Re: [PATCH 0/2] meson: Fix IRQ trigger type

[Emiliano Ingrassia <ingrassia@epigenesys.com>]

On Fri, Dec 07, 2018 at 11:03:20AM +0000, Carlo Caione wrote:
> On Fri, 2018-12-07 at 11:49 +0100, Jerome Brunet wrote:
> > On Thu, 2018-12-06 at 19:51 +0100, Emiliano Ingrassia wrote:
> > > Hi Carlo,
> > >
> > > I keep running tests with packet generator,
> > > using nload to show bandwidth usage.
> > >
> > > Here is my test results with packet generators
> > > both running on laptop and board with rate 1 Gbps.
> >
> > Testing in UDP is unlikely to give us clear picture of anything for
> > this sort
> > of fixes.
> >
> > All your test seems in show it the fact the Amlogic SoC usually
> > prioritize the
> > TX traffic over RX, which is something we've known about for a while.
> >
> > It would be helpful if you could provide TCP figures with a traffic
> > generator
> > we can all share an inspect, such as iperf3
>
> For reference you can use something like:
>
> iperf3 -c ${IP} -i ${IPERF_LOGPERIOD} -w 400k -p ${PORT} -t ${DURATION}
>

Thanks Carlo. Just to be consistent, what value did you use for DURATION?

> Cheers,
>
> --
> Carlo Caione
>

Regards,

Emiliano

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic