From: Christian Hewitt <christianshewitt@gmail.com>
To: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Neil Armstrong <neil.armstrong@linaro.org>,
Kevin Hilman <khilman@baylibre.com>,
Jerome Brunet <jbrunet@baylibre.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH 2/2] arm64: dts: meson: add GXLX/S905L/p271 support
Date: Tue, 4 Jun 2024 08:41:34 +0000 [thread overview]
Message-ID: <20240604084134.3315841-2-christianshewitt@gmail.com> (raw)
In-Reply-To: <20240604084134.3315841-1-christianshewitt@gmail.com>
Add a device-tree for the GXLX Amlogic P271 (S905L) reference design
board. This is a low-cost design similar to P281 (S905W) but with
silicon differences to omit VP9 and use Mali 450-MP2 (not MP3). The
SoC is marked with S905L and "2" (believed to denote MP2) resulting
in chip distributor stock lists and Android STB marketing sometimes
describing it as an S905L2 chip.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
NOTE: This patch depends upon the following submitted patches for
VDEC [0] and SARADC [1] support:
[0] https://patchwork.kernel.org/project/linux-amlogic/list/?series=858514
[1] https://patchwork.kernel.org/project/linux-amlogic/list/?series=858525
CHECK_DTBS generates some warnings for pre-existing issues inherited
from common dtsi files. The patch does not add any new issues.
arch/arm64/boot/dts/amlogic/Makefile | 1 +
.../dts/amlogic/meson-gxlx-s905l-p271.dts | 51 +++++++++++++++++++
2 files changed, 52 insertions(+)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxlx-s905l-p271.dts
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 0f29517da5ec..0746e01b5853 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -62,6 +62,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc-v2.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxlx-s905l-p271.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-gt1-ultimate.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-mecool-kiii-pro.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxlx-s905l-p271.dts b/arch/arm64/boot/dts/amlogic/meson-gxlx-s905l-p271.dts
new file mode 100644
index 000000000000..1221f4545130
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxlx-s905l-p271.dts
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905x.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+
+/ {
+ compatible = "amlogic,p271", "amlogic,s905l", "amlogic,meson-gxlx";
+ model = "Amlogic Meson GXLX (S905L) P271 Development Board";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x40000000>;
+ };
+
+ sound {
+ model = "P271";
+ };
+};
+
+&apb {
+ mali: gpu@c0000 {
+ /* Mali 450-MP2 */
+ interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gp", "gpmmu", "pp", "pmu",
+ "pp0", "ppmmu0", "pp1", "ppmmu1";
+ };
+};
+
+&saradc {
+ compatible = "amlogic,meson-gxlx-saradc", "amlogic,meson-saradc";
+};
+
+&usb {
+ dr_mode = "host";
+};
+
+&vdec {
+ compatible = "amlogic,gxlx-vdec", "amlogic,gx-vdec";
+};
--
2.34.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2024-06-04 8:41 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-04 8:41 [PATCH 1/2] dt-bindings: arm: amlogic: add GXLX/S905L/p271 reference board Christian Hewitt
2024-06-04 8:41 ` Christian Hewitt [this message]
2024-06-05 8:46 ` [PATCH 2/2] arm64: dts: meson: add GXLX/S905L/p271 support Neil Armstrong
2024-06-04 15:28 ` [PATCH 1/2] dt-bindings: arm: amlogic: add GXLX/S905L/p271 reference board Rob Herring (Arm)
2024-06-04 15:30 ` Krzysztof Kozlowski
2024-06-06 9:13 ` Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240604084134.3315841-2-christianshewitt@gmail.com \
--to=christianshewitt@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jbrunet@baylibre.com \
--cc=khilman@baylibre.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=martin.blumenstingl@googlemail.com \
--cc=neil.armstrong@linaro.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®