mirror of https://lore.kernel.org/linux-amlogic/
 help / color / mirror / Atom feed
From: yixun.lan@amlogic.com (Yixun Lan)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH] ARM64: dts: meson-axg: add ethernet mac controller
Date: Mon, 13 Nov 2017 16:01:55 +0800	[thread overview]
Message-ID: <20171113080155.2463-1-yixun.lan@amlogic.com> (raw)

Add DT info for the stmmac ethernet MAC which found in
the Amlogic's Meson-AXG SoC, also describe the ethernet
pinctrl & clock information here.

This is tested in the S400 dev board which use a RTL8211F PHY,
and the pins connect to the 'eth_rgmii_y_pins' group.

Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
 arch/arm64/boot/dts/amlogic/meson-axg-s400.dts |  7 ++++
 arch/arm64/boot/dts/amlogic/meson-axg.dtsi     | 53 ++++++++++++++++++++++++++
 2 files changed, 60 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
index 9eb6aaee155d..7b39a9fe2b0f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
@@ -21,3 +21,10 @@
 	status = "okay";
 };
 
+&ethmac {
+	status = "okay";
+	phy-mode = "rgmii";
+
+	pinctrl-0 = <&eth_rgmii_y_pins>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 65945c6c8b65..57faaa9d8013 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -157,6 +157,19 @@
 			#address-cells = <0>;
 		};
 
+		ethmac: ethernet at ff3f0000 {
+			compatible = "amlogic,meson-axg-dwmac", "amlogic,meson-gxbb-dwmac", "snps,dwmac";
+			reg = <0x0 0xff3f0000 0x0 0x10000
+				0x0 0xff634540 0x0 0x8>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "macirq";
+			status = "disabled";
+			clocks = <&clkc CLKID_ETH>,
+				 <&clkc CLKID_FCLK_DIV2>,
+				 <&clkc CLKID_MPLL2>;
+			clock-names = "stmmaceth", "clkin0", "clkin1";
+		};
+
 		hiubus: hiubus at ff63c000 {
 			compatible = "simple-bus";
 			reg = <0x0 0xff63c000 0x0 0x1c00>;
@@ -203,6 +216,46 @@
 					#gpio-cells = <2>;
 					gpio-ranges = <&pinctrl_periphs 0 0 86>;
 				};
+
+				eth_rgmii_x_pins: eth-x-rgmii {
+					mux {
+						groups = "eth_mdio_x",
+						       "eth_mdc_x",
+						       "eth_rgmii_rx_clk_x",
+						       "eth_rx_dv_x",
+						       "eth_rxd0_x",
+						       "eth_rxd1_x",
+						       "eth_rxd2_rgmii",
+						       "eth_rxd3_rgmii",
+						       "eth_rgmii_tx_clk",
+						       "eth_txen_x",
+						       "eth_txd0_x",
+						       "eth_txd1_x",
+						       "eth_txd2_rgmii",
+						       "eth_txd3_rgmii";
+						function = "eth";
+					};
+				};
+
+				eth_rgmii_y_pins: eth-y-rgmii {
+					mux {
+						groups = "eth_mdio_y",
+						       "eth_mdc_y",
+						       "eth_rgmii_rx_clk_y",
+						       "eth_rx_dv_y",
+						       "eth_rxd0_y",
+						       "eth_rxd1_y",
+						       "eth_rxd2_rgmii",
+						       "eth_rxd3_rgmii",
+						       "eth_rgmii_tx_clk",
+						       "eth_txen_y",
+						       "eth_txd0_y",
+						       "eth_txd1_y",
+						       "eth_txd2_rgmii",
+						       "eth_txd3_rgmii";
+						function = "eth";
+					};
+				};
 			};
 		};
 
-- 
2.14.1

             reply	other threads:[~2017-11-13  8:01 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-11-13  8:01 Yixun Lan [this message]
2017-11-17 13:12 ` Neil Armstrong
2017-12-06 20:07 ` Kevin Hilman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171113080155.2463-1-yixun.lan@amlogic.com \
    --to=yixun.lan@amlogic.com \
    --cc=linus-amlogic@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®