[PATCH v3 0/3] media: rc: meson-ir: support MMIO regmaps to access registers

[PATCH v3 0/3] media: rc: meson-ir: support MMIO regmaps to access registers

[zelong dong]

From: Zelong Dong <zelong.dong@amlogic.com>

This patchset add MMIO regmaps to access register in Meson IR driver.
For defining clearly, sort/rename IR Controller register macros.

Changes since v1:
- move the cleanup/rename to a separate patch.
- use devm_platform_ioremap_resource() instead of platform_get_resource()
  and devm_ioremap_resource().

Changes since v2:
- remove unused blank lines
- update media/rc/Kconfig with REGMAP_MMIO
- all of patchs rebase on v6.4-rc4

---
v1: https://lore.kernel.org/r/20230511034333.26800-1-zelong.dong@amlogic.com
v2: https://lore.kernel.org/all/20230517115635.31565-1-zelong.dong@amlogic.com/

Zelong Dong (3):
  media: rc: meson-ir: sort Meson IR Controller register macros
  media: rc: meson-ir: rename Meson IR Controller register macros
  media: rc: meson-ir: support MMIO regmaps to access registers

 drivers/media/rc/Kconfig    |   1 +
 drivers/media/rc/meson-ir.c | 120 ++++++++++++++++++------------------
 2 files changed, 60 insertions(+), 61 deletions(-)

-- 
2.35.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH v3 1/3] media: rc: meson-ir: sort Meson IR Controller register macros

[zelong dong]

From: Zelong Dong <zelong.dong@amlogic.com>

There are more registers to come in the next Meson IR Controller.
For defining clearly, sort register macros and let address and bit
macros as a set.

Signed-off-by: Zelong Dong <zelong.dong@amlogic.com>
---
 drivers/media/rc/meson-ir.c | 29 ++++++++++-------------------
 1 file changed, 10 insertions(+), 19 deletions(-)

diff --git a/drivers/media/rc/meson-ir.c b/drivers/media/rc/meson-ir.c
index 49aa309d1a8c..6d77a8c33dc1 100644
--- a/drivers/media/rc/meson-ir.c
+++ b/drivers/media/rc/meson-ir.c
@@ -19,44 +19,35 @@
 
 #define DRIVER_NAME		"meson-ir"
 
-/* valid on all Meson platforms */
 #define IR_DEC_LDR_ACTIVE	0x00
 #define IR_DEC_LDR_IDLE		0x04
 #define IR_DEC_LDR_REPEAT	0x08
 #define IR_DEC_BIT_0		0x0c
 #define IR_DEC_REG0		0x10
+#define REG0_RATE_MASK		GENMASK(11, 0)
 #define IR_DEC_FRAME		0x14
 #define IR_DEC_STATUS		0x18
+#define STATUS_IR_DEC_IN	BIT(8)
 #define IR_DEC_REG1		0x1c
-/* only available on Meson 8b and newer */
-#define IR_DEC_REG2		0x20
-
-#define REG0_RATE_MASK		GENMASK(11, 0)
-
-#define DECODE_MODE_NEC		0x0
-#define DECODE_MODE_RAW		0x2
-
-/* Meson 6b uses REG1 to configure the mode */
+#define REG1_TIME_IV_MASK	GENMASK(28, 16)
+#define REG1_ENABLE		BIT(15)
 #define REG1_MODE_MASK		GENMASK(8, 7)
 #define REG1_MODE_SHIFT		7
-
-/* Meson 8b / GXBB use REG2 to configure the mode */
+#define REG1_IRQSEL_MASK	GENMASK(3, 2)
+#define REG1_RESET		BIT(0)
+/* The following regs are only available on Meson 8b and newer */
+#define IR_DEC_REG2		0x20
 #define REG2_MODE_MASK		GENMASK(3, 0)
 #define REG2_MODE_SHIFT		0
 
-#define REG1_TIME_IV_MASK	GENMASK(28, 16)
+#define DECODE_MODE_NEC		0x0
+#define DECODE_MODE_RAW		0x2
 
-#define REG1_IRQSEL_MASK	GENMASK(3, 2)
 #define REG1_IRQSEL_NEC_MODE	0
 #define REG1_IRQSEL_RISE_FALL	1
 #define REG1_IRQSEL_FALL	2
 #define REG1_IRQSEL_RISE	3
 
-#define REG1_RESET		BIT(0)
-#define REG1_ENABLE		BIT(15)
-
-#define STATUS_IR_DEC_IN	BIT(8)
-
 #define MESON_TRATE		10	/* us */
 
 struct meson_ir {
-- 
2.35.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH v3 2/3] media: rc: meson-ir: rename Meson IR Controller register macros

[zelong dong]

From: Zelong Dong <zelong.dong@amlogic.com>

There are more registers to come in the next Meson IR Controller.
For defining clearly, rename register macros.

Signed-off-by: Zelong Dong <zelong.dong@amlogic.com>
---
 drivers/media/rc/meson-ir.c | 77 +++++++++++++++++++------------------
 1 file changed, 40 insertions(+), 37 deletions(-)

diff --git a/drivers/media/rc/meson-ir.c b/drivers/media/rc/meson-ir.c
index 6d77a8c33dc1..a0ccde02bc08 100644
--- a/drivers/media/rc/meson-ir.c
+++ b/drivers/media/rc/meson-ir.c
@@ -24,31 +24,30 @@
 #define IR_DEC_LDR_REPEAT	0x08
 #define IR_DEC_BIT_0		0x0c
 #define IR_DEC_REG0		0x10
-#define REG0_RATE_MASK		GENMASK(11, 0)
+#define IR_DEC_REG0_BASE_TIME	GENMASK(11, 0)
 #define IR_DEC_FRAME		0x14
 #define IR_DEC_STATUS		0x18
-#define STATUS_IR_DEC_IN	BIT(8)
+#define IR_DEC_STATUS_PULSE	BIT(8)
 #define IR_DEC_REG1		0x1c
-#define REG1_TIME_IV_MASK	GENMASK(28, 16)
-#define REG1_ENABLE		BIT(15)
-#define REG1_MODE_MASK		GENMASK(8, 7)
-#define REG1_MODE_SHIFT		7
-#define REG1_IRQSEL_MASK	GENMASK(3, 2)
-#define REG1_RESET		BIT(0)
+#define IR_DEC_REG1_TIME_IV	GENMASK(28, 16)
+#define IR_DEC_REG1_ENABLE	BIT(15)
+#define IR_DEC_REG1_MODE	GENMASK(8, 7)
+#define IR_DEC_REG1_IRQSEL	GENMASK(3, 2)
+#define IR_DEC_REG1_RESET	BIT(0)
 /* The following regs are only available on Meson 8b and newer */
 #define IR_DEC_REG2		0x20
-#define REG2_MODE_MASK		GENMASK(3, 0)
-#define REG2_MODE_SHIFT		0
+#define IR_DEC_REG2_MODE	GENMASK(3, 0)
 
-#define DECODE_MODE_NEC		0x0
-#define DECODE_MODE_RAW		0x2
+#define DEC_MODE_NEC		0x0
+#define DEC_MODE_RAW		0x2
 
-#define REG1_IRQSEL_NEC_MODE	0
-#define REG1_IRQSEL_RISE_FALL	1
-#define REG1_IRQSEL_FALL	2
-#define REG1_IRQSEL_RISE	3
+#define IRQSEL_NEC_MODE		0
+#define IRQSEL_RISE_FALL	1
+#define IRQSEL_FALL		2
+#define IRQSEL_RISE		3
 
-#define MESON_TRATE		10	/* us */
+#define MESON_RAW_TRATE		10	/* us */
+#define MESON_HW_TRATE		20	/* us */
 
 struct meson_ir {
 	void __iomem	*reg;
@@ -76,11 +75,11 @@ static irqreturn_t meson_ir_irq(int irqno, void *dev_id)
 	spin_lock(&ir->lock);
 
 	duration = readl_relaxed(ir->reg + IR_DEC_REG1);
-	duration = FIELD_GET(REG1_TIME_IV_MASK, duration);
-	rawir.duration = duration * MESON_TRATE;
+	duration = FIELD_GET(IR_DEC_REG1_TIME_IV, duration);
+	rawir.duration = duration * MESON_RAW_TRATE;
 
 	status = readl_relaxed(ir->reg + IR_DEC_STATUS);
-	rawir.pulse = !!(status & STATUS_IR_DEC_IN);
+	rawir.pulse = !!(status & IR_DEC_STATUS_PULSE);
 
 	ir_raw_event_store_with_timeout(ir->rc, &rawir);
 
@@ -122,7 +121,7 @@ static int meson_ir_probe(struct platform_device *pdev)
 	map_name = of_get_property(node, "linux,rc-map-name", NULL);
 	ir->rc->map_name = map_name ? map_name : RC_MAP_EMPTY;
 	ir->rc->allowed_protocols = RC_PROTO_BIT_ALL_IR_DECODER;
-	ir->rc->rx_resolution = MESON_TRATE;
+	ir->rc->rx_resolution = MESON_RAW_TRATE;
 	ir->rc->min_timeout = 1;
 	ir->rc->timeout = IR_DEFAULT_TIMEOUT;
 	ir->rc->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
@@ -144,24 +143,27 @@ static int meson_ir_probe(struct platform_device *pdev)
 	}
 
 	/* Reset the decoder */
-	meson_ir_set_mask(ir, IR_DEC_REG1, REG1_RESET, REG1_RESET);
-	meson_ir_set_mask(ir, IR_DEC_REG1, REG1_RESET, 0);
+	meson_ir_set_mask(ir, IR_DEC_REG1, IR_DEC_REG1_RESET,
+			  IR_DEC_REG1_RESET);
+	meson_ir_set_mask(ir, IR_DEC_REG1, IR_DEC_REG1_RESET, 0);
 
 	/* Set general operation mode (= raw/software decoding) */
 	if (of_device_is_compatible(node, "amlogic,meson6-ir"))
-		meson_ir_set_mask(ir, IR_DEC_REG1, REG1_MODE_MASK,
-				  FIELD_PREP(REG1_MODE_MASK, DECODE_MODE_RAW));
+		meson_ir_set_mask(ir, IR_DEC_REG1, IR_DEC_REG1_MODE,
+				  FIELD_PREP(IR_DEC_REG1_MODE, DEC_MODE_RAW));
 	else
-		meson_ir_set_mask(ir, IR_DEC_REG2, REG2_MODE_MASK,
-				  FIELD_PREP(REG2_MODE_MASK, DECODE_MODE_RAW));
+		meson_ir_set_mask(ir, IR_DEC_REG2, IR_DEC_REG2_MODE,
+				  FIELD_PREP(IR_DEC_REG2_MODE, DEC_MODE_RAW));
 
 	/* Set rate */
-	meson_ir_set_mask(ir, IR_DEC_REG0, REG0_RATE_MASK, MESON_TRATE - 1);
+	meson_ir_set_mask(ir, IR_DEC_REG0, IR_DEC_REG0_BASE_TIME,
+			  MESON_RAW_TRATE - 1);
 	/* IRQ on rising and falling edges */
-	meson_ir_set_mask(ir, IR_DEC_REG1, REG1_IRQSEL_MASK,
-			  FIELD_PREP(REG1_IRQSEL_MASK, REG1_IRQSEL_RISE_FALL));
+	meson_ir_set_mask(ir, IR_DEC_REG1, IR_DEC_REG1_IRQSEL,
+			  FIELD_PREP(IR_DEC_REG1_IRQSEL, IRQSEL_RISE_FALL));
 	/* Enable the decoder */
-	meson_ir_set_mask(ir, IR_DEC_REG1, REG1_ENABLE, REG1_ENABLE);
+	meson_ir_set_mask(ir, IR_DEC_REG1, IR_DEC_REG1_ENABLE,
+			  IR_DEC_REG1_ENABLE);
 
 	dev_info(dev, "receiver initialized\n");
 
@@ -175,7 +177,7 @@ static void meson_ir_remove(struct platform_device *pdev)
 
 	/* Disable the decoder */
 	spin_lock_irqsave(&ir->lock, flags);
-	meson_ir_set_mask(ir, IR_DEC_REG1, REG1_ENABLE, 0);
+	meson_ir_set_mask(ir, IR_DEC_REG1, IR_DEC_REG1_ENABLE, 0);
 	spin_unlock_irqrestore(&ir->lock, flags);
 }
 
@@ -193,14 +195,15 @@ static void meson_ir_shutdown(struct platform_device *pdev)
 	 * bootloader a chance to power the system back on
 	 */
 	if (of_device_is_compatible(node, "amlogic,meson6-ir"))
-		meson_ir_set_mask(ir, IR_DEC_REG1, REG1_MODE_MASK,
-				  DECODE_MODE_NEC << REG1_MODE_SHIFT);
+		meson_ir_set_mask(ir, IR_DEC_REG1, IR_DEC_REG1_MODE,
+				  FIELD_PREP(IR_DEC_REG1_MODE, DEC_MODE_NEC));
 	else
-		meson_ir_set_mask(ir, IR_DEC_REG2, REG2_MODE_MASK,
-				  DECODE_MODE_NEC << REG2_MODE_SHIFT);
+		meson_ir_set_mask(ir, IR_DEC_REG2, IR_DEC_REG2_MODE,
+				  FIELD_PREP(IR_DEC_REG2_MODE, DEC_MODE_NEC));
 
 	/* Set rate to default value */
-	meson_ir_set_mask(ir, IR_DEC_REG0, REG0_RATE_MASK, 0x13);
+	meson_ir_set_mask(ir, IR_DEC_REG0, IR_DEC_REG0_BASE_TIME,
+			  MESON_HW_TRATE - 1);
 
 	spin_unlock_irqrestore(&ir->lock, flags);
 }
-- 
2.35.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH v3 3/3] media: rc: meson-ir: support MMIO regmaps to access registers

[zelong dong]

From: Zelong Dong <zelong.dong@amlogic.com>

Supports MMIO regmaps to access controller registers in Meson IR driver.

Signed-off-by: Zelong Dong <zelong.dong@amlogic.com>
---
 drivers/media/rc/Kconfig    |  1 +
 drivers/media/rc/meson-ir.c | 72 +++++++++++++++++++------------------
 2 files changed, 39 insertions(+), 34 deletions(-)

diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
index ac4172feb6f9..24437ed64a27 100644
--- a/drivers/media/rc/Kconfig
+++ b/drivers/media/rc/Kconfig
@@ -271,6 +271,7 @@ config IR_MCEUSB
 config IR_MESON
 	tristate "Amlogic Meson IR remote receiver"
 	depends on ARCH_MESON || COMPILE_TEST
+	select REGMAP_MMIO
 	help
 	   Say Y if you want to use the IR remote receiver available
 	   on Amlogic Meson SoCs.
diff --git a/drivers/media/rc/meson-ir.c b/drivers/media/rc/meson-ir.c
index a0ccde02bc08..d22d2578ec39 100644
--- a/drivers/media/rc/meson-ir.c
+++ b/drivers/media/rc/meson-ir.c
@@ -14,6 +14,7 @@
 #include <linux/platform_device.h>
 #include <linux/spinlock.h>
 #include <linux/bitfield.h>
+#include <linux/regmap.h>
 
 #include <media/rc-core.h>
 
@@ -50,21 +51,16 @@
 #define MESON_HW_TRATE		20	/* us */
 
 struct meson_ir {
-	void __iomem	*reg;
+	struct regmap	*reg;
 	struct rc_dev	*rc;
 	spinlock_t	lock;
 };
 
-static void meson_ir_set_mask(struct meson_ir *ir, unsigned int reg,
-			      u32 mask, u32 value)
-{
-	u32 data;
-
-	data = readl(ir->reg + reg);
-	data &= ~mask;
-	data |= (value & mask);
-	writel(data, ir->reg + reg);
-}
+static struct regmap_config meson_ir_regmap_config = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+};
 
 static irqreturn_t meson_ir_irq(int irqno, void *dev_id)
 {
@@ -74,11 +70,11 @@ static irqreturn_t meson_ir_irq(int irqno, void *dev_id)
 
 	spin_lock(&ir->lock);
 
-	duration = readl_relaxed(ir->reg + IR_DEC_REG1);
+	regmap_read(ir->reg, IR_DEC_REG1, &duration);
 	duration = FIELD_GET(IR_DEC_REG1_TIME_IV, duration);
 	rawir.duration = duration * MESON_RAW_TRATE;
 
-	status = readl_relaxed(ir->reg + IR_DEC_STATUS);
+	regmap_read(ir->reg, IR_DEC_STATUS, &status);
 	rawir.pulse = !!(status & IR_DEC_STATUS_PULSE);
 
 	ir_raw_event_store_with_timeout(ir->rc, &rawir);
@@ -92,6 +88,7 @@ static int meson_ir_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct device_node *node = dev->of_node;
+	void __iomem *res_start;
 	const char *map_name;
 	struct meson_ir *ir;
 	int irq, ret;
@@ -100,7 +97,12 @@ static int meson_ir_probe(struct platform_device *pdev)
 	if (!ir)
 		return -ENOMEM;
 
-	ir->reg = devm_platform_ioremap_resource(pdev, 0);
+	res_start = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(res_start))
+		return PTR_ERR(res_start);
+
+	ir->reg = devm_regmap_init_mmio(&pdev->dev, res_start,
+					&meson_ir_regmap_config);
 	if (IS_ERR(ir->reg))
 		return PTR_ERR(ir->reg);
 
@@ -143,27 +145,28 @@ static int meson_ir_probe(struct platform_device *pdev)
 	}
 
 	/* Reset the decoder */
-	meson_ir_set_mask(ir, IR_DEC_REG1, IR_DEC_REG1_RESET,
-			  IR_DEC_REG1_RESET);
-	meson_ir_set_mask(ir, IR_DEC_REG1, IR_DEC_REG1_RESET, 0);
+	regmap_update_bits(ir->reg, IR_DEC_REG1, IR_DEC_REG1_RESET,
+			   IR_DEC_REG1_RESET);
+	regmap_update_bits(ir->reg, IR_DEC_REG1, IR_DEC_REG1_RESET, 0);
 
 	/* Set general operation mode (= raw/software decoding) */
 	if (of_device_is_compatible(node, "amlogic,meson6-ir"))
-		meson_ir_set_mask(ir, IR_DEC_REG1, IR_DEC_REG1_MODE,
-				  FIELD_PREP(IR_DEC_REG1_MODE, DEC_MODE_RAW));
+		regmap_update_bits(ir->reg, IR_DEC_REG1, IR_DEC_REG1_MODE,
+				   FIELD_PREP(IR_DEC_REG1_MODE, DEC_MODE_RAW));
 	else
-		meson_ir_set_mask(ir, IR_DEC_REG2, IR_DEC_REG2_MODE,
-				  FIELD_PREP(IR_DEC_REG2_MODE, DEC_MODE_RAW));
+		regmap_update_bits(ir->reg, IR_DEC_REG2, IR_DEC_REG2_MODE,
+				   FIELD_PREP(IR_DEC_REG2_MODE, DEC_MODE_RAW));
 
 	/* Set rate */
-	meson_ir_set_mask(ir, IR_DEC_REG0, IR_DEC_REG0_BASE_TIME,
-			  MESON_RAW_TRATE - 1);
+	regmap_update_bits(ir->reg, IR_DEC_REG0, IR_DEC_REG0_BASE_TIME,
+			   FIELD_PREP(IR_DEC_REG0_BASE_TIME,
+				      MESON_RAW_TRATE - 1));
 	/* IRQ on rising and falling edges */
-	meson_ir_set_mask(ir, IR_DEC_REG1, IR_DEC_REG1_IRQSEL,
-			  FIELD_PREP(IR_DEC_REG1_IRQSEL, IRQSEL_RISE_FALL));
+	regmap_update_bits(ir->reg, IR_DEC_REG1, IR_DEC_REG1_IRQSEL,
+			   FIELD_PREP(IR_DEC_REG1_IRQSEL, IRQSEL_RISE_FALL));
 	/* Enable the decoder */
-	meson_ir_set_mask(ir, IR_DEC_REG1, IR_DEC_REG1_ENABLE,
-			  IR_DEC_REG1_ENABLE);
+	regmap_update_bits(ir->reg, IR_DEC_REG1, IR_DEC_REG1_ENABLE,
+			   IR_DEC_REG1_ENABLE);
 
 	dev_info(dev, "receiver initialized\n");
 
@@ -177,7 +180,7 @@ static void meson_ir_remove(struct platform_device *pdev)
 
 	/* Disable the decoder */
 	spin_lock_irqsave(&ir->lock, flags);
-	meson_ir_set_mask(ir, IR_DEC_REG1, IR_DEC_REG1_ENABLE, 0);
+	regmap_update_bits(ir->reg, IR_DEC_REG1, IR_DEC_REG1_ENABLE, 0);
 	spin_unlock_irqrestore(&ir->lock, flags);
 }
 
@@ -195,15 +198,16 @@ static void meson_ir_shutdown(struct platform_device *pdev)
 	 * bootloader a chance to power the system back on
 	 */
 	if (of_device_is_compatible(node, "amlogic,meson6-ir"))
-		meson_ir_set_mask(ir, IR_DEC_REG1, IR_DEC_REG1_MODE,
-				  FIELD_PREP(IR_DEC_REG1_MODE, DEC_MODE_NEC));
+		regmap_update_bits(ir->reg, IR_DEC_REG1, IR_DEC_REG1_MODE,
+				   FIELD_PREP(IR_DEC_REG1_MODE, DEC_MODE_NEC));
 	else
-		meson_ir_set_mask(ir, IR_DEC_REG2, IR_DEC_REG2_MODE,
-				  FIELD_PREP(IR_DEC_REG2_MODE, DEC_MODE_NEC));
+		regmap_update_bits(ir->reg, IR_DEC_REG2, IR_DEC_REG2_MODE,
+				   FIELD_PREP(IR_DEC_REG2_MODE, DEC_MODE_NEC));
 
 	/* Set rate to default value */
-	meson_ir_set_mask(ir, IR_DEC_REG0, IR_DEC_REG0_BASE_TIME,
-			  MESON_HW_TRATE - 1);
+	regmap_update_bits(ir->reg, IR_DEC_REG0, IR_DEC_REG0_BASE_TIME,
+			   FIELD_PREP(IR_DEC_REG0_BASE_TIME,
+				      MESON_HW_TRATE - 1));
 
 	spin_unlock_irqrestore(&ir->lock, flags);
 }
-- 
2.35.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic