* [PATCH AUTOSEL 4.14 039/170] iio: adc: meson-saradc: check for devm_kasprintf failure
[not found] <20190128161200.55107-1-sashal@kernel.org>
@ 2019-01-28 16:09 ` Sasha Levin
2019-01-28 16:09 ` [PATCH AUTOSEL 4.14 040/170] iio: adc: meson-saradc: fix internal clock names Sasha Levin
` (2 subsequent siblings)
3 siblings, 0 replies; 4+ messages in thread
From: Sasha Levin @ 2019-01-28 16:09 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Sasha Levin, linux-iio, linux-amlogic, Jonathan Cameron,
Nicholas Mc Guire
From: Nicholas Mc Guire <hofrat@osadl.org>
[ Upstream commit aad172b017617994343e36d8659c69e14cd694fd ]
devm_kasprintf() may return NULL on failure of internal allocation thus
the assignments to init.name are not safe if not checked. On error
meson_sar_adc_clk_init() returns negative values so -ENOMEM in the
(unlikely) failure case of devm_kasprintf() should be fine here.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Fixes: 3adbf3427330 ("iio: adc: add a driver for the SAR ADC found in Amlogic Meson SoCs")
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/iio/adc/meson_saradc.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c
index 11484cb38b84..9a52a91166d2 100644
--- a/drivers/iio/adc/meson_saradc.c
+++ b/drivers/iio/adc/meson_saradc.c
@@ -585,6 +585,9 @@ static int meson_sar_adc_clk_init(struct iio_dev *indio_dev,
init.name = devm_kasprintf(&indio_dev->dev, GFP_KERNEL, "%pOF#adc_div",
indio_dev->dev.of_node);
+ if (!init.name)
+ return -ENOMEM;
+
init.flags = 0;
init.ops = &clk_divider_ops;
clk_parents[0] = __clk_get_name(priv->clkin);
@@ -604,6 +607,9 @@ static int meson_sar_adc_clk_init(struct iio_dev *indio_dev,
init.name = devm_kasprintf(&indio_dev->dev, GFP_KERNEL, "%pOF#adc_en",
indio_dev->dev.of_node);
+ if (!init.name)
+ return -ENOMEM;
+
init.flags = CLK_SET_RATE_PARENT;
init.ops = &clk_gate_ops;
clk_parents[0] = __clk_get_name(priv->adc_div_clk);
--
2.19.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 4+ messages in thread* [PATCH AUTOSEL 4.14 040/170] iio: adc: meson-saradc: fix internal clock names
[not found] <20190128161200.55107-1-sashal@kernel.org>
2019-01-28 16:09 ` [PATCH AUTOSEL 4.14 039/170] iio: adc: meson-saradc: check for devm_kasprintf failure Sasha Levin
@ 2019-01-28 16:09 ` Sasha Levin
2019-01-28 16:11 ` [PATCH AUTOSEL 4.14 135/170] pinctrl: meson: meson8: fix the GPIO function for the GPIOAO pins Sasha Levin
2019-01-28 16:11 ` [PATCH AUTOSEL 4.14 136/170] pinctrl: meson: meson8b: " Sasha Levin
3 siblings, 0 replies; 4+ messages in thread
From: Sasha Levin @ 2019-01-28 16:09 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Martin Blumenstingl, Sasha Levin, linux-amlogic, linux-iio,
Jonathan Cameron
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
[ Upstream commit 50314f98b0ac468218e7c9af8c99f215a35436df ]
Before this patch we are registering the internal clocks (for example on
Meson8b, where the SAR ADC IP block implements the divider and gate
clocks) with the following names:
- /soc/cbus@c1100000/adc@8680#adc_div
- /soc/cbus@c1100000/adc@8680#adc_en
This is bad because the common clock framework uses the clock to create
a directory in <debugfs>/clk. With such name, the directory creation
(silently) fails and the debugfs entry ends up being created at the
debugfs root.
With this change, the new clock names are:
- c1108680.adc#adc_div
- c1108680.adc#adc_en
This matches the clock naming scheme used in the PWM, Ethernet and MMC
drivers. It also fixes the problem with debugfs.
The idea is shamelessly taken from commit b96e9eb62841c5 ("pwm: meson:
Fix mux clock names").
Fixes: 3921db46a8c5bc ("iio: Convert to using %pOF instead of full_name")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/iio/adc/meson_saradc.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c
index 9a52a91166d2..2515badf8b28 100644
--- a/drivers/iio/adc/meson_saradc.c
+++ b/drivers/iio/adc/meson_saradc.c
@@ -583,8 +583,8 @@ static int meson_sar_adc_clk_init(struct iio_dev *indio_dev,
struct clk_init_data init;
const char *clk_parents[1];
- init.name = devm_kasprintf(&indio_dev->dev, GFP_KERNEL, "%pOF#adc_div",
- indio_dev->dev.of_node);
+ init.name = devm_kasprintf(&indio_dev->dev, GFP_KERNEL, "%s#adc_div",
+ dev_name(indio_dev->dev.parent));
if (!init.name)
return -ENOMEM;
@@ -605,8 +605,8 @@ static int meson_sar_adc_clk_init(struct iio_dev *indio_dev,
if (WARN_ON(IS_ERR(priv->adc_div_clk)))
return PTR_ERR(priv->adc_div_clk);
- init.name = devm_kasprintf(&indio_dev->dev, GFP_KERNEL, "%pOF#adc_en",
- indio_dev->dev.of_node);
+ init.name = devm_kasprintf(&indio_dev->dev, GFP_KERNEL, "%s#adc_en",
+ dev_name(indio_dev->dev.parent));
if (!init.name)
return -ENOMEM;
--
2.19.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 4+ messages in thread* [PATCH AUTOSEL 4.14 135/170] pinctrl: meson: meson8: fix the GPIO function for the GPIOAO pins
[not found] <20190128161200.55107-1-sashal@kernel.org>
2019-01-28 16:09 ` [PATCH AUTOSEL 4.14 039/170] iio: adc: meson-saradc: check for devm_kasprintf failure Sasha Levin
2019-01-28 16:09 ` [PATCH AUTOSEL 4.14 040/170] iio: adc: meson-saradc: fix internal clock names Sasha Levin
@ 2019-01-28 16:11 ` Sasha Levin
2019-01-28 16:11 ` [PATCH AUTOSEL 4.14 136/170] pinctrl: meson: meson8b: " Sasha Levin
3 siblings, 0 replies; 4+ messages in thread
From: Sasha Levin @ 2019-01-28 16:11 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Martin Blumenstingl, Sasha Levin, Linus Walleij, linux-amlogic,
linux-gpio
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
[ Upstream commit 42f9b48cc5402be11d2364275eb18c257d2a79e8 ]
The GPIOAO pins (as well as the two exotic GPIO_BSD_EN and GPIO_TEST_N)
only belong to the pin controller in the AO domain. With the current
definition these pins cannot be referred to in .dts files as group
(which is possible on GXBB and GXL for example).
Add a separate "gpio_aobus" function to fix the mapping between the pin
controller and the GPIO pins in the AO domain. This is similar to how
the GXBB and GXL drivers implement this functionality.
Fixes: 9dab1868ec0db4 ("pinctrl: amlogic: Make driver independent from two-domain configuration")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pinctrl/meson/pinctrl-meson8.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/pinctrl/meson/pinctrl-meson8.c b/drivers/pinctrl/meson/pinctrl-meson8.c
index 970f6f14502c..591b01657378 100644
--- a/drivers/pinctrl/meson/pinctrl-meson8.c
+++ b/drivers/pinctrl/meson/pinctrl-meson8.c
@@ -808,7 +808,9 @@ static const char * const gpio_groups[] = {
"BOOT_5", "BOOT_6", "BOOT_7", "BOOT_8", "BOOT_9",
"BOOT_10", "BOOT_11", "BOOT_12", "BOOT_13", "BOOT_14",
"BOOT_15", "BOOT_16", "BOOT_17", "BOOT_18",
+};
+static const char * const gpio_aobus_groups[] = {
"GPIOAO_0", "GPIOAO_1", "GPIOAO_2", "GPIOAO_3",
"GPIOAO_4", "GPIOAO_5", "GPIOAO_6", "GPIOAO_7",
"GPIOAO_8", "GPIOAO_9", "GPIOAO_10", "GPIOAO_11",
@@ -1030,6 +1032,7 @@ static struct meson_pmx_func meson8_cbus_functions[] = {
};
static struct meson_pmx_func meson8_aobus_functions[] = {
+ FUNCTION(gpio_aobus),
FUNCTION(uart_ao),
FUNCTION(remote),
FUNCTION(i2c_slave_ao),
--
2.19.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 4+ messages in thread* [PATCH AUTOSEL 4.14 136/170] pinctrl: meson: meson8b: fix the GPIO function for the GPIOAO pins
[not found] <20190128161200.55107-1-sashal@kernel.org>
` (2 preceding siblings ...)
2019-01-28 16:11 ` [PATCH AUTOSEL 4.14 135/170] pinctrl: meson: meson8: fix the GPIO function for the GPIOAO pins Sasha Levin
@ 2019-01-28 16:11 ` Sasha Levin
3 siblings, 0 replies; 4+ messages in thread
From: Sasha Levin @ 2019-01-28 16:11 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Martin Blumenstingl, Sasha Levin, Linus Walleij, linux-amlogic,
linux-gpio
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
[ Upstream commit 2b745ac3cceb8fc1d9985990c8241a821ea97e53 ]
The GPIOAO pins (as well as the two exotic GPIO_BSD_EN and GPIO_TEST_N)
only belong to the pin controller in the AO domain. With the current
definition these pins cannot be referred to in .dts files as group
(which is possible on GXBB and GXL for example).
Add a separate "gpio_aobus" function to fix the mapping between the pin
controller and the GPIO pins in the AO domain. This is similar to how
the GXBB and GXL drivers implement this functionality.
Fixes: 9dab1868ec0db4 ("pinctrl: amlogic: Make driver independent from two-domain configuration")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pinctrl/meson/pinctrl-meson8b.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
diff --git a/drivers/pinctrl/meson/pinctrl-meson8b.c b/drivers/pinctrl/meson/pinctrl-meson8b.c
index 71f216b5b0b9..a6fff215e60f 100644
--- a/drivers/pinctrl/meson/pinctrl-meson8b.c
+++ b/drivers/pinctrl/meson/pinctrl-meson8b.c
@@ -649,16 +649,18 @@ static const char * const gpio_groups[] = {
"BOOT_10", "BOOT_11", "BOOT_12", "BOOT_13", "BOOT_14",
"BOOT_15", "BOOT_16", "BOOT_17", "BOOT_18",
- "GPIOAO_0", "GPIOAO_1", "GPIOAO_2", "GPIOAO_3",
- "GPIOAO_4", "GPIOAO_5", "GPIOAO_6", "GPIOAO_7",
- "GPIOAO_8", "GPIOAO_9", "GPIOAO_10", "GPIOAO_11",
- "GPIOAO_12", "GPIOAO_13", "GPIO_BSD_EN", "GPIO_TEST_N",
-
"DIF_0_P", "DIF_0_N", "DIF_1_P", "DIF_1_N",
"DIF_2_P", "DIF_2_N", "DIF_3_P", "DIF_3_N",
"DIF_4_P", "DIF_4_N"
};
+static const char * const gpio_aobus_groups[] = {
+ "GPIOAO_0", "GPIOAO_1", "GPIOAO_2", "GPIOAO_3",
+ "GPIOAO_4", "GPIOAO_5", "GPIOAO_6", "GPIOAO_7",
+ "GPIOAO_8", "GPIOAO_9", "GPIOAO_10", "GPIOAO_11",
+ "GPIOAO_12", "GPIOAO_13", "GPIO_BSD_EN", "GPIO_TEST_N"
+};
+
static const char * const sd_a_groups[] = {
"sd_d0_a", "sd_d1_a", "sd_d2_a", "sd_d3_a", "sd_clk_a",
"sd_cmd_a"
@@ -874,6 +876,7 @@ static struct meson_pmx_func meson8b_cbus_functions[] = {
};
static struct meson_pmx_func meson8b_aobus_functions[] = {
+ FUNCTION(gpio_aobus),
FUNCTION(uart_ao),
FUNCTION(uart_ao_b),
FUNCTION(i2c_slave_ao),
--
2.19.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 4+ messages in thread