(no subject)

[>]

Changes in v2:
- Fixed commit message grammar
- Fixed subject line style as per DT convention
- Added missing reviewers/maintainers in CC

From 5c00524cbb47e30ee04223fe9502af2eb003ddf1 Mon Sep 17 00:00:00 2001
From: sanjay suthar <sanjaysuthar661996@gmail.com>
Date: Sun, 20 Jul 2025 01:11:00 +0530
Subject: [PATCH v2] dt-bindings: cleanup: fix duplicated 'is is' in YAML docs

Fix minor grammatical issues by removing duplicated "is" in two devicetree
binding documents:

- net/amlogic,meson-dwmac.yaml
- iio/dac/ti,dac7612.yaml

Signed-off-by: sanjay suthar <sanjaysuthar661996@gmail.com>
---
 Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml      | 2 +-
 Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml
index 20dd1370660d..624c640be4c8 100644
--- a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml
@@ -9,7 +9,7 @@ title: Texas Instruments DAC7612 family of DACs
 description:
   The DAC7612 is a dual, 12-bit digital-to-analog converter (DAC) with
   guaranteed 12-bit monotonicity performance over the industrial temperature
-  range. Is is programmable through an SPI interface.
+  range. It is programmable through an SPI interface.
 
 maintainers:
   - Ricardo Ribalda Delgado <ricardo@ribalda.com>
diff --git a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
index 0cd78d71768c..5c91716d1f21 100644
--- a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
@@ -149,7 +149,7 @@ properties:
       - description:
           The first register range should be the one of the DWMAC controller
       - description:
-          The second range is is for the Amlogic specific configuration
+          The second range is for the Amlogic specific configuration
           (for example the PRG_ETHERNET register range on Meson8b and newer)
 
   interrupts:
-- 
2.34.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re:

[David Lechner]

On 7/20/25 1:26 PM, > wrote:
> Changes in v2:
> - Fixed commit message grammar
> - Fixed subject line style as per DT convention
> - Added missing reviewers/maintainers in CC
> 

By placing this before the headers, our email clients think this
message doesn't have a subject. It should go after the ---.

> From 5c00524cbb47e30ee04223fe9502af2eb003ddf1 Mon Sep 17 00:00:00 2001
> From: sanjay suthar <sanjaysuthar661996@gmail.com>
> Date: Sun, 20 Jul 2025 01:11:00 +0530
> Subject: [PATCH v2] dt-bindings: cleanup: fix duplicated 'is is' in YAML docs
> 
> Fix minor grammatical issues by removing duplicated "is" in two devicetree
> binding documents:
> 
> - net/amlogic,meson-dwmac.yaml
> - iio/dac/ti,dac7612.yaml
> 
> Signed-off-by: sanjay suthar <sanjaysuthar661996@gmail.com>
> ---

This is where the changelog belongs.

>  Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml      | 2 +-
>  Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml | 2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml
> index 20dd1370660d..624c640be4c8 100644
> --- a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml
> +++ b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml
> @@ -9,7 +9,7 @@ title: Texas Instruments DAC7612 family of DACs
>  description:
>    The DAC7612 is a dual, 12-bit digital-to-analog converter (DAC) with
>    guaranteed 12-bit monotonicity performance over the industrial temperature
> -  range. Is is programmable through an SPI interface.
> +  range. It is programmable through an SPI interface.
>  
>  maintainers:
>    - Ricardo Ribalda Delgado <ricardo@ribalda.com>
> diff --git a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
> index 0cd78d71768c..5c91716d1f21 100644
> --- a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
> +++ b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
> @@ -149,7 +149,7 @@ properties:
>        - description:
>            The first register range should be the one of the DWMAC controller
>        - description:
> -          The second range is is for the Amlogic specific configuration
> +          The second range is for the Amlogic specific configuration
>            (for example the PRG_ETHERNET register range on Meson8b and newer)
>  
>    interrupts:

I would be tempted to split this into two patches. It's a bit odd to have
a single patch touching two unrelated bindings.

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re:

[Krzysztof Kozlowski]

On 20/07/2025 21:30, David Lechner wrote:
>>    - Ricardo Ribalda Delgado <ricardo@ribalda.com>
>> diff --git a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
>> index 0cd78d71768c..5c91716d1f21 100644
>> --- a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
>> +++ b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
>> @@ -149,7 +149,7 @@ properties:
>>        - description:
>>            The first register range should be the one of the DWMAC controller
>>        - description:
>> -          The second range is is for the Amlogic specific configuration
>> +          The second range is for the Amlogic specific configuration
>>            (for example the PRG_ETHERNET register range on Meson8b and newer)
>>  
>>    interrupts:
> 
> I would be tempted to split this into two patches. It's a bit odd to have


No, it's a churn to split this into more than one patch.

> a single patch touching two unrelated bindings.




Best regards,
Krzysztof

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re:

[David Lechner]

On 7/21/25 5:15 AM, Sanjay Suthar wrote:
> On Mon, Jul 21, 2025 at 12:22 PM Krzysztof Kozlowski <krzk@kernel.org <mailto:krzk@kernel.org>> wrote:
>>
>> On 20/07/2025 21:30, David Lechner wrote:
>> >>    - Ricardo Ribalda Delgado <ricardo@ribalda.com <mailto:ricardo@ribalda.com>>
>> >> diff --git a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
>> >> index 0cd78d71768c..5c91716d1f21 100644
>> >> --- a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
>> >> +++ b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
>> >> @@ -149,7 +149,7 @@ properties:
>> >>        - description:
>> >>            The first register range should be the one of the DWMAC controller
>> >>        - description:
>> >> -          The second range is is for the Amlogic specific configuration
>> >> +          The second range is for the Amlogic specific configuration
>> >>            (for example the PRG_ETHERNET register range on Meson8b and newer)
>> >>
>> >>    interrupts:
>> >
>> > I would be tempted to split this into two patches. It's a bit odd to have
>>
>>
>> No, it's a churn to split this into more than one patch.
>>
> 
> Thanks for the reply. Since there are suggestions on patch split as it is touching different subsystems, still not clear if I should split the patch or single patch is fine. I would appreciate if you can guide on the next steps to be taken
> 
> Best Regards,
> Sanjay Suthar

Krzysztof is one of the devicetree maintainers and I am not, so you
should do what Krzysztof says - leave it as one patch. :-)

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re:

[Andy Shevchenko]

On Sun, Jul 20, 2025 at 11:56:27PM +0530, > wrote:
> Changes in v2:
> - Fixed commit message grammar
> - Fixed subject line style as per DT convention
> - Added missing reviewers/maintainers in CC
> 
> From 5c00524cbb47e30ee04223fe9502af2eb003ddf1 Mon Sep 17 00:00:00 2001
> From: sanjay suthar <sanjaysuthar661996@gmail.com>
> Date: Sun, 20 Jul 2025 01:11:00 +0530
> Subject: [PATCH v2] dt-bindings: cleanup: fix duplicated 'is is' in YAML docs
> 
> Fix minor grammatical issues by removing duplicated "is" in two devicetree
> binding documents:
> 
> - net/amlogic,meson-dwmac.yaml
> - iio/dac/ti,dac7612.yaml

This mail is b0rken.

-- 
With Best Regards,
Andy Shevchenko



_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re:

[Linus Walleij]

On Wed, Feb 26, 2020 at 12:57 PM Ville Syrjälä
<ville.syrjala@linux.intel.com> wrote:
> On Tue, Feb 25, 2020 at 10:52:25PM +0100, Linus Walleij wrote:

> > I have long suspected that a whole bunch of the "simple" displays
> > are not simple but contains a display controller and memory.
> > That means that the speed over the link to the display and
> > actual refresh rate on the actual display is asymmetric because
> > well we are just updating a RAM, the resolution just limits how
> > much data we are sending, the clock limits the speed on the
> > bus over to the RAM on the other side.
>
> IMO even in command mode mode->clock should probably be the actual
> dotclock used by the display. If there's another clock for the bus
> speed/etc. it should be stored somewhere else.

Good point. For the DSI panels we have the field hs_rate
for the HS clock in struct mipi_dsi_device which is based
on exactly this reasoning. And that is what I actually use for
setting the HS clock.

The problem is however that we in many cases have so
substandard documentation of these panels that we have
absolutely no idea about the dotclock. Maybe we should
just set it to 0 in these cases?

Yours,
Linus Walleij

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re:

[Ville Syrjälä]

On Wed, Feb 26, 2020 at 01:08:06PM +0100, Linus Walleij wrote:
> On Wed, Feb 26, 2020 at 12:57 PM Ville Syrjälä
> <ville.syrjala@linux.intel.com> wrote:
> > On Tue, Feb 25, 2020 at 10:52:25PM +0100, Linus Walleij wrote:
> 
> > > I have long suspected that a whole bunch of the "simple" displays
> > > are not simple but contains a display controller and memory.
> > > That means that the speed over the link to the display and
> > > actual refresh rate on the actual display is asymmetric because
> > > well we are just updating a RAM, the resolution just limits how
> > > much data we are sending, the clock limits the speed on the
> > > bus over to the RAM on the other side.
> >
> > IMO even in command mode mode->clock should probably be the actual
> > dotclock used by the display. If there's another clock for the bus
> > speed/etc. it should be stored somewhere else.
> 
> Good point. For the DSI panels we have the field hs_rate
> for the HS clock in struct mipi_dsi_device which is based
> on exactly this reasoning. And that is what I actually use for
> setting the HS clock.
> 
> The problem is however that we in many cases have so
> substandard documentation of these panels that we have
> absolutely no idea about the dotclock. Maybe we should
> just set it to 0 in these cases?

Don't you always have a TE interrupt or something like that
available? Could just measure it from that if no better
information is available?

-- 
Ville Syrjälä
Intel

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re:

[Linus Walleij]

On Wed, Feb 26, 2020 at 3:34 PM Ville Syrjälä
<ville.syrjala@linux.intel.com> wrote:
> On Wed, Feb 26, 2020 at 01:08:06PM +0100, Linus Walleij wrote:
> > On Wed, Feb 26, 2020 at 12:57 PM Ville Syrjälä
> > <ville.syrjala@linux.intel.com> wrote:
> > > On Tue, Feb 25, 2020 at 10:52:25PM +0100, Linus Walleij wrote:
> >
> > > > I have long suspected that a whole bunch of the "simple" displays
> > > > are not simple but contains a display controller and memory.
> > > > That means that the speed over the link to the display and
> > > > actual refresh rate on the actual display is asymmetric because
> > > > well we are just updating a RAM, the resolution just limits how
> > > > much data we are sending, the clock limits the speed on the
> > > > bus over to the RAM on the other side.
> > >
> > > IMO even in command mode mode->clock should probably be the actual
> > > dotclock used by the display. If there's another clock for the bus
> > > speed/etc. it should be stored somewhere else.
> >
> > Good point. For the DSI panels we have the field hs_rate
> > for the HS clock in struct mipi_dsi_device which is based
> > on exactly this reasoning. And that is what I actually use for
> > setting the HS clock.
> >
> > The problem is however that we in many cases have so
> > substandard documentation of these panels that we have
> > absolutely no idea about the dotclock. Maybe we should
> > just set it to 0 in these cases?
>
> Don't you always have a TE interrupt or something like that
> available? Could just measure it from that if no better
> information is available?

Yes and I did exactly that, so that is why this comment is in
the driver:

static const struct drm_display_mode sony_acx424akp_cmd_mode = {
(...)
        /*
         * Some desired refresh rate, experiments at the maximum "pixel"
         * clock speed (HS clock 420 MHz) yields around 117Hz.
         */
        .vrefresh = 60,

I got a review comment at the time saying 117 Hz was weird.
We didn't reach a proper conclusion on this:
https://lore.kernel.org/dri-devel/CACRpkdYW3YNPSNMY3A44GQn8DqK-n9TLvr7uipF7LM_DHZ5=Lg@mail.gmail.com/

Thierry wasn't sure if 60Hz was good or not, so I just had to
go with something.

We could calculate the resulting pixel clock for ~117 Hz with
this resolution and put that in the clock field but ... don't know
what is the best?

Yours,
Linus Walleij

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re:

[Ville Syrjälä]

On Wed, Feb 26, 2020 at 03:56:36PM +0100, Linus Walleij wrote:
> On Wed, Feb 26, 2020 at 3:34 PM Ville Syrjälä
> <ville.syrjala@linux.intel.com> wrote:
> > On Wed, Feb 26, 2020 at 01:08:06PM +0100, Linus Walleij wrote:
> > > On Wed, Feb 26, 2020 at 12:57 PM Ville Syrjälä
> > > <ville.syrjala@linux.intel.com> wrote:
> > > > On Tue, Feb 25, 2020 at 10:52:25PM +0100, Linus Walleij wrote:
> > >
> > > > > I have long suspected that a whole bunch of the "simple" displays
> > > > > are not simple but contains a display controller and memory.
> > > > > That means that the speed over the link to the display and
> > > > > actual refresh rate on the actual display is asymmetric because
> > > > > well we are just updating a RAM, the resolution just limits how
> > > > > much data we are sending, the clock limits the speed on the
> > > > > bus over to the RAM on the other side.
> > > >
> > > > IMO even in command mode mode->clock should probably be the actual
> > > > dotclock used by the display. If there's another clock for the bus
> > > > speed/etc. it should be stored somewhere else.
> > >
> > > Good point. For the DSI panels we have the field hs_rate
> > > for the HS clock in struct mipi_dsi_device which is based
> > > on exactly this reasoning. And that is what I actually use for
> > > setting the HS clock.
> > >
> > > The problem is however that we in many cases have so
> > > substandard documentation of these panels that we have
> > > absolutely no idea about the dotclock. Maybe we should
> > > just set it to 0 in these cases?
> >
> > Don't you always have a TE interrupt or something like that
> > available? Could just measure it from that if no better
> > information is available?
> 
> Yes and I did exactly that, so that is why this comment is in
> the driver:
> 
> static const struct drm_display_mode sony_acx424akp_cmd_mode = {
> (...)
>         /*
>          * Some desired refresh rate, experiments at the maximum "pixel"
>          * clock speed (HS clock 420 MHz) yields around 117Hz.
>          */
>         .vrefresh = 60,
> 
> I got a review comment at the time saying 117 Hz was weird.
> We didn't reach a proper conclusion on this:
> https://lore.kernel.org/dri-devel/CACRpkdYW3YNPSNMY3A44GQn8DqK-n9TLvr7uipF7LM_DHZ5=Lg@mail.gmail.com/
> 
> Thierry wasn't sure if 60Hz was good or not, so I just had to
> go with something.
> 
> We could calculate the resulting pixel clock for ~117 Hz with
> this resolution and put that in the clock field but ... don't know
> what is the best?

I would vote for that approach.

-- 
Ville Syrjälä
Intel

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic