[PATCH 0/5] arm64: dts: meson: u200 audio clean up

[PATCH 0/5] arm64: dts: meson: u200 audio clean up

[Jerome Brunet]

This patchset fixes the recently merged audio support for u200 and adds the
missing onboard audio devices

Jerome Brunet (5):
  arm64: dts: meson: u200: fix spdif output pin
  arm64: dts: meson: u200: add missing audio clock controller
  arm64: dts: meson: u200: add spdifout b routes
  arm64: dts: meson: u200: use TDM C for HDMI
  arm64: dts: meson: u200: add onboard devices

 .../boot/dts/amlogic/meson-g12a-u200.dts      | 237 +++++++++++++++++-
 1 file changed, 226 insertions(+), 11 deletions(-)

-- 
2.40.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 1/5] arm64: dts: meson: u200: fix spdif output pin

[Jerome Brunet]

u200 outputs spdif on GPIOAO_10, not GPIOH_4 which is used for the LCD
panel.

Fixes: cfae4eadb7cd ("arm64: dts: meson: add audio playback to u200")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
index 2878e3ad7de2..8fa17a62534c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
@@ -396,7 +396,7 @@ &sd_emmc_c {
 };
 
 &spdifout {
-	pinctrl-0 = <&spdif_out_h_pins>;
+	pinctrl-0 = <&spdif_ao_out_pins>;
 	pinctrl-names = "default";
 	status = "okay";
 };
-- 
2.40.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 2/5] arm64: dts: meson: u200: add missing audio clock controller

[Jerome Brunet]

The audio subsystem will not work if the audio clock controller is not
enabled.

Fixes: cfae4eadb7cd ("arm64: dts: meson: add audio playback to u200")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
index 8fa17a62534c..2380d237d220 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
@@ -286,6 +286,10 @@ &cpu3 {
 	clock-latency = <50000>;
 };
 
+&clkc_audio {
+	status = "okay";
+};
+
 &cvbs_vdac_port {
 	cvbs_vdac_out: endpoint {
 		remote-endpoint = <&cvbs_connector_in>;
-- 
2.40.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 3/5] arm64: dts: meson: u200: add spdifout b routes

[Jerome Brunet]

spdifout B remains untested as it can only feed the HDMI controller, which
does not support spdif ATM.

Still if the u200 has spdifout b, the routes to it should be set.

Fixes: cfae4eadb7cd ("arm64: dts: meson: add audio playback to u200")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
index 2380d237d220..921b62c5ab33 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
@@ -166,7 +166,10 @@ sound {
 				"TDM_B Playback", "TDMOUT_B OUT",
 				"SPDIFOUT IN 0", "FRDDR_A OUT 3",
 				"SPDIFOUT IN 1", "FRDDR_B OUT 3",
-				"SPDIFOUT IN 2", "FRDDR_C OUT 3";
+				"SPDIFOUT IN 2", "FRDDR_C OUT 3",
+				"SPDIFOUT_B IN 0", "FRDDR_A OUT 4",
+				"SPDIFOUT_B IN 1", "FRDDR_B OUT 4",
+				"SPDIFOUT_B IN 2", "FRDDR_C OUT 4";
 
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
-- 
2.40.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 4/5] arm64: dts: meson: u200: use TDM C for HDMI

[Jerome Brunet]

On the u200, TDM B is wired to the onboard AD82584F i2c speaker codec.
This makes TDM B a poor choice for the interface dedicated to HDMI which
uses 4 i2s lanes.

TDM A is not a good choice either as it is connected to the SDIO wifi/bt
chip.

TDM C is not used externally by default, which makes it a better choice for
the HDMI interface.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
index 921b62c5ab33..da66e2e1dffb 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
@@ -159,10 +159,10 @@ vddcpu: regulator-vddcpu {
 	sound {
 		compatible = "amlogic,axg-sound-card";
 		model = "U200";
-		audio-aux-devs = <&tdmout_b>;
-		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
-				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
-				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+		audio-aux-devs = <&tdmout_c>;
+		audio-routing = "TDMOUT_C IN 0", "FRDDR_A OUT 2",
+				"TDMOUT_C IN 1", "FRDDR_B OUT 2",
+				"TDMOUT_C IN 2", "FRDDR_C OUT 2",
 				"TDM_B Playback", "TDMOUT_B OUT",
 				"SPDIFOUT IN 0", "FRDDR_A OUT 3",
 				"SPDIFOUT IN 1", "FRDDR_B OUT 3",
@@ -193,7 +193,7 @@ dai-link-2 {
 
 		/* 8ch hdmi interface */
 		dai-link-3 {
-			sound-dai = <&tdmif_b>;
+			sound-dai = <&tdmif_c>;
 			dai-format = "i2s";
 			dai-tdm-slot-tx-mask-0 = <1 1>;
 			dai-tdm-slot-tx-mask-1 = <1 1>;
@@ -202,7 +202,7 @@ dai-link-3 {
 			mclk-fs = <256>;
 
 			codec {
-				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>;
 			};
 		};
 
@@ -412,11 +412,11 @@ &spdifout_b {
 	status = "okay";
 };
 
-&tdmif_b {
+&tdmif_c {
 	status = "okay";
 };
 
-&tdmout_b {
+&tdmout_c {
 	status = "okay";
 };
 
-- 
2.40.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 5/5] arm64: dts: meson: u200: add onboard devices

[Jerome Brunet]

Add missing audio devices found on the u200 PCB. This includes
* Lineout connected to the internal DAC
* SPDIF input connected to a coaxial socket
* TDM input decoders allowing output loopback
* TDM A and B output encoders and interfaces

TDM A and B link format is set by the related external codec.
Internal audio DAC can hook to any TDM output.

This change does not include support necessary the optional the speaker and
PDM Mic headers

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 .../boot/dts/amlogic/meson-g12a-u200.dts      | 228 +++++++++++++++++-
 1 file changed, 218 insertions(+), 10 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
index da66e2e1dffb..9abe37b5b227 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
@@ -9,6 +9,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/gpio/meson-g12a-gpio.h>
 #include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+#include <dt-bindings/sound/meson-g12a-toacodec.h>
 
 / {
 	compatible = "amlogic,u200", "amlogic,g12a";
@@ -19,6 +20,22 @@ aliases {
 		ethernet0 = &ethmac;
 	};
 
+	dioo2133: audio-amplifier-0 {
+		#sound-dai-cells = <0>;
+		compatible = "simple-audio-amplifier";
+		status = "okay";
+		enable-gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
+		VCC-supply = <&vcc_5v>;
+		sound-name-prefix = "10U2";
+	};
+
+	spdif_dir: audio-codec-0 {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dir";
+		status = "okay";
+		sound-name-prefix = "DIR";
+	};
+
 	spdif_dit: audio-codec-1 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
@@ -159,17 +176,71 @@ vddcpu: regulator-vddcpu {
 	sound {
 		compatible = "amlogic,axg-sound-card";
 		model = "U200";
-		audio-aux-devs = <&tdmout_c>;
-		audio-routing = "TDMOUT_C IN 0", "FRDDR_A OUT 2",
+		audio-widgets = "Line", "Lineout";
+		audio-aux-devs = <&tdmout_a>, <&tdmout_b>, <&tdmout_c>,
+				 <&tdmin_a>, <&tdmin_b>, <&tdmin_c>,
+				 <&tdmin_lb>, <&dioo2133>;
+		audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
+				"TDMOUT_A IN 1", "FRDDR_B OUT 0",
+				"TDMOUT_A IN 2", "FRDDR_C OUT 0",
+				"TDM_A Playback", "TDMOUT_A OUT",
+				"TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT",
+				"TDMOUT_C IN 0", "FRDDR_A OUT 2",
 				"TDMOUT_C IN 1", "FRDDR_B OUT 2",
 				"TDMOUT_C IN 2", "FRDDR_C OUT 2",
-				"TDM_B Playback", "TDMOUT_B OUT",
+				"TDM_C Playback", "TDMOUT_C OUT",
 				"SPDIFOUT IN 0", "FRDDR_A OUT 3",
 				"SPDIFOUT IN 1", "FRDDR_B OUT 3",
 				"SPDIFOUT IN 2", "FRDDR_C OUT 3",
 				"SPDIFOUT_B IN 0", "FRDDR_A OUT 4",
 				"SPDIFOUT_B IN 1", "FRDDR_B OUT 4",
-				"SPDIFOUT_B IN 2", "FRDDR_C OUT 4";
+				"SPDIFOUT_B IN 2", "FRDDR_C OUT 4",
+				"TDMIN_A IN 0", "TDM_A Capture",
+				"TDMIN_A IN 1", "TDM_B Capture",
+				"TDMIN_A IN 2", "TDM_C Capture",
+				"TDMIN_A IN 3", "TDM_A Loopback",
+				"TDMIN_A IN 4", "TDM_B Loopback",
+				"TDMIN_A IN 5", "TDM_C Loopback",
+				"TDMIN_B IN 0", "TDM_A Capture",
+				"TDMIN_B IN 1", "TDM_B Capture",
+				"TDMIN_B IN 2", "TDM_C Capture",
+				"TDMIN_B IN 3", "TDM_A Loopback",
+				"TDMIN_B IN 4", "TDM_B Loopback",
+				"TDMIN_B IN 5", "TDM_C Loopback",
+				"TDMIN_C IN 0", "TDM_A Capture",
+				"TDMIN_C IN 1", "TDM_B Capture",
+				"TDMIN_C IN 2", "TDM_C Capture",
+				"TDMIN_C IN 3", "TDM_A Loopback",
+				"TDMIN_C IN 4", "TDM_B Loopback",
+				"TDMIN_C IN 5", "TDM_C Loopback",
+				"TDMIN_LB IN 3", "TDM_A Capture",
+				"TDMIN_LB IN 4", "TDM_B Capture",
+				"TDMIN_LB IN 5", "TDM_C Capture",
+				"TDMIN_LB IN 0", "TDM_A Loopback",
+				"TDMIN_LB IN 1", "TDM_B Loopback",
+				"TDMIN_LB IN 2", "TDM_C Loopback",
+				"TODDR_A IN 0", "TDMIN_A OUT",
+				"TODDR_B IN 0", "TDMIN_A OUT",
+				"TODDR_C IN 0", "TDMIN_A OUT",
+				"TODDR_A IN 1", "TDMIN_B OUT",
+				"TODDR_B IN 1", "TDMIN_B OUT",
+				"TODDR_C IN 1", "TDMIN_B OUT",
+				"TODDR_A IN 2", "TDMIN_C OUT",
+				"TODDR_B IN 2", "TDMIN_C OUT",
+				"TODDR_C IN 2", "TDMIN_C OUT",
+				"TODDR_A IN 3", "SPDIFIN Capture",
+				"TODDR_B IN 3", "SPDIFIN Capture",
+				"TODDR_C IN 3", "SPDIFIN Capture",
+				"TODDR_A IN 6", "TDMIN_LB OUT",
+				"TODDR_B IN 6", "TDMIN_LB OUT",
+				"TODDR_C IN 6", "TDMIN_LB OUT",
+				"10U2 INL", "ACODEC LOLP",
+				"10U2 INR", "ACODEC LORP",
+				"Lineout", "10U2 OUTL",
+				"Lineout", "10U2 OUTR";
 
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
@@ -191,8 +262,52 @@ dai-link-2 {
 			sound-dai = <&frddr_c>;
 		};
 
-		/* 8ch hdmi interface */
 		dai-link-3 {
+			sound-dai = <&toddr_a>;
+		};
+
+		dai-link-4 {
+			sound-dai = <&toddr_b>;
+		};
+
+		dai-link-5 {
+			sound-dai = <&toddr_c>;
+		};
+
+		/* Connected to the WIFI/BT chip */
+		dai-link-6 {
+			sound-dai = <&tdmif_a>;
+			dai-format = "dsp_a";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&toacodec TOACODEC_IN_A>;
+			};
+
+			codec-1 {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
+			};
+		};
+
+		/* Connected to the onboard AD82584F DAC */
+		dai-link-7 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&toacodec TOACODEC_IN_B>;
+			};
+
+			codec-1 {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* 8ch HDMI interface */
+		dai-link-8 {
 			sound-dai = <&tdmif_c>;
 			dai-format = "i2s";
 			dai-tdm-slot-tx-mask-0 = <1 1>;
@@ -201,13 +316,17 @@ dai-link-3 {
 			dai-tdm-slot-tx-mask-3 = <1 1>;
 			mclk-fs = <256>;
 
-			codec {
+			codec-0 {
+				sound-dai = <&toacodec TOACODEC_IN_C>;
+			};
+
+			codec-1 {
 				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>;
 			};
 		};
 
-		/* spdif hdmi or toslink interface */
-		dai-link-4 {
+		/* spdif hdmi and coax output */
+		dai-link-9 {
 			sound-dai = <&spdifout>;
 
 			codec-0 {
@@ -220,7 +339,7 @@ codec-1 {
 		};
 
 		/* spdif hdmi interface */
-		dai-link-5 {
+		dai-link-10 {
 			sound-dai = <&spdifout_b>;
 
 			codec {
@@ -229,16 +348,38 @@ codec {
 		};
 
 		/* hdmi glue */
-		dai-link-6 {
+		dai-link-11 {
 			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
 
 			codec {
 				sound-dai = <&hdmi_tx>;
 			};
 		};
+
+		/* internal codec glue */
+		dai-link-12 {
+			sound-dai = <&toacodec TOACODEC_OUT>;
+
+			codec {
+				sound-dai = <&acodec>;
+			};
+		};
+
+		/* spdif coax input */
+		dai-link-13 {
+			sound-dai = <&spdifin>;
+
+			codec {
+				sound-dai = <&spdif_dir>;
+			};
+		};
 	};
 };
 
+&acodec {
+	status = "okay";
+};
+
 &arb {
 	status = "okay";
 };
@@ -402,6 +543,12 @@ &sd_emmc_c {
 	vqmmc-supply = <&flash_1v8>;
 };
 
+&spdifin {
+	pinctrl-0 = <&spdif_in_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
 &spdifout {
 	pinctrl-0 = <&spdif_ao_out_pins>;
 	pinctrl-names = "default";
@@ -412,14 +559,75 @@ &spdifout_b {
 	status = "okay";
 };
 
+&tdmif_a {
+	pinctrl-0 = <&tdm_a_fs_pins>, <&tdm_a_sclk_pins>, <&tdm_a_dout0_pins> ;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&tdmif_b {
+	pinctrl-0 = <&mclk0_a_pins>, <&tdm_b_fs_pins>, <&tdm_b_sclk_pins>,
+		    <&tdm_b_dout0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	assigned-clocks = <&clkc_audio AUD_CLKID_TDM_MCLK_PAD0>,
+			  <&clkc_audio AUD_CLKID_TDM_SCLK_PAD1>,
+			  <&clkc_audio AUD_CLKID_TDM_LRCLK_PAD1>;
+	assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_B_MCLK>,
+				 <&clkc_audio AUD_CLKID_MST_B_SCLK>,
+				 <&clkc_audio AUD_CLKID_MST_B_LRCLK>;
+	assigned-clock-rates = <0>, <0>, <0>;
+};
+
 &tdmif_c {
 	status = "okay";
 };
 
+&tdmin_a {
+	status = "okay";
+};
+
+&tdmin_b {
+	status = "okay";
+};
+
+&tdmin_c {
+	status = "okay";
+};
+
+&tdmin_lb {
+	status = "okay";
+};
+
+&tdmout_a {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
 &tdmout_c {
 	status = "okay";
 };
 
+&toacodec {
+	status = "okay";
+};
+
+&toddr_a {
+	status = "okay";
+};
+
+&toddr_b {
+	status = "okay";
+};
+
+&toddr_c {
+	status = "okay";
+};
+
 &tohdmitx {
 	status = "okay";
 };
-- 
2.40.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 5/5] arm64: dts: meson: u200: add onboard devices

[Krzysztof Kozlowski]

On 11/09/2023 17:45, Jerome Brunet wrote:
> Add missing audio devices found on the u200 PCB. This includes
> * Lineout connected to the internal DAC
> * SPDIF input connected to a coaxial socket
> * TDM input decoders allowing output loopback
> * TDM A and B output encoders and interfaces
> 
> TDM A and B link format is set by the related external codec.
> Internal audio DAC can hook to any TDM output.
> 
> This change does not include support necessary the optional the speaker and
> PDM Mic headers
> 
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
> ---
>  .../boot/dts/amlogic/meson-g12a-u200.dts      | 228 +++++++++++++++++-
>  1 file changed, 218 insertions(+), 10 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
> index da66e2e1dffb..9abe37b5b227 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
> @@ -9,6 +9,7 @@
>  #include <dt-bindings/gpio/gpio.h>
>  #include <dt-bindings/gpio/meson-g12a-gpio.h>
>  #include <dt-bindings/sound/meson-g12a-tohdmitx.h>
> +#include <dt-bindings/sound/meson-g12a-toacodec.h>
>  
>  / {
>  	compatible = "amlogic,u200", "amlogic,g12a";
> @@ -19,6 +20,22 @@ aliases {
>  		ethernet0 = &ethmac;
>  	};
>  
> +	dioo2133: audio-amplifier-0 {
> +		#sound-dai-cells = <0>;
> +		compatible = "simple-audio-amplifier";

compatible is by convention first property. Do you have different style
in Amlogic/Meson?

> +		status = "okay";

status is by default.


Best regards,
Krzysztof


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 5/5] arm64: dts: meson: u200: add onboard devices

[Neil Armstrong]

On 11/09/2023 17:56, Krzysztof Kozlowski wrote:
> On 11/09/2023 17:45, Jerome Brunet wrote:
>> Add missing audio devices found on the u200 PCB. This includes
>> * Lineout connected to the internal DAC
>> * SPDIF input connected to a coaxial socket
>> * TDM input decoders allowing output loopback
>> * TDM A and B output encoders and interfaces
>>
>> TDM A and B link format is set by the related external codec.
>> Internal audio DAC can hook to any TDM output.
>>
>> This change does not include support necessary the optional the speaker and
>> PDM Mic headers
>>
>> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
>> ---
>>   .../boot/dts/amlogic/meson-g12a-u200.dts      | 228 +++++++++++++++++-
>>   1 file changed, 218 insertions(+), 10 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
>> index da66e2e1dffb..9abe37b5b227 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
>> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
>> @@ -9,6 +9,7 @@
>>   #include <dt-bindings/gpio/gpio.h>
>>   #include <dt-bindings/gpio/meson-g12a-gpio.h>
>>   #include <dt-bindings/sound/meson-g12a-tohdmitx.h>
>> +#include <dt-bindings/sound/meson-g12a-toacodec.h>
>>   
>>   / {
>>   	compatible = "amlogic,u200", "amlogic,g12a";
>> @@ -19,6 +20,22 @@ aliases {
>>   		ethernet0 = &ethmac;
>>   	};
>>   
>> +	dioo2133: audio-amplifier-0 {
>> +		#sound-dai-cells = <0>;
>> +		compatible = "simple-audio-amplifier";
> 
> compatible is by convention first property. Do you have different style
> in Amlogic/Meson?

Not really, no specific style

> 
>> +		status = "okay";
> 
> status is by default.

I'll fix the patch on my tree.

Thanks,
Neil

> 
> 
> Best regards,
> Krzysztof
> 


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 5/5] arm64: dts: meson: u200: add onboard devices

[Jerome Brunet]

On Mon 11 Sep 2023 at 17:56, Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote:

> On 11/09/2023 17:45, Jerome Brunet wrote:
>> Add missing audio devices found on the u200 PCB. This includes
>> * Lineout connected to the internal DAC
>> * SPDIF input connected to a coaxial socket
>> * TDM input decoders allowing output loopback
>> * TDM A and B output encoders and interfaces
>> 
>> TDM A and B link format is set by the related external codec.
>> Internal audio DAC can hook to any TDM output.
>> 
>> This change does not include support necessary the optional the speaker and
>> PDM Mic headers
>> 
>> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
>> ---
>>  .../boot/dts/amlogic/meson-g12a-u200.dts      | 228 +++++++++++++++++-
>>  1 file changed, 218 insertions(+), 10 deletions(-)
>> 
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
>> index da66e2e1dffb..9abe37b5b227 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
>> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
>> @@ -9,6 +9,7 @@
>>  #include <dt-bindings/gpio/gpio.h>
>>  #include <dt-bindings/gpio/meson-g12a-gpio.h>
>>  #include <dt-bindings/sound/meson-g12a-tohdmitx.h>
>> +#include <dt-bindings/sound/meson-g12a-toacodec.h>
>>  
>>  / {
>>  	compatible = "amlogic,u200", "amlogic,g12a";
>> @@ -19,6 +20,22 @@ aliases {
>>  		ethernet0 = &ethmac;
>>  	};
>>  
>> +	dioo2133: audio-amplifier-0 {
>> +		#sound-dai-cells = <0>;
>> +		compatible = "simple-audio-amplifier";
>
> compatible is by convention first property. Do you have different style
> in Amlogic/Meson?
>
>> +		status = "okay";
>
> status is by default.
>

It look odd to me too but this was be consistent with the other codec
introduced by the change being fixed by this patchset.

>
> Best regards,
> Krzysztof


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 0/5] arm64: dts: meson: u200 audio clean up

[Neil Armstrong]

Hi,

On Mon, 11 Sep 2023 17:45:36 +0200, Jerome Brunet wrote:
> This patchset fixes the recently merged audio support for u200 and adds the
> missing onboard audio devices
> 
> Jerome Brunet (5):
>   arm64: dts: meson: u200: fix spdif output pin
>   arm64: dts: meson: u200: add missing audio clock controller
>   arm64: dts: meson: u200: add spdifout b routes
>   arm64: dts: meson: u200: use TDM C for HDMI
>   arm64: dts: meson: u200: add onboard devices
> 
> [...]

Thanks, Applied to https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git (v6.7/arm64-dt)

[1/5] arm64: dts: meson: u200: fix spdif output pin
      https://git.kernel.org/amlogic/c/66561cb158d0a25054bbcf423d59dd782311f60d
[2/5] arm64: dts: meson: u200: add missing audio clock controller
      https://git.kernel.org/amlogic/c/f9dc2d96e1bfb33635df7edf0a1b8572bbb20954
[3/5] arm64: dts: meson: u200: add spdifout b routes
      https://git.kernel.org/amlogic/c/4e47ea869289dab588c0152ec90d6eb5bf7f7169
[4/5] arm64: dts: meson: u200: use TDM C for HDMI
      https://git.kernel.org/amlogic/c/956236a24aec8364a3ee5d287e23c0c01cfb9c7c
[5/5] arm64: dts: meson: u200: add onboard devices
      https://git.kernel.org/amlogic/c/f1decbd5629bf0dbd3af3b2f803f72a27eb01c7f

These changes has been applied on the intermediate git tree [1].

The v6.7/arm64-dt branch will then be sent via a formal Pull Request to the Linux SoC maintainers
for inclusion in their intermediate git branches in order to be sent to Linus during
the next merge window, or sooner if it's a set of fixes.

In the cases of fixes, those will be merged in the current release candidate
kernel and as soon they appear on the Linux master branch they will be
backported to the previous Stable and Long-Stable kernels [2].

The intermediate git branches are merged daily in the linux-next tree [3],
people are encouraged testing these pre-release kernels and report issues on the
relevant mailing-lists.

If problems are discovered on those changes, please submit a signed-off-by revert
patch followed by a corrective changeset.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git
[2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
[3] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git

-- 
Neil


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic