[PATCH] ASoC: meson: Use dev_err_probe() for device reset failures

[PATCH] ASoC: meson: Use dev_err_probe() for device reset failures

[phucduc.bui]

From: bui duc phuc <phucduc.bui@gmail.com>

device_reset() may return -EPROBE_DEFER. Switch to dev_err_probe() so
probe failures are reported consistently and deferred probing is handled
properly.
This matches the existing pattern used in aiu_probe().
No functional change intended.

Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
---
 sound/soc/meson/g12a-toacodec.c | 2 +-
 sound/soc/meson/g12a-tohdmitx.c | 2 +-
 sound/soc/meson/t9015.c         | 6 ++----
 3 files changed, 4 insertions(+), 6 deletions(-)

diff --git a/sound/soc/meson/g12a-toacodec.c b/sound/soc/meson/g12a-toacodec.c
index a95375b53f0a..21941ee552c5 100644
--- a/sound/soc/meson/g12a-toacodec.c
+++ b/sound/soc/meson/g12a-toacodec.c
@@ -312,7 +312,7 @@ static int g12a_toacodec_probe(struct platform_device *pdev)
 
 	ret = device_reset(dev);
 	if (ret)
-		return ret;
+		return dev_err_probe(dev, ret, "failed to reset device\n");
 
 	regs = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(regs))
diff --git a/sound/soc/meson/g12a-tohdmitx.c b/sound/soc/meson/g12a-tohdmitx.c
index d541ca4acfaf..967109ca2b57 100644
--- a/sound/soc/meson/g12a-tohdmitx.c
+++ b/sound/soc/meson/g12a-tohdmitx.c
@@ -251,7 +251,7 @@ static int g12a_tohdmitx_probe(struct platform_device *pdev)
 
 	ret = device_reset(dev);
 	if (ret)
-		return ret;
+		return dev_err_probe(dev, ret, "failed to reset device\n");
 
 	regs = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(regs))
diff --git a/sound/soc/meson/t9015.c b/sound/soc/meson/t9015.c
index da1a93946d67..f0b55aee5241 100644
--- a/sound/soc/meson/t9015.c
+++ b/sound/soc/meson/t9015.c
@@ -265,10 +265,8 @@ static int t9015_probe(struct platform_device *pdev)
 		return dev_err_probe(dev, PTR_ERR(priv->avdd), "failed to AVDD\n");
 
 	ret = device_reset(dev);
-	if (ret) {
-		dev_err(dev, "reset failed\n");
-		return ret;
-	}
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to reset device\n");
 
 	regs = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(regs)) {
-- 
2.43.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH] ASoC: meson: Use dev_err_probe() for device reset failures

[Mark Brown]

On Fri, 12 Jun 2026 09:01:12 +0700, phucduc.bui@gmail.com wrote:
> ASoC: meson: Use dev_err_probe() for device reset failures

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-7.3

Thanks!

[1/1] ASoC: meson: Use dev_err_probe() for device reset failures
      https://git.kernel.org/broonie/sound/c/6ed013a581d0

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic