* [PATCH 34/51] drm/meson: Drop explicit drm_mode_config_cleanup call [not found] <20200323144950.3018436-1-daniel.vetter@ffwll.ch> @ 2020-03-23 14:49 ` Daniel Vetter 0 siblings, 0 replies; 4+ messages in thread From: Daniel Vetter @ 2020-03-23 14:49 UTC (permalink / raw) To: DRI Development Cc: Neil Armstrong, Daniel Vetter, Intel Graphics Development, Laurent Pinchart, Thomas Zimmermann, Kevin Hilman, Daniel Vetter, linux-amlogic, Sam Ravnborg, linux-arm-kernel It's right above the drm_dev_put(). This is made possible by a preceeding patch which added a drmm_ cleanup action to drm_mode_config_init(), hence all we need to do to ensure that drm_mode_config_cleanup() is run on final drm_device cleanup is check the new error code for _init(). Aside: This driver gets its devm_ stuff all wrong wrt drm_device and anything hanging off that. Not the only one unfortunately. v2: Explain why this cleanup is possible (Laurent). v3: Use drmm_mode_config_init() for more clarity (Sam, Thomas) Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> (v2) Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org --- drivers/gpu/drm/meson/meson_drv.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/meson/meson_drv.c b/drivers/gpu/drm/meson/meson_drv.c index b5f5eb7b4bb9..6f29fab79952 100644 --- a/drivers/gpu/drm/meson/meson_drv.c +++ b/drivers/gpu/drm/meson/meson_drv.c @@ -284,7 +284,9 @@ static int meson_drv_bind_master(struct device *dev, bool has_components) /* Remove early framebuffers (ie. simplefb) */ meson_remove_framebuffers(); - drm_mode_config_init(drm); + ret = drmm_mode_config_init(drm); + if (ret) + goto free_drm; drm->mode_config.max_width = 3840; drm->mode_config.max_height = 2160; drm->mode_config.funcs = &meson_mode_config_funcs; @@ -379,7 +381,6 @@ static void meson_drv_unbind(struct device *dev) drm_dev_unregister(drm); drm_irq_uninstall(drm); drm_kms_helper_poll_fini(drm); - drm_mode_config_cleanup(drm); drm_dev_put(drm); } -- 2.25.1 _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply [flat|nested] 4+ messages in thread
[parent not found: <20200302222631.3861340-1-daniel.vetter@ffwll.ch>]
* [PATCH 34/51] drm/meson: Drop explicit drm_mode_config_cleanup call [not found] <20200302222631.3861340-1-daniel.vetter@ffwll.ch> @ 2020-03-02 22:26 ` Daniel Vetter 0 siblings, 0 replies; 4+ messages in thread From: Daniel Vetter @ 2020-03-02 22:26 UTC (permalink / raw) To: DRI Development Cc: Neil Armstrong, Daniel Vetter, Intel Graphics Development, Laurent Pinchart, Thomas Zimmermann, Kevin Hilman, Daniel Vetter, linux-amlogic, Sam Ravnborg, linux-arm-kernel It's right above the drm_dev_put(). This is made possible by a preceeding patch which added a drmm_ cleanup action to drm_mode_config_init(), hence all we need to do to ensure that drm_mode_config_cleanup() is run on final drm_device cleanup is check the new error code for _init(). Aside: This driver gets its devm_ stuff all wrong wrt drm_device and anything hanging off that. Not the only one unfortunately. v2: Explain why this cleanup is possible (Laurent). v3: Use drmm_mode_config_init() for more clarity (Sam, Thomas) Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> (v2) Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org --- drivers/gpu/drm/meson/meson_drv.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/meson/meson_drv.c b/drivers/gpu/drm/meson/meson_drv.c index b5f5eb7b4bb9..6f29fab79952 100644 --- a/drivers/gpu/drm/meson/meson_drv.c +++ b/drivers/gpu/drm/meson/meson_drv.c @@ -284,7 +284,9 @@ static int meson_drv_bind_master(struct device *dev, bool has_components) /* Remove early framebuffers (ie. simplefb) */ meson_remove_framebuffers(); - drm_mode_config_init(drm); + ret = drmm_mode_config_init(drm); + if (ret) + goto free_drm; drm->mode_config.max_width = 3840; drm->mode_config.max_height = 2160; drm->mode_config.funcs = &meson_mode_config_funcs; @@ -379,7 +381,6 @@ static void meson_drv_unbind(struct device *dev) drm_dev_unregister(drm); drm_irq_uninstall(drm); drm_kms_helper_poll_fini(drm); - drm_mode_config_cleanup(drm); drm_dev_put(drm); } -- 2.24.1 _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply [flat|nested] 4+ messages in thread
[parent not found: <20200227181522.2711142-1-daniel.vetter@ffwll.ch>]
* [PATCH 34/51] drm/meson: Drop explicit drm_mode_config_cleanup call [not found] <20200227181522.2711142-1-daniel.vetter@ffwll.ch> @ 2020-02-27 18:15 ` Daniel Vetter 0 siblings, 0 replies; 4+ messages in thread From: Daniel Vetter @ 2020-02-27 18:15 UTC (permalink / raw) To: DRI Development Cc: Neil Armstrong, Daniel Vetter, Intel Graphics Development, m.felsch, Laurent Pinchart, Kevin Hilman, Daniel Vetter, linux-amlogic, linux-arm-kernel, l.stach It's right above the drm_dev_put(). This is made possible by a preceeding patch which added a drmm_ cleanup action to drm_mode_config_init(), hence all we need to do to ensure that drm_mode_config_cleanup() is run on final drm_device cleanup is check the new error code for _init(). Aside: This driver gets its devm_ stuff all wrong wrt drm_device and anything hanging off that. Not the only one unfortunately. v2: Explain why this cleanup is possible (Laurent). Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org --- drivers/gpu/drm/meson/meson_drv.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/meson/meson_drv.c b/drivers/gpu/drm/meson/meson_drv.c index b5f5eb7b4bb9..ae94d14ab7bc 100644 --- a/drivers/gpu/drm/meson/meson_drv.c +++ b/drivers/gpu/drm/meson/meson_drv.c @@ -284,7 +284,9 @@ static int meson_drv_bind_master(struct device *dev, bool has_components) /* Remove early framebuffers (ie. simplefb) */ meson_remove_framebuffers(); - drm_mode_config_init(drm); + ret = drm_mode_config_init(drm); + if (ret) + goto free_drm; drm->mode_config.max_width = 3840; drm->mode_config.max_height = 2160; drm->mode_config.funcs = &meson_mode_config_funcs; @@ -379,7 +381,6 @@ static void meson_drv_unbind(struct device *dev) drm_dev_unregister(drm); drm_irq_uninstall(drm); drm_kms_helper_poll_fini(drm); - drm_mode_config_cleanup(drm); drm_dev_put(drm); } -- 2.24.1 _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply [flat|nested] 4+ messages in thread
[parent not found: <20200221210319.2245170-1-daniel.vetter@ffwll.ch>]
* [PATCH 34/51] drm/meson: Drop explicit drm_mode_config_cleanup call [not found] <20200221210319.2245170-1-daniel.vetter@ffwll.ch> @ 2020-02-21 21:03 ` Daniel Vetter 0 siblings, 0 replies; 4+ messages in thread From: Daniel Vetter @ 2020-02-21 21:03 UTC (permalink / raw) To: DRI Development Cc: Neil Armstrong, Daniel Vetter, Intel Graphics Development, Laurent Pinchart, Kevin Hilman, Daniel Vetter, linux-amlogic, linux-arm-kernel It's right above the drm_dev_put(). This is made possible by a preceeding patch which added a drmm_ cleanup action to drm_mode_config_init(), hence all we need to do to ensure that drm_mode_config_cleanup() is run on final drm_device cleanup is check the new error code for _init(). Aside: This driver gets its devm_ stuff all wrong wrt drm_device and anything hanging off that. Not the only one unfortunately. v2: Explain why this cleanup is possible (Laurent). Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org --- drivers/gpu/drm/meson/meson_drv.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/meson/meson_drv.c b/drivers/gpu/drm/meson/meson_drv.c index b5f5eb7b4bb9..ae94d14ab7bc 100644 --- a/drivers/gpu/drm/meson/meson_drv.c +++ b/drivers/gpu/drm/meson/meson_drv.c @@ -284,7 +284,9 @@ static int meson_drv_bind_master(struct device *dev, bool has_components) /* Remove early framebuffers (ie. simplefb) */ meson_remove_framebuffers(); - drm_mode_config_init(drm); + ret = drm_mode_config_init(drm); + if (ret) + goto free_drm; drm->mode_config.max_width = 3840; drm->mode_config.max_height = 2160; drm->mode_config.funcs = &meson_mode_config_funcs; @@ -379,7 +381,6 @@ static void meson_drv_unbind(struct device *dev) drm_dev_unregister(drm); drm_irq_uninstall(drm); drm_kms_helper_poll_fini(drm); - drm_mode_config_cleanup(drm); drm_dev_put(drm); } -- 2.24.1 _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2020-03-23 14:51 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <20200323144950.3018436-1-daniel.vetter@ffwll.ch>
2020-03-23 14:49 ` [PATCH 34/51] drm/meson: Drop explicit drm_mode_config_cleanup call Daniel Vetter
[not found] <20200302222631.3861340-1-daniel.vetter@ffwll.ch>
2020-03-02 22:26 ` Daniel Vetter
[not found] <20200227181522.2711142-1-daniel.vetter@ffwll.ch>
2020-02-27 18:15 ` Daniel Vetter
[not found] <20200221210319.2245170-1-daniel.vetter@ffwll.ch>
2020-02-21 21:03 ` Daniel Vetter
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®