* [PATCH AUTOSEL 6.6 086/104] arm64: dts: amlogic: fix format for s4 uart node
[not found] <20240116194908.253437-1-sashal@kernel.org>
@ 2024-01-16 19:46 ` Sasha Levin
0 siblings, 0 replies; only message in thread
From: Sasha Levin @ 2024-01-16 19:46 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Xianwei Zhao, Neil Armstrong, Sasha Levin, robh+dt,
krzysztof.kozlowski+dt, conor+dt, khilman, devicetree,
linux-arm-kernel, linux-amlogic
From: Xianwei Zhao <xianwei.zhao@amlogic.com>
[ Upstream commit eb54ef36282f670c704ed5af8593da62bebba80d ]
Aliases use lowercase letters and place status in end.
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231215-s4-dts-v1-1-7831ab6972be@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts | 4 ++--
arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
index 8ffbcb2b1ac5..bbd3c05cbd90 100644
--- a/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
@@ -15,7 +15,7 @@ / {
#size-cells = <2>;
aliases {
- serial0 = &uart_B;
+ serial0 = &uart_b;
};
memory@0 {
@@ -25,6 +25,6 @@ memory@0 {
};
-&uart_B {
+&uart_b {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
index f24460186d3d..55ddea6dc9f8 100644
--- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
@@ -118,14 +118,14 @@ gpio_intc: interrupt-controller@4080 {
<10 11 12 13 14 15 16 17 18 19 20 21>;
};
- uart_B: serial@7a000 {
+ uart_b: serial@7a000 {
compatible = "amlogic,meson-s4-uart",
"amlogic,meson-ao-uart";
reg = <0x0 0x7a000 0x0 0x18>;
interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
- status = "disabled";
clocks = <&xtal>, <&xtal>, <&xtal>;
clock-names = "xtal", "pclk", "baud";
+ status = "disabled";
};
reset: reset-controller@2000 {
--
2.43.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] only message in thread