From: "Linux regression tracking (Thorsten Leemhuis)" <regressions@leemhuis.info>
To: Ulf Hansson <ulf.hansson@linaro.org>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: linux-amlogic@lists.infradead.org, linux-mmc@vger.kernel.org,
Brian Norris <briannorris@chromium.org>,
Shawn Lin <shawn.lin@rock-chips.com>, Luca Weiss <luca@z3ntu.xyz>,
Linux kernel regressions list <regressions@lists.linux.dev>,
Ziyang Huang <hzyitc@outlook.com>
Subject: Re: Odroid-C1 regression with commit 4bc31edebde5 ("mmc: core: Set HS clock speed before sending HS CMD13")
Date: Tue, 29 Aug 2023 11:59:17 +0200 [thread overview]
Message-ID: <3a6f8d86-b369-bcf7-406b-4f7d0cd5cfa3@leemhuis.info> (raw)
In-Reply-To: <CAPDyKFpAGUudAJKAmzMbcM=LrALU6ELpwaD-ijy18o7yrPgOqA@mail.gmail.com>
Hi, Thorsten here, the Linux kernel's regression tracker. Top-posting
for once, to make this easily accessible to everyone.
I still have this regression (caused by a commit from Brian, applied by
Ulf) on my list of tracked issues. Was there any progress to finally get
this fixed[1]? Doesn't look like it from here, but I might have easily
missed something, that's why I'm asking.
[1] this patch from Ziyang Huang afaics was supposed to help, but it
went nowhere afaics
https://lore.kernel.org/linux-amlogic/TYZPR01MB5556B56D834E02F41C44D81DC95FA@TYZPR01MB5556.apcprd01.prod.exchangelabs.com/
Or does anybody stop caring?
Ciao, Thorsten (wearing his 'the Linux kernel's regression tracker' hat)
--
Everything you wanna know about Linux kernel regression tracking:
https://linux-regtracking.leemhuis.info/about/#tldr
If I did something stupid, please tell me, as explained on that page.
#regzbot poke
On 20.06.23 11:53, Ulf Hansson wrote:
> On Mon, 19 Jun 2023 at 21:54, Martin Blumenstingl
> <martin.blumenstingl@googlemail.com> wrote:
>>
>> On Wed, Jun 14, 2023 at 5:49 PM Ulf Hansson <ulf.hansson@linaro.org> wrote:
>> [...]
>>>> Full register dump:
>>>> # cat /sys/kernel/debug/regmap/c1108e00.mmc/registers
>>>> 00: 00000900
>>>> 04: 0000004d
>>>> 08: e7ffe002
>>>> 0c: 02f0003f
>>>> 10: 0003f009
>>>> 14: 03b81c00
>>>> 18: 2c43bcf0
>>>> 1c: e0000150
>>>> 20: 00000000
>>>> 24: 00003067
>>>> 28: 00000000
>>>> 2c: 00000000
>>>> 30: 00000000
>>>> 34: 00fe0cff
>>>> 38: 0000100b
>>>>
>>>> In case you are curious, the driver is: drivers/mmc/host/meson-mx-sdhc-mmc.c
>>>
>>> Thanks for sharing this data!
>>>
>>> I assume the above registers indicate that we have sent the command
>>> and are now waiting for an IRQ for a response/error, but we never
>>> receive one.
>>>
>>> To really figure out what is going on, I think we need to do some
>>> additional low level debugging/testing.
>>>
>>> I was looking at the commit message from e4bf1b0970ef ("mmc: host:
>>> meson-mx-sdhc: new driver for the Amlogic Meson SDHC host"), which
>>> indicates that the clock management is quite limited for this HW. For
>>> example, the 51000000Hz isn't one of the supported frequencies. Could
>>> that be the reason for the problem? Perhaps if we play with changing
>>> the frequency to something that is considered supported - then can we
>>> make this work?
>> You seem to be more familiar with this Amlogic MMC controller than I am ;-)
>
> Sometimes a well written commit message actually helps. :-)
>
>> Today I finally had some time for testing and when I started Ziyang
>> Huang provided a patch [0] (admittedly: I think it needs to be
>> improved, but finally we know that it's a MMC controller driver
>> limitation and not an MMC core bug)
>
> Great news!
>
> I will continue to monitor the thread and defer to apply anything
> until you have given it your blessing, of course.
>
> Kind regards
> Uffe
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2023-08-29 9:59 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-10 23:13 Martin Blumenstingl
2023-04-13 14:00 ` Linux regression tracking (Thorsten Leemhuis)
2023-05-08 20:12 ` Martin Blumenstingl
2023-05-10 14:20 ` Ulf Hansson
2023-05-10 20:54 ` Martin Blumenstingl
2023-05-11 10:42 ` Ulf Hansson
2023-05-14 20:42 ` Martin Blumenstingl
2023-05-15 9:43 ` Ulf Hansson
2023-05-16 20:45 ` Martin Blumenstingl
2023-06-02 13:17 ` Linux regression tracking (Thorsten Leemhuis)
2023-06-05 21:01 ` Martin Blumenstingl
2023-06-14 15:49 ` Ulf Hansson
2023-06-19 19:54 ` Martin Blumenstingl
2023-06-20 9:53 ` Ulf Hansson
2023-08-29 9:59 ` Linux regression tracking (Thorsten Leemhuis) [this message]
2023-09-11 8:48 ` Thorsten Leemhuis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3a6f8d86-b369-bcf7-406b-4f7d0cd5cfa3@leemhuis.info \
--to=regressions@leemhuis.info \
--cc=briannorris@chromium.org \
--cc=hzyitc@outlook.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-mmc@vger.kernel.org \
--cc=luca@z3ntu.xyz \
--cc=martin.blumenstingl@googlemail.com \
--cc=regressions@lists.linux.dev \
--cc=shawn.lin@rock-chips.com \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®