mirror of https://lore.kernel.org/linux-amlogic/
 help / color / mirror / Atom feed
From: Neil Armstrong <narmstrong@baylibre.com>
To: agust@denx.de, u-boot@lists.denx.de
Cc: mjourdan@baylibre.com, linux-amlogic@lists.infradead.org,
	jbrunet@baylibre.com, Neil Armstrong <narmstrong@baylibre.com>
Subject: [PATCH u-boot 09/11] configs: meson64: use vidconsole and usbkbd if enabled
Date: Tue, 15 Jan 2019 17:17:57 +0100	[thread overview]
Message-ID: <20190115161759.1657-10-narmstrong@baylibre.com> (raw)
In-Reply-To: <20190115161759.1657-1-narmstrong@baylibre.com>

Allows displaying the console via video and using a USB keyboard.

Also enables CONFIG_SPLASH_SCREEN if using video.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
---
 include/configs/meson64.h | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/include/configs/meson64.h b/include/configs/meson64.h
index 40ac079dfc..d82a674270 100644
--- a/include/configs/meson64.h
+++ b/include/configs/meson64.h
@@ -16,6 +16,26 @@
 #define GICC_BASE			0xc4302000
 #endif
 
+/* For splashscreen */
+#ifdef CONFIG_DM_VIDEO
+#define CONFIG_VIDEO_BMP_RLE8
+#define CONFIG_BMP_16BPP
+#define CONFIG_BMP_24BPP
+#define CONFIG_BMP_32BPP
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_SPLASH_SCREEN_ALIGN
+#define STDOUT_CFG "vidconsole,serial"
+#else
+#define STDOUT_CFG "serial"
+#endif
+
+#ifdef CONFIG_USB_KEYBOARD
+#define STDIN_CFG "usbkbd,serial"
+#define CONFIG_PREBOOT "usb start"
+#else
+#define STDIN_CFG "serial"
+#endif
+
 #define CONFIG_CPU_ARMV8
 #define CONFIG_REMAKE_ELF
 #define CONFIG_ENV_SIZE			0x2000
@@ -59,6 +79,9 @@
 
 #ifndef CONFIG_EXTRA_ENV_SETTINGS
 #define CONFIG_EXTRA_ENV_SETTINGS \
+	"stdin=" STDIN_CFG "\0" \
+	"stdout=" STDOUT_CFG "\0" \
+	"stderr=" STDOUT_CFG "\0" \
 	"fdt_addr_r=0x08008000\0" \
 	"scriptaddr=0x08000000\0" \
 	"kernel_addr_r=0x08080000\0" \
-- 
2.20.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

  parent reply	other threads:[~2019-01-15 16:18 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-15 16:17 [PATCH u-boot 00/11] meson: add support for Video Output Neil Armstrong
2019-01-15 16:17 ` [PATCH u-boot 01/11] power: domain: meson-gx-pwrc-vpu: add missing depends Neil Armstrong
2019-01-28 19:58   ` Anatolij Gustschin
2019-01-15 16:17 ` [PATCH u-boot 02/11] video: dw_hdmi: support SoC specific read/write ops Neil Armstrong
2019-01-28 16:00   ` Anatolij Gustschin
2019-01-15 16:17 ` [PATCH u-boot 03/11] video: dw_hdmi: add support for color conversion Neil Armstrong
2019-01-28 16:01   ` Anatolij Gustschin
2019-01-15 16:17 ` [PATCH u-boot 04/11] video: Add Meson Video Processing Unit Driver Neil Armstrong
2019-01-28 19:56   ` Anatolij Gustschin
2019-01-29  8:26     ` Neil Armstrong
2019-01-29 10:28       ` Anatolij Gustschin
2019-01-15 16:17 ` [PATCH u-boot 05/11] arm64: dts: meson-gx: vpu should be probed before relocation Neil Armstrong
2019-01-15 16:17 ` [PATCH u-boot 06/11] arm64: dts: meson-gx: Add hdmi_5v regulator as hdmi tx supply Neil Armstrong
2019-01-15 16:17 ` [PATCH u-boot 07/11] arm64: dts: meson-gx: add hhi reg entry to hdmi_tx Neil Armstrong
2019-01-15 16:17 ` [PATCH u-boot 08/11] arm: meson: board-gx: Setup VPU in fdt Neil Armstrong
2019-01-28 20:07   ` Anatolij Gustschin
2019-01-15 16:17 ` Neil Armstrong [this message]
2019-01-28 20:09   ` [PATCH u-boot 09/11] configs: meson64: use vidconsole and usbkbd if enabled Anatolij Gustschin
2019-01-15 16:17 ` [PATCH u-boot 10/11] arm: meson64: enable console mux and console env by default Neil Armstrong
2019-01-28 20:11   ` Anatolij Gustschin
2019-01-15 16:17 ` [PATCH u-boot 11/11] arm: libretech-cc: enable video " Neil Armstrong
2019-01-28 20:12   ` Anatolij Gustschin
2019-01-28  9:10 ` [PATCH u-boot 00/11] meson: add support for Video Output Neil Armstrong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190115161759.1657-10-narmstrong@baylibre.com \
    --to=narmstrong@baylibre.com \
    --cc=agust@denx.de \
    --cc=jbrunet@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=mjourdan@baylibre.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®