mirror of https://lore.kernel.org/linux-amlogic/
 help / color / mirror / Atom feed
From: Ronald Claveau via B4 Relay <devnull+linux-kernel-dev.aliel.fr@kernel.org>
To: Neil Armstrong <neil.armstrong@linaro.org>,
	 Jerome Brunet <jbrunet@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>,
	 Brian Masney <bmasney+clk@redhat.com>,
	Kevin Hilman <khilman@baylibre.com>,
	 Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
	 Jian Hu <jian.hu@amlogic.com>
Cc: linux-amlogic@lists.infradead.org, linux-clk@vger.kernel.org,
	 linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	 Ronald Claveau <linux-kernel-dev@aliel.fr>
Subject: [PATCH 0/4] clk: meson: g12a: fix a few clock definition errors
Date: Thu, 22 Oct 2026 23:52:38 +0200	[thread overview]
Message-ID: <20261022-fix-g12a-clk-v1-0-e2bd8f3f1afa@aliel.fr> (raw)

While reviewing the G12A clock controller, I noticed two unrelated
mistakes in the clock definitions:

 - fclk_div2p5 uses mult = 1 instead of 2, so it runs at fclk / 5
   instead of fclk / 2.5.
 - CLKID_VID_PLL and CLKID_VID_PLL_DIV are swapped in the hw_onecell_data
   tables.

The first one is a single fix. The second one is split per SoC (g12a,
g12b, sm1) since each table was introduced by a different commit so
I provide different Fixes: tag.

I do not see any consumer today, so nobody should be affected.
I don't think there is any values in backporting them btw.

Signed-off-by: Ronald Claveau <linux-kernel-dev@aliel.fr>
---
Ronald Claveau (4):
      clk: meson: g12a: fix fclk_div2p5 multiplier
      clk: meson: g12a: fix swapped VID_PLL and VID_PLL_DIV clock ids
      clk: meson: g12a: fix swapped VID_PLL and VID_PLL_DIV clock ids for g12b
      clk: meson: g12a: fix swapped VID_PLL and VID_PLL_DIV clock ids for sm1

 drivers/clk/meson/g12a.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
---
base-commit: d419d682257d813f6cb7a28e42b35d0edf4ad038
change-id: 20261022-fix-g12a-clk-1fb52b15cfa6

Best regards,
--  
Ronald Claveau <linux-kernel-dev@aliel.fr>



_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

             reply	other threads:[~2026-10-22 21:53 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-22 21:52 Ronald Claveau via B4 Relay [this message]
2026-10-22 21:52 ` [PATCH 1/4] clk: meson: g12a: fix fclk_div2p5 multiplier Ronald Claveau via B4 Relay
2026-10-22 22:00   ` sashiko-bot
2026-10-22 21:52 ` [PATCH 2/4] clk: meson: g12a: fix swapped VID_PLL and VID_PLL_DIV clock ids Ronald Claveau via B4 Relay
2026-10-22 21:52 ` [PATCH 3/4] clk: meson: g12a: fix swapped VID_PLL and VID_PLL_DIV clock ids for g12b Ronald Claveau via B4 Relay
2026-10-22 21:52 ` [PATCH 4/4] clk: meson: g12a: fix swapped VID_PLL and VID_PLL_DIV clock ids for sm1 Ronald Claveau via B4 Relay

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261022-fix-g12a-clk-v1-0-e2bd8f3f1afa@aliel.fr \
    --to=devnull+linux-kernel-dev.aliel.fr@kernel.org \
    --cc=bmasney+clk@redhat.com \
    --cc=jbrunet@baylibre.com \
    --cc=jian.hu@amlogic.com \
    --cc=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel-dev@aliel.fr \
    --cc=linux-kernel@vger.kernel.org \
    --cc=martin.blumenstingl@googlemail.com \
    --cc=neil.armstrong@linaro.org \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®