* [PATCH] thermal: amlogic: Add hwmon support
@ 2020-11-15 19:06 Martin Blumenstingl
2020-11-16 8:35 ` Neil Armstrong
2020-11-16 9:31 ` Daniel Lezcano
0 siblings, 2 replies; 3+ messages in thread
From: Martin Blumenstingl @ 2020-11-15 19:06 UTC (permalink / raw)
To: glaroque, linux-pm, linux-amlogic
Cc: amitk, Martin Blumenstingl, rui.zhang, daniel.lezcano, linux-kernel
Many monitoring tools read the CPU temperature using the hwmon
interface. Expose the thermal sensors on Amlogic boards as hwmon
devices.
Without this lm_sensors' "sensors" tool does not find any temperature
sensors. Now it prints:
cpu_thermal-virtual-0
Adapter: Virtual device
temp1: +44.7 C (crit = +110.0 C)
ddr_thermal-virtual-0
Adapter: Virtual device
temp1: +45.9 C (crit = +110.0 C)
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
drivers/thermal/amlogic_thermal.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/thermal/amlogic_thermal.c b/drivers/thermal/amlogic_thermal.c
index ccb1fe18e993..dffe3ba8c7c4 100644
--- a/drivers/thermal/amlogic_thermal.c
+++ b/drivers/thermal/amlogic_thermal.c
@@ -29,6 +29,7 @@
#include <linux/thermal.h>
#include "thermal_core.h"
+#include "thermal_hwmon.h"
#define TSENSOR_CFG_REG1 0x4
#define TSENSOR_CFG_REG1_RSET_VBG BIT(12)
@@ -287,6 +288,9 @@ static int amlogic_thermal_probe(struct platform_device *pdev)
return ret;
}
+ if (devm_thermal_add_hwmon_sysfs(pdata->tzd))
+ dev_warn(&pdev->dev, "Failed to add hwmon sysfs attributes\n");
+
ret = amlogic_thermal_initialize(pdata);
if (ret)
return ret;
--
2.29.2
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] thermal: amlogic: Add hwmon support
2020-11-15 19:06 [PATCH] thermal: amlogic: Add hwmon support Martin Blumenstingl
@ 2020-11-16 8:35 ` Neil Armstrong
2020-11-16 9:31 ` Daniel Lezcano
1 sibling, 0 replies; 3+ messages in thread
From: Neil Armstrong @ 2020-11-16 8:35 UTC (permalink / raw)
To: Martin Blumenstingl, glaroque, linux-pm, linux-amlogic
Cc: rui.zhang, amitk, daniel.lezcano, linux-kernel
On 15/11/2020 20:06, Martin Blumenstingl wrote:
> Many monitoring tools read the CPU temperature using the hwmon
> interface. Expose the thermal sensors on Amlogic boards as hwmon
> devices.
>
> Without this lm_sensors' "sensors" tool does not find any temperature
> sensors. Now it prints:
> cpu_thermal-virtual-0
> Adapter: Virtual device
> temp1: +44.7 C (crit = +110.0 C)
>
> ddr_thermal-virtual-0
> Adapter: Virtual device
> temp1: +45.9 C (crit = +110.0 C)
>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
> drivers/thermal/amlogic_thermal.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/thermal/amlogic_thermal.c b/drivers/thermal/amlogic_thermal.c
> index ccb1fe18e993..dffe3ba8c7c4 100644
> --- a/drivers/thermal/amlogic_thermal.c
> +++ b/drivers/thermal/amlogic_thermal.c
> @@ -29,6 +29,7 @@
> #include <linux/thermal.h>
>
> #include "thermal_core.h"
> +#include "thermal_hwmon.h"
>
> #define TSENSOR_CFG_REG1 0x4
> #define TSENSOR_CFG_REG1_RSET_VBG BIT(12)
> @@ -287,6 +288,9 @@ static int amlogic_thermal_probe(struct platform_device *pdev)
> return ret;
> }l
>
> + if (devm_thermal_add_hwmon_sysfs(pdata->tzd))
> + dev_warn(&pdev->dev, "Failed to add hwmon sysfs attributes\n");
> +
> ret = amlogic_thermal_initialize(pdata);
> if (ret)
> return ret;
>
Thanks !!
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] thermal: amlogic: Add hwmon support
2020-11-15 19:06 [PATCH] thermal: amlogic: Add hwmon support Martin Blumenstingl
2020-11-16 8:35 ` Neil Armstrong
@ 2020-11-16 9:31 ` Daniel Lezcano
1 sibling, 0 replies; 3+ messages in thread
From: Daniel Lezcano @ 2020-11-16 9:31 UTC (permalink / raw)
To: Martin Blumenstingl, glaroque, linux-pm, linux-amlogic
Cc: rui.zhang, amitk, linux-kernel
On 15/11/2020 20:06, Martin Blumenstingl wrote:
> Many monitoring tools read the CPU temperature using the hwmon
> interface. Expose the thermal sensors on Amlogic boards as hwmon
> devices.
>
> Without this lm_sensors' "sensors" tool does not find any temperature
> sensors. Now it prints:
> cpu_thermal-virtual-0
> Adapter: Virtual device
> temp1: +44.7 C (crit = +110.0 C)
>
> ddr_thermal-virtual-0
> Adapter: Virtual device
> temp1: +45.9 C (crit = +110.0 C)
>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
Applied, thanks
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2020-11-16 9:31 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-11-15 19:06 [PATCH] thermal: amlogic: Add hwmon support Martin Blumenstingl
2020-11-16 8:35 ` Neil Armstrong
2020-11-16 9:31 ` Daniel Lezcano
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®