[PATCH AUTOSEL 5.8 49/72] arm64: dts: meson: misc fixups for w400 dtsi

[PATCH AUTOSEL 5.8 49/72] arm64: dts: meson: misc fixups for w400 dtsi

[Sasha Levin]

From: Christian Hewitt <christianshewitt@gmail.com>

[ Upstream commit 2fa17dd09533d5d83201be3229a28c1010a8ea3e ]

Current devices using the W400 dtsi show mmc tuning errors:

[12483.917391] mmc0: tuning execution failed: -5
[30535.551221] mmc0: tuning execution failed: -5
[35359.953671] mmc0: tuning execution failed: -5
[35561.875332] mmc0: tuning execution failed: -5
[61733.348709] mmc0: tuning execution failed: -5

Removing "sd-uhs-sdr50" from the SDIO node prevents this. We also add
keep-power-in-suspend to the SDIO node and fix an indentation.

Fixes: 3cb74db9b256 ("arm64: dts: meson: convert ugoos-am6 to common w400 dtsi")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20200721013952.11635-1-christianshewitt@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
index 98b70d216a6f3..2802ddbb83ac7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
@@ -336,9 +336,11 @@ &sd_emmc_a {
 
 	bus-width = <4>;
 	cap-sd-highspeed;
-	sd-uhs-sdr50;
 	max-frequency = <100000000>;
 
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
 	non-removable;
 	disable-wp;
 
@@ -398,7 +400,7 @@ bluetooth {
 		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
 		max-speed = <2000000>;
 		clocks = <&wifi32k>;
-	clock-names = "lpo";
+		clock-names = "lpo";
 	};
 };
 
-- 
2.25.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH AUTOSEL 5.8 50/72] arm64: dts: meson: fix mmc0 tuning error on Khadas VIM3

[Sasha Levin]

From: Christian Hewitt <christianshewitt@gmail.com>

[ Upstream commit f1bb924e8f5b50752a80fa5b48c43003680a7b64 ]

Similar to other G12B devices using the W400 dtsi, I see reports of mmc0
tuning errors on VIM3 after a few hours uptime:

[12483.917391] mmc0: tuning execution failed: -5
[30535.551221] mmc0: tuning execution failed: -5
[35359.953671] mmc0: tuning execution failed: -5
[35561.875332] mmc0: tuning execution failed: -5
[61733.348709] mmc0: tuning execution failed: -5

I do not see the same on VIM3L, so remove sd-uhs-sdr50 from the common dtsi
to silence the error, then (re)add it to the VIM3L dts.

Fixes: 4f26cc1c96c9 ("arm64: dts: khadas-vim3: move common nodes into meson-khadas-vim3.dtsi")
Fixes: 700ab8d83927 ("arm64: dts: khadas-vim3: add support for the SM1 based VIM3L")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20200721015950.11816-1-christianshewitt@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi     | 1 -
 arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts | 4 ++++
 2 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
index 1ef1e3672b967..ff5ba85b7562e 100644
--- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
@@ -270,7 +270,6 @@ &sd_emmc_a {
 
 	bus-width = <4>;
 	cap-sd-highspeed;
-	sd-uhs-sdr50;
 	max-frequency = <100000000>;
 
 	non-removable;
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
index dbbf29a0dbf6d..026b21708b078 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
@@ -88,6 +88,10 @@ &pcie {
 	status = "okay";
 };
 
+&sd_emmc_a {
+	sd-uhs-sdr50;
+};
+
 &usb {
 	phys = <&usb2_phy0>, <&usb2_phy1>;
 	phy-names = "usb2-phy0", "usb2-phy1";
-- 
2.25.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic