[PATCH 0/4] clk: meson8b: updates for video clocks / resets

[Martin Blumenstingl <martin.blumenstingl@googlemail.com>]

This is the first batch of fixes and updates for the Meson8/8b/8m2
clock controller driver.

The first patch fixes the video clock hierarchy. Special thanks to
Neil for providing a lot of details about the video clock tree!

The second and third came up while testing video output on my EC-100
(Endless Mini). This board is special because u-boot does not enable
the video outputs like most other u-boot versions do. However, this
is very useful for development because it shows (the hard way ;))
where the existing code is buggy.

The last patch is a small improvement for the VPU clock so we
utilize the glitch-free mux (on SoCs which support it) and avoid
problems by changing the "live" clock tree at runtime (with the mali
clock this resulted in system hangs/freezes).

In my opinion all of these patches - including the fixes - can go to
"next" because the relevant clock trees are still read-only.


Martin Blumenstingl (4):
  clk: meson: meson8b: Fix the first parent of vid_pll_in_sel
  clk: meson: meson8b: Fix the polarity of the RESET_N lines
  clk: meson: meson8b: Fix the vclk_div{1,2,4,6,12}_en gate bits
  clk: meson: meson8b: Make the CCF use the glitch-free VPU mux

 drivers/clk/meson/meson8b.c | 107 +++++++++++++++++++++++++-----------
 1 file changed, 75 insertions(+), 32 deletions(-)

-- 
2.26.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic