* [PATCH AUTOSEL 4.14 029/127] mmc: meson-gx: make sure the descriptor is stopped on errors
[not found] <20191122055544.3299-1-sashal@kernel.org>
@ 2019-11-22 5:54 ` Sasha Levin
0 siblings, 0 replies; only message in thread
From: Sasha Levin @ 2019-11-22 5:54 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Sasha Levin, Ulf Hansson, linux-mmc, linux-amlogic,
linux-arm-kernel, Jerome Brunet
From: Jerome Brunet <jbrunet@baylibre.com>
[ Upstream commit 18f92bc02f1739b5c4d5b70009fbb7eada45bca3 ]
On errors, if we don't stop the descriptor chain, it may continue to
run and raise IRQ after we have called mmc_request_done(). This is bad
because we won't be able to get cmd anymore and properly deal with the
IRQ.
This patch makes sure the descriptor chain is stopped before
calling mmc_request_done()
Fixes: 79ed05e329c3 ("mmc: meson-gx: add support for descriptor chain mode")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mmc/host/meson-gx-mmc.c | 73 ++++++++++++++++++++++++++++-----
1 file changed, 63 insertions(+), 10 deletions(-)
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index 08a55c2e96e1b..53ce1bb83d2c5 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -21,6 +21,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/delay.h>
#include <linux/device.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
@@ -74,9 +75,11 @@
#define CFG_CLK_ALWAYS_ON BIT(18)
#define CFG_CHK_DS BIT(20)
#define CFG_AUTO_CLK BIT(23)
+#define CFG_ERR_ABORT BIT(27)
#define SD_EMMC_STATUS 0x48
#define STATUS_BUSY BIT(31)
+#define STATUS_DESC_BUSY BIT(30)
#define STATUS_DATI GENMASK(23, 16)
#define SD_EMMC_IRQ_EN 0x4c
@@ -905,6 +908,7 @@ static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd)
cmd_cfg |= FIELD_PREP(CMD_CFG_CMD_INDEX_MASK, cmd->opcode);
cmd_cfg |= CMD_CFG_OWNER; /* owned by CPU */
+ cmd_cfg |= CMD_CFG_ERROR; /* stop in case of error */
meson_mmc_set_response_bits(cmd, &cmd_cfg);
@@ -999,6 +1003,17 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id)
u32 irq_en, status, raw_status;
irqreturn_t ret = IRQ_NONE;
+ irq_en = readl(host->regs + SD_EMMC_IRQ_EN);
+ raw_status = readl(host->regs + SD_EMMC_STATUS);
+ status = raw_status & irq_en;
+
+ if (!status) {
+ dev_dbg(host->dev,
+ "Unexpected IRQ! irq_en 0x%08x - status 0x%08x\n",
+ irq_en, raw_status);
+ return IRQ_NONE;
+ }
+
if (WARN_ON(!host) || WARN_ON(!host->cmd))
return IRQ_NONE;
@@ -1006,22 +1021,18 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id)
cmd = host->cmd;
data = cmd->data;
- irq_en = readl(host->regs + SD_EMMC_IRQ_EN);
- raw_status = readl(host->regs + SD_EMMC_STATUS);
- status = raw_status & irq_en;
-
cmd->error = 0;
if (status & IRQ_CRC_ERR) {
dev_dbg(host->dev, "CRC Error - status 0x%08x\n", status);
cmd->error = -EILSEQ;
- ret = IRQ_HANDLED;
+ ret = IRQ_WAKE_THREAD;
goto out;
}
if (status & IRQ_TIMEOUTS) {
dev_dbg(host->dev, "Timeout - status 0x%08x\n", status);
cmd->error = -ETIMEDOUT;
- ret = IRQ_HANDLED;
+ ret = IRQ_WAKE_THREAD;
goto out;
}
@@ -1046,17 +1057,49 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id)
/* ack all enabled interrupts */
writel(irq_en, host->regs + SD_EMMC_STATUS);
+ if (cmd->error) {
+ /* Stop desc in case of errors */
+ u32 start = readl(host->regs + SD_EMMC_START);
+
+ start &= ~START_DESC_BUSY;
+ writel(start, host->regs + SD_EMMC_START);
+ }
+
if (ret == IRQ_HANDLED)
meson_mmc_request_done(host->mmc, cmd->mrq);
- else if (ret == IRQ_NONE)
- dev_warn(host->dev,
- "Unexpected IRQ! status=0x%08x, irq_en=0x%08x\n",
- raw_status, irq_en);
spin_unlock(&host->lock);
return ret;
}
+static int meson_mmc_wait_desc_stop(struct meson_host *host)
+{
+ int loop;
+ u32 status;
+
+ /*
+ * It may sometimes take a while for it to actually halt. Here, we
+ * are giving it 5ms to comply
+ *
+ * If we don't confirm the descriptor is stopped, it might raise new
+ * IRQs after we have called mmc_request_done() which is bad.
+ */
+ for (loop = 50; loop; loop--) {
+ status = readl(host->regs + SD_EMMC_STATUS);
+ if (status & (STATUS_BUSY | STATUS_DESC_BUSY))
+ udelay(100);
+ else
+ break;
+ }
+
+ if (status & (STATUS_BUSY | STATUS_DESC_BUSY)) {
+ dev_err(host->dev, "Timed out waiting for host to stop\n");
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
static irqreturn_t meson_mmc_irq_thread(int irq, void *dev_id)
{
struct meson_host *host = dev_id;
@@ -1067,6 +1110,13 @@ static irqreturn_t meson_mmc_irq_thread(int irq, void *dev_id)
if (WARN_ON(!cmd))
return IRQ_NONE;
+ if (cmd->error) {
+ meson_mmc_wait_desc_stop(host);
+ meson_mmc_request_done(host->mmc, cmd->mrq);
+
+ return IRQ_HANDLED;
+ }
+
data = cmd->data;
if (meson_mmc_bounce_buf_read(data)) {
xfer_bytes = data->blksz * data->blocks;
@@ -1107,6 +1157,9 @@ static void meson_mmc_cfg_init(struct meson_host *host)
cfg |= FIELD_PREP(CFG_RC_CC_MASK, ilog2(SD_EMMC_CFG_CMD_GAP));
cfg |= FIELD_PREP(CFG_BLK_LEN_MASK, ilog2(SD_EMMC_CFG_BLK_SIZE));
+ /* abort chain on R/W errors */
+ cfg |= CFG_ERR_ABORT;
+
writel(cfg, host->regs + SD_EMMC_CFG);
}
--
2.20.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] only message in thread