mirror of https://lore.kernel.org/linux-amlogic/
 help / color / mirror / Atom feed
From: martin.blumenstingl@googlemail.com (Martin Blumenstingl)
To: linus-amlogic@lists.infradead.org
Subject: [net-next PATCH v1 2/2] net: stmmac: dwmac-meson8b: make the RGMII TX delay configurable
Date: Thu, 24 Nov 2016 15:34:17 +0100	[thread overview]
Message-ID: <20161124143417.10178-3-martin.blumenstingl@googlemail.com> (raw)
In-Reply-To: <20161124143417.10178-1-martin.blumenstingl@googlemail.com>

Prior to this patch we were using a hardcoded RGMII TX clock delay of
1/4 cycle (= 2ns). This value works for many boards, but unfortunately
not for all (due to the way the actual circuit is designed, sometimes
because the TX delay is enabled in the PHY, etc.).
Making the TX delay on the MAC side configurable allows us to support
all possible hardware combinations (which may or not be out there).

This allows fixing a compatibility issue on some boards, where the
RTL8211F PHY is configured to generate the TX delay. We can now turn
off the TX delay in the MAC, because otherwise we would be applying the
delay twice (which results in non-working TX traffic).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
index 250e4ce..1697d1a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
@@ -23,6 +23,8 @@
 #include <linux/platform_device.h>
 #include <linux/stmmac.h>
 
+#include <dt-bindings/net/dwmac-meson8b.h>
+
 #include "stmmac_platform.h"
 
 #define PRG_ETH0			0x0
@@ -35,10 +37,6 @@
 
 #define PRG_ETH0_TXDLY_SHIFT		5
 #define PRG_ETH0_TXDLY_MASK		GENMASK(6, 5)
-#define PRG_ETH0_TXDLY_OFF		(0x0 << PRG_ETH0_TXDLY_SHIFT)
-#define PRG_ETH0_TXDLY_QUARTER		(0x1 << PRG_ETH0_TXDLY_SHIFT)
-#define PRG_ETH0_TXDLY_HALF		(0x2 << PRG_ETH0_TXDLY_SHIFT)
-#define PRG_ETH0_TXDLY_THREE_QUARTERS	(0x3 << PRG_ETH0_TXDLY_SHIFT)
 
 /* divider for the result of m250_sel */
 #define PRG_ETH0_CLK_M250_DIV_SHIFT	7
@@ -69,6 +67,8 @@ struct meson8b_dwmac {
 
 	struct clk_divider	m25_div;
 	struct clk		*m25_div_clk;
+
+	u32			tx_dly;
 };
 
 static void meson8b_dwmac_mask_bits(struct meson8b_dwmac *dwmac, u32 reg,
@@ -198,7 +198,7 @@ static int meson8b_init_prg_eth(struct meson8b_dwmac *dwmac)
 
 		/* TX clock delay - all known boards use a 1/4 cycle delay */
 		meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_TXDLY_MASK,
-					PRG_ETH0_TXDLY_QUARTER);
+					dwmac->tx_dly << PRG_ETH0_TXDLY_SHIFT);
 		break;
 
 	case PHY_INTERFACE_MODE_RMII:
@@ -279,6 +279,12 @@ static int meson8b_dwmac_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
+	ret = of_property_read_u32(pdev->dev.of_node, "amlogic,tx-delay",
+				   &dwmac->tx_dly);
+	if (ret)
+		/* default to 1/4 cycle (= 2ns for RGMII) */
+		dwmac->tx_dly = DWMAC_MESON8B_TXDLY_QUARTER_CYCLE;
+
 	ret = meson8b_init_clk(dwmac);
 	if (ret)
 		return ret;
-- 
2.10.2

  parent reply	other threads:[~2016-11-24 14:34 UTC|newest]

Thread overview: 45+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-11-24 14:34 [net-next PATCH v1 0/2] stmmac: dwmac-meson8b: configurable RGMII TX delay Martin Blumenstingl
2016-11-24 14:34 ` [net-next PATCH v1 1/2] net: dt-bindings: add RGMII TX delay configuration to meson8b-dwmac Martin Blumenstingl
2016-11-24 15:48   ` Andrew Lunn
2016-11-24 16:52     ` Martin Blumenstingl
2016-11-24 14:34 ` Martin Blumenstingl [this message]
2016-11-24 15:56 ` [net-next PATCH v1 0/2] stmmac: dwmac-meson8b: configurable RGMII TX delay Jerome Brunet
2016-11-24 17:05   ` Martin Blumenstingl
2016-11-24 18:55     ` Florian Fainelli
2016-11-25  0:41       ` Martin Blumenstingl
2016-11-25 11:13       ` Sebastian Frias
2016-11-25 12:01         ` Måns Rullgård
2016-11-25 17:44         ` Florian Fainelli
2016-11-28 10:34           ` Sebastian Frias
2016-11-25  9:53     ` Jerome Brunet
2016-11-24 16:08 ` Jerome Brunet
2016-11-25  8:59   ` Giuseppe CAVALLARO
2016-11-25 13:01 ` [PATCH v2 0/7] " Martin Blumenstingl
2016-11-25 13:01   ` [PATCH v2 1/7] net: dt-bindings: add RGMII TX delay configuration to meson8b-dwmac Martin Blumenstingl
2016-11-30 21:44     ` Rob Herring
2016-11-30 22:33       ` Martin Blumenstingl
2016-11-25 13:01   ` [PATCH v2 2/7] net: stmmac: dwmac-meson8b: make the RGMII TX delay configurable Martin Blumenstingl
2016-11-25 13:01   ` [PATCH v2 3/7] ARM64: dts: meson-gx: move the MDIO node to meson-gx Martin Blumenstingl
2016-11-25 13:01   ` [PATCH v2 4/7] ARM64: dts: meson-gxbb-odroidc2: add reset for the ethernet PHY Martin Blumenstingl
2016-11-25 13:01   ` [PATCH v2 5/7] ARM64: dts: meson-gxbb-p20x: " Martin Blumenstingl
2016-11-25 13:01   ` [PATCH v2 6/7] ARM64: dts: meson-gxbb-vega-s95: " Martin Blumenstingl
2016-11-25 13:01   ` [PATCH v2 7/7] ARM64: dts: amlogic: add the ethernet TX delay configuration Martin Blumenstingl
2016-11-25 13:41   ` [PATCH v2 0/7] stmmac: dwmac-meson8b: configurable RGMII TX delay David Laight
2016-11-28  1:33   ` David Miller
2016-12-02 23:52     ` Martin Blumenstingl
2016-11-28 13:25   ` Neil Armstrong
2016-12-02 23:32   ` [PATCH net-next v3 0/2] " Martin Blumenstingl
2016-12-02 23:32     ` [PATCH net-next v3 1/2] net: dt-bindings: add RGMII TX delay configuration to meson8b-dwmac Martin Blumenstingl
2016-12-09 21:31       ` Rob Herring
2016-12-02 23:32     ` [PATCH net-next v3 2/2] net: stmmac: dwmac-meson8b: make the RGMII TX delay configurable Martin Blumenstingl
2016-12-17 18:21     ` [PATCH net-next v4 0/2] stmmac: dwmac-meson8b: configurable RGMII TX delay Martin Blumenstingl
2016-12-17 18:21       ` [PATCH net-next v4 1/2] net: dt-bindings: add RGMII TX delay configuration to meson8b-dwmac Martin Blumenstingl
2016-12-17 18:21       ` [PATCH net-next v4 2/2] net: stmmac: dwmac-meson8b: make the RGMII TX delay configurable Martin Blumenstingl
2016-12-18 15:49         ` David Miller
2016-12-18 16:13           ` Martin Blumenstingl
2017-01-09 17:37             ` Martin Blumenstingl
2017-01-20 13:47             ` Martin Blumenstingl
2017-01-22 22:02       ` [PATCH net-next v5 0/2] stmmac: dwmac-meson8b: configurable RGMII TX delay Martin Blumenstingl
2017-01-22 22:02         ` [PATCH net-next v5 1/2] net: dt-bindings: add RGMII TX delay configuration to meson8b-dwmac Martin Blumenstingl
2017-01-22 22:02         ` [PATCH net-next v5 2/2] net: stmmac: dwmac-meson8b: make the RGMII TX delay configurable Martin Blumenstingl
2017-01-24 18:36         ` [PATCH net-next v5 0/2] stmmac: dwmac-meson8b: configurable RGMII TX delay David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20161124143417.10178-3-martin.blumenstingl@googlemail.com \
    --to=martin.blumenstingl@googlemail.com \
    --cc=linus-amlogic@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®