From: Carlo Caione <ccaione@baylibre.com>
To: robh+dt@kernel.org, mark.rutland@arm.com, khilman@baylibre.com,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org,
martin.blumenstingl@googlemail.com
Cc: Carlo Caione <ccaione@baylibre.com>
Subject: [PATCH 2/2] arm64: dts: meson: Remove eee-broken-1000t quirk
Date: Tue, 4 Dec 2018 16:04:47 +0000 [thread overview]
Message-ID: <20181204160447.27869-3-ccaione@baylibre.com> (raw)
In-Reply-To: <20181204160447.27869-1-ccaione@baylibre.com>
The change in the macirq IRQ type also solved another long standing
issue affecting this SoC/PHY where EEE was causing the network
connection to die after stressing it with iperf3 (even though much
sooner). It's now possible to remove the 'eee-broken-1000t' quirk as
well.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
---
arch/arm/boot/dts/meson8b-odroidc1.dts | 1 -
arch/arm64/boot/dts/amlogic/meson-axg-s400.dts | 1 -
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 1 -
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi | 1 -
4 files changed, 4 deletions(-)
diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
index 58669abda259..a951a6632d0c 100644
--- a/arch/arm/boot/dts/meson8b-odroidc1.dts
+++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
@@ -221,7 +221,6 @@
/* Realtek RTL8211F (0x001cc916) */
eth_phy: ethernet-phy@0 {
reg = <0>;
- eee-broken-1000t;
interrupt-parent = <&gpio_intc>;
/* GPIOH_3 */
interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
index 18778ada7bd3..4d57363ac536 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
@@ -357,7 +357,6 @@
eth_phy0: ethernet-phy@0 {
/* Realtek RTL8211F (0x001cc916) */
reg = <0>;
- eee-broken-1000t;
};
};
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index 54954b314a45..f8d1cedbe600 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -143,7 +143,6 @@
interrupt-parent = <&gpio_intc>;
/* MAC_INTR on GPIOZ_15 */
interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
- eee-broken-1000t;
};
};
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
index 70325b273bd2..ec09bb5792b7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
@@ -142,7 +142,6 @@
eth_phy0: ethernet-phy@0 {
/* Realtek RTL8211F (0x001cc916) */
reg = <0>;
- eee-broken-1000t;
};
};
};
--
2.19.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2018-12-04 16:05 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-04 16:04 [PATCH 0/2] meson: Fix IRQ trigger type Carlo Caione
2018-12-04 16:04 ` [PATCH 1/2] arm64: dts: meson: Fix IRQ trigger type for macirq Carlo Caione
2018-12-04 19:52 ` Neil Armstrong
2018-12-05 1:12 ` Kevin Hilman
2018-12-04 16:04 ` Carlo Caione [this message]
2018-12-04 19:59 ` [PATCH 0/2] meson: Fix IRQ trigger type Martin Blumenstingl
2018-12-04 20:51 ` Carlo Caione
2018-12-06 12:43 ` Emiliano Ingrassia
2018-12-06 13:17 ` Carlo Caione
2018-12-06 15:52 ` Emiliano Ingrassia
2018-12-06 18:51 ` Emiliano Ingrassia
2018-12-07 10:49 ` Jerome Brunet
2018-12-07 11:03 ` Carlo Caione
2018-12-07 18:33 ` Emiliano Ingrassia
2018-12-07 18:28 ` Emiliano Ingrassia
2018-12-07 19:58 ` Jerome Brunet
2018-12-07 21:56 ` Martin Blumenstingl
2018-12-06 13:26 ` Jerome Brunet
2018-12-06 16:24 ` Emiliano Ingrassia
2018-12-06 13:26 ` Jerome Brunet
2018-12-07 4:17 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181204160447.27869-3-ccaione@baylibre.com \
--to=ccaione@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=martin.blumenstingl@googlemail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®