[PATCH 0/3] Add additional YUV420 bus format check for dw-meson's bridge enable

From: "Adrián Larumbe" <adrian.larumbe@collabora.com>
To: narmstrong@baylibre.com, khilman@baylibre.com,
	linux-amlogic@lists.infradead.org,
	dri-devel@lists.freedesktop.org, rfoss@kernel.org,
	andrzej.hajda@intel.com
Cc: adrian.larumbe@collabora.com, kernel@collabora.com
Subject: [PATCH 0/3] Add additional YUV420 bus format check for dw-meson's bridge enable
Date: Sun, 28 May 2023 14:59:58 +0100	[thread overview]
Message-ID: <20230528140001.1057084-1-adrian.larumbe@collabora.com> (raw)

This is a belated follow-up on
https://lore.kernel.org/dri-devel/20220515204412.2733803-1-adrian.larumbe@collabora.com/

Commit e67f6037ae1be34b2b68 ("drm/meson: split out encoder from meson_dw_hdmi")
broke 4K display modes for me, and I discovered it was because the right pixel
clock wasn't being chosen in dw_hdmi_phy_init. I misinterpreted the reason as a
problem in figuring out whether we want to enforce YUV420 mode, but it turned
out to be a mismatch between what dw-meson code is doing and the way the bus
format is being picked by the dw-hdmi bus output format drm helper.

I fixed it by bringing back dw-hdmi bus format check in dw-meson.

The second patch makes sure YUV420 bus format is the only one being returned by
dw-hdmi's output format bridge function when that's the only drm mode allowed.

Adrián Larumbe (3):
  drm/meson: dw-hdmi: change YUV420 selection logic at clock setup
  dw-hdmi: truly enforce 420-only formats when drm mode demands it
  dw-hdmi: remove dead code and fix indentation

 drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 35 +++++++++--------------
 drivers/gpu/drm/meson/meson_dw_hdmi.c     |  4 +--
 include/drm/bridge/dw_hdmi.h              |  2 ++
 3 files changed, 18 insertions(+), 23 deletions(-)

-- 
2.40.0

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic