[PATCH 0/3] arm64: dts: meson: gxbb-kii-pro: device-tree updates

[PATCH 0/3] arm64: dts: meson: gxbb-kii-pro: device-tree updates

[Christian Hewitt]

First we sort nodes in the current dts and remove some blank lines. Then we
add the remaining bits needed for Bluetooth to work. And finally we add the
AIU audio card to have HDMI and S/PDIF audio output.

Christian Hewitt (3):
  arm64: dts: meson: gxbb-kii-pro: sort and tidy the dts
  arm64: dts: meson: gxbb-kii-pro: complete the bluetooth node
  arm64: dts: meson: gxbb-kii-pro: add initial audio support

 .../boot/dts/amlogic/meson-gxbb-kii-pro.dts   | 84 ++++++++++++++++---
 1 file changed, 73 insertions(+), 11 deletions(-)

-- 
2.34.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 1/3] arm64: dts: meson: gxbb-kii-pro: sort and tidy the dts

[Christian Hewitt]

Alpha-sort the nodes, move the default line in the LED node to where it's
normally found, and remove excess spacing. No functional changes.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Tested-by: Ferass El Hafidi <vitali64pmemail@protonmail.com>
---
 .../boot/dts/amlogic/meson-gxbb-kii-pro.dts   | 32 ++++++++-----------
 1 file changed, 14 insertions(+), 18 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
index 6d8cc00fedc7..9bfdb54d912a 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
@@ -6,21 +6,22 @@
 /dts-v1/;
 
 #include "meson-gxbb-p20x.dtsi"
-
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
+
 / {
 	compatible = "videostrong,kii-pro", "amlogic,meson-gxbb";
 	model = "Videostrong KII Pro";
 
 	leds {
 		compatible = "gpio-leds";
+
 		status {
 			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
-			default-state = "off";
 			color = <LED_COLOR_ID_RED>;
 			function = LED_FUNCTION_STATUS;
+			default-state = "off";
 		};
 	};
 
@@ -34,24 +35,8 @@ button-reset {
 			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
 		};
 	};
-
-};
-
-
-
-&uart_A {
-	status = "okay";
-	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
-	pinctrl-names = "default";
-	uart-has-rtscts;
-
-	bluetooth {
-		compatible = "brcm,bcm4335a0";
-	};
 };
 
-
-
 &ethmac {
 	status = "okay";
 	pinctrl-0 = <&eth_rmii_pins>;
@@ -78,3 +63,14 @@ eth_phy0: ethernet-phy@0 {
 &ir {
 	linux,rc-map-name = "rc-videostrong-kii-pro";
 };
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm4335a0";
+	};
+};
-- 
2.34.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 1/3] arm64: dts: meson: gxbb-kii-pro: sort and tidy the dts

[Neil Armstrong]

On 10/02/2023 13:28, Christian Hewitt wrote:
> Alpha-sort the nodes, move the default line in the LED node to where it's
> normally found, and remove excess spacing. No functional changes.
> 
> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
> Tested-by: Ferass El Hafidi <vitali64pmemail@protonmail.com>
> ---
>   .../boot/dts/amlogic/meson-gxbb-kii-pro.dts   | 32 ++++++++-----------
>   1 file changed, 14 insertions(+), 18 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
> index 6d8cc00fedc7..9bfdb54d912a 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
> @@ -6,21 +6,22 @@
>   /dts-v1/;
>   
>   #include "meson-gxbb-p20x.dtsi"
> -
>   #include <dt-bindings/gpio/gpio.h>
>   #include <dt-bindings/input/input.h>
>   #include <dt-bindings/leds/common.h>
> +
>   / {
>   	compatible = "videostrong,kii-pro", "amlogic,meson-gxbb";
>   	model = "Videostrong KII Pro";
>   
>   	leds {
>   		compatible = "gpio-leds";
> +
>   		status {
>   			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
> -			default-state = "off";
>   			color = <LED_COLOR_ID_RED>;
>   			function = LED_FUNCTION_STATUS;
> +			default-state = "off";
>   		};
>   	};
>   
> @@ -34,24 +35,8 @@ button-reset {
>   			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
>   		};
>   	};
> -
> -};
> -
> -
> -
> -&uart_A {
> -	status = "okay";
> -	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
> -	pinctrl-names = "default";
> -	uart-has-rtscts;
> -
> -	bluetooth {
> -		compatible = "brcm,bcm4335a0";
> -	};
>   };
>   
> -
> -
>   &ethmac {
>   	status = "okay";
>   	pinctrl-0 = <&eth_rmii_pins>;
> @@ -78,3 +63,14 @@ eth_phy0: ethernet-phy@0 {
>   &ir {
>   	linux,rc-map-name = "rc-videostrong-kii-pro";
>   };
> +
> +&uart_A {
> +	status = "okay";
> +	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
> +	pinctrl-names = "default";
> +	uart-has-rtscts;
> +
> +	bluetooth {
> +		compatible = "brcm,bcm4335a0";
> +	};
> +};

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 2/3] arm64: dts: meson: gxbb-kii-pro: complete the bluetooth node

[Christian Hewitt]

Add missing content to the bluetooth node to align it with the content
used in (all) other GXBB dts files.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Tested-by: Ferass El Hafidi <vitali64pmemail@protonmail.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
index 9bfdb54d912a..435ae2aa404e 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
@@ -72,5 +72,10 @@ &uart_A {
 
 	bluetooth {
 		compatible = "brcm,bcm4335a0";
+		shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio GPIOX_21 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
 	};
 };
-- 
2.34.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 2/3] arm64: dts: meson: gxbb-kii-pro: complete the bluetooth node

[Neil Armstrong]

On 10/02/2023 13:28, Christian Hewitt wrote:
> Add missing content to the bluetooth node to align it with the content
> used in (all) other GXBB dts files.
> 
> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
> Tested-by: Ferass El Hafidi <vitali64pmemail@protonmail.com>
> ---
>   arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts | 5 +++++
>   1 file changed, 5 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
> index 9bfdb54d912a..435ae2aa404e 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
> @@ -72,5 +72,10 @@ &uart_A {
>   
>   	bluetooth {
>   		compatible = "brcm,bcm4335a0";
> +		shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>;
> +		host-wakeup-gpios = <&gpio GPIOX_21 GPIO_ACTIVE_HIGH>;
> +		max-speed = <2000000>;
> +		clocks = <&wifi32k>;
> +		clock-names = "lpo";
>   	};
>   };

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 3/3] arm64: dts: meson: gxbb-kii-pro: add initial audio support

[Christian Hewitt]

Add initial support for HDMI and S/PDIF audio output.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Tested-by: Ferass El Hafidi <vitali64pmemail@protonmail.com>
---
 .../boot/dts/amlogic/meson-gxbb-kii-pro.dts   | 61 +++++++++++++++++++
 1 file changed, 61 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
index 435ae2aa404e..b6ee76011d82 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
@@ -9,11 +9,19 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/meson-aiu.h>
 
 / {
 	compatible = "videostrong,kii-pro", "amlogic,meson-gxbb";
 	model = "Videostrong KII Pro";
 
+	spdif_dit: audio-codec-0 {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+		status = "okay";
+		sound-name-prefix = "DIT";
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -35,6 +43,59 @@ button-reset {
 			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
 		};
 	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "KII-PRO";
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+		status = "okay";
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+		};
+
+		dai-link-3 {
+			sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>;
+
+			codec-0 {
+				sound-dai = <&spdif_dit>;
+			};
+		};
+
+		dai-link-4 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&aiu {
+	status = "okay";
+	pinctrl-0 = <&spdif_out_y_pins>;
+	pinctrl-names = "default";
 };
 
 &ethmac {
-- 
2.34.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 3/3] arm64: dts: meson: gxbb-kii-pro: add initial audio support

[Neil Armstrong]

On 10/02/2023 13:28, Christian Hewitt wrote:
> Add initial support for HDMI and S/PDIF audio output.
> 
> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
> Tested-by: Ferass El Hafidi <vitali64pmemail@protonmail.com>
> ---
>   .../boot/dts/amlogic/meson-gxbb-kii-pro.dts   | 61 +++++++++++++++++++
>   1 file changed, 61 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
> index 435ae2aa404e..b6ee76011d82 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
> @@ -9,11 +9,19 @@
>   #include <dt-bindings/gpio/gpio.h>
>   #include <dt-bindings/input/input.h>
>   #include <dt-bindings/leds/common.h>
> +#include <dt-bindings/sound/meson-aiu.h>
>   
>   / {
>   	compatible = "videostrong,kii-pro", "amlogic,meson-gxbb";
>   	model = "Videostrong KII Pro";
>   
> +	spdif_dit: audio-codec-0 {
> +		#sound-dai-cells = <0>;
> +		compatible = "linux,spdif-dit";
> +		status = "okay";
> +		sound-name-prefix = "DIT";
> +	};
> +
>   	leds {
>   		compatible = "gpio-leds";
>   
> @@ -35,6 +43,59 @@ button-reset {
>   			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
>   		};
>   	};
> +
> +	sound {
> +		compatible = "amlogic,gx-sound-card";
> +		model = "KII-PRO";
> +		assigned-clocks = <&clkc CLKID_MPLL0>,
> +				  <&clkc CLKID_MPLL1>,
> +				  <&clkc CLKID_MPLL2>;
> +		assigned-clock-parents = <0>, <0>, <0>;
> +		assigned-clock-rates = <294912000>,
> +				       <270950400>,
> +				       <393216000>;
> +		status = "okay";

Drop this okay

> +
> +		dai-link-0 {
> +			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
> +		};
> +
> +		dai-link-1 {
> +			sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>;
> +		};
> +
> +		dai-link-2 {
> +			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
> +			dai-format = "i2s";
> +			mclk-fs = <256>;
> +
> +			codec-0 {
> +				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
> +			};
> +		};
> +
> +		dai-link-3 {
> +			sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>;
> +
> +			codec-0 {
> +				sound-dai = <&spdif_dit>;
> +			};
> +		};
> +
> +		dai-link-4 {
> +			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
> +
> +			codec-0 {
> +				sound-dai = <&hdmi_tx>;
> +			};
> +		};
> +	};
> +};
> +
> +&aiu {
> +	status = "okay";
> +	pinctrl-0 = <&spdif_out_y_pins>;
> +	pinctrl-names = "default";
>   };
>   
>   &ethmac {


With that change:

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic