLOSEST(parent_rate, n1);
+}
+
+static const struct cec_32k_freq_table *find_cec_32k_freq(unsigned long rate,
+ unsigned long prate)
+{
+ int i;
+
+ for (i = 0 ; i < ARRAY_SIZE(aoclk_cec_32k_table) ; ++i)
+ if (aoclk_cec_32k_table[i].parent_rate == prate &&
+ aoclk_cec_32k_table[i].target_rate == rate)
+ return &aoclk_cec_32k_table[i];
+
+ return NULL;
+}
+
+static long aoclk_cec_32k_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ const struct cec_32k_freq_table *freq = find_cec_32k_freq(rate,
+ *prate);
+
+ /* If invalid return first one */
+ if (!freq)
+ return aoclk_cec_32k_table[0].target_rate;
+
+ return freq->target_rate;
+}
+
+/*
+ * From the Amlogic init procedure, the IN and OUT gates needs to be handled
+ * in the init procedure to avoid any glitches.
+ */
+
+static int aoclk_cec_32k_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ const struct cec_32k_freq_table *freq = find_cec_32k_freq(rate,
+ parent_rate);
+ struct aoclk_cec_32k *cec_32k = to_aoclk_cec_32k(hw);
+ u32 reg = 0;
+
+ if (!freq)
+ return -EINVAL;
+
+ /* Disable clock */
+ regmap_update_bits(cec_32k->regmap, AO_RTC_ALT_CLK_CNTL0,
+ CLK_CNTL0_IN_GATE_EN | CLK_CNTL0_OUT_GATE_EN, 0);
+
+ reg = FIELD_PREP(CLK_CNTL0_N1_MASK, freq->n1 - 1);
+ if (freq->dualdiv)
+ reg |= CLK_CNTL0_DUALDIV_EN |
+ FIELD_PREP(CLK_CNTL0_N2_MASK, freq->n2 - 1);
+
+ regmap_write(cec_32k->regmap, AO_RTC_ALT_CLK_CNTL0, reg);
+
+ reg = FIELD_PREP(CLK_CNTL1_M1_MASK, freq->m1 - 1);
+ if (freq->dualdiv)
+ reg = FIELD_PREP(CLK_CNTL1_M2_MASK, freq->m2 - 1);
+
+ regmap_write(cec_32k->regmap, AO_RTC_ALT_CLK_CNTL1, reg);
+
+ /* Enable clock */
+ regmap_update_bits(cec_32k->regmap, AO_RTC_ALT_CLK_CNTL0,
+ CLK_CNTL0_IN_GATE_EN, CLK_CNTL0_IN_GATE_EN);
+
+ udelay(200);
+
+ regmap_update_bits(cec_32k->regmap, AO_RTC_ALT_CLK_CNTL0,
+ CLK_CNTL0_OUT_GATE_EN, CLK_CNTL0_OUT_GATE_EN);
+
+ regmap_update_bits(cec_32k->regmap, AO_CRT_CLK_CNTL1,
+ CLK_CNTL1_SELECT_OSC, CLK_CNTL1_SELECT_OSC);
+
+ /* Select 32k from XTAL */
+ regmap_update_bits(cec_32k->regmap,
+ AO_RTI_PWR_CNTL_REG0,
+ PWR_CNTL_ALT_32K_SEL,
+ FIELD_PREP(PWR_CNTL_ALT_32K_SEL, 4));
+
+ return 0;
+}
+
+const struct clk_ops meson_aoclk_cec_32k_ops = {
+ .recalc_rate = aoclk_cec_32k_recalc_rate,
+ .round_rate = aoclk_cec_32k_round_rate,
+ .set_rate = aoclk_cec_32k_set_rate,
+};
diff --git a/drivers/clk/meson/gxbb-aoclk.c b/drivers/clk/meson/gxbb-aoclk.c
index f61506c..6c161e0 100644
--- a/drivers/clk/meson/gxbb-aoclk.c
+++ b/drivers/clk/meson/gxbb-aoclk.c
@@ -59,6 +59,7 @@
#include <linux/mfd/syscon.h>
#include <linux/regmap.h>
#include <linux/init.h>
+#include <linux/delay.h>
#include <dt-bindings/clock/gxbb-aoclkc.h>
#include <dt-bindings/reset/gxbb-aoclkc.h>
#include "gxbb-aoclk.h"
@@ -105,6 +106,17 @@ static int gxbb_aoclk_do_reset(struct reset_controller_dev *rcdev,
GXBB_AO_GATE(uart2, 5);
GXBB_AO_GATE(ir_blaster, 6);
+static struct aoclk_cec_32k cec_32k_ao = {
+ .lock = &gxbb_aoclk_lock,
+ .hw.init = &(struct clk_init_data) {
+ .name = "cec_32k_ao",
+ .ops = &meson_aoclk_cec_32k_ops,
+ .parent_names = (const char *[]){ "xtal" },
+ .num_parents = 1,
+ .flags = CLK_IGNORE_UNUSED,
+ },
+};
+
static unsigned int gxbb_aoclk_reset[] = {
[RESET_AO_REMOTE] = 16,
[RESET_AO_I2C_MASTER] = 18,
@@ -131,8 +143,9 @@ static int gxbb_aoclk_do_reset(struct reset_controller_dev *rcdev,
[CLKID_AO_UART1] = &uart1_ao.hw,
[CLKID_AO_UART2] = &uart2_ao.hw,
[CLKID_AO_IR_BLASTER] = &ir_blaster_ao.hw,
+ [CLKID_AO_CEC_32K] = &cec_32k_ao.hw,
},
- .num = ARRAY_SIZE(gxbb_aoclk_gate),
+ .num = 7,
};
static int gxbb_aoclkc_probe(struct platform_device *pdev)
@@ -172,6 +185,12 @@ static int gxbb_aoclkc_probe(struct platform_device *pdev)
return ret;
}
+ /* Specific clocks */
+ cec_32k_ao.regmap = regmap;
+ ret = devm_clk_hw_register(dev, &cec_32k_ao.hw);
+ if (ret)
+ return ret;
+
return of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get,
&gxbb_aoclk_onecell_data);
}
diff --git a/drivers/clk/meson/gxbb-aoclk.h b/drivers/clk/meson/gxbb-aoclk.h
index 2e26108..e8604c8 100644
--- a/drivers/clk/meson/gxbb-aoclk.h
+++ b/drivers/clk/meson/gxbb-aoclk.h
@@ -9,7 +9,13 @@
#define __GXBB_AOCLKC_H
/* AO Configuration Clock registers offsets */
+#define AO_RTI_PWR_CNTL_REG1 0x0c
+#define AO_RTI_PWR_CNTL_REG0 0x10
#define AO_RTI_GEN_CNTL_REG0 0x40
+#define AO_OSCIN_CNTL 0x58
+#define AO_CRT_CLK_CNTL1 0x68
+#define AO_RTC_ALT_CLK_CNTL0 0x94
+#define AO_RTC_ALT_CLK_CNTL1 0x98
struct aoclk_gate_regmap {
struct clk_hw hw;
@@ -23,4 +29,14 @@ struct aoclk_gate_regmap {
extern const struct clk_ops meson_aoclk_gate_regmap_ops;
+struct aoclk_cec_32k {
+ struct clk_hw hw;
+ struct regmap *regmap;
+ spinlock_t *lock;
+};
+
+#define to_aoclk_cec_32k(_hw) container_of(_hw, struct aoclk_cec_32k, hw)
+
+extern const struct clk_ops meson_aoclk_cec_32k_ops;
+
#endif /* __GXBB_AOCLKC_H */
--
1.9.1
^ permalink raw reply [flat|nested] 7+ messages in thread