From: Neil Armstrong <neil.armstrong@linaro.org>
To: chuan.liu@amlogic.com, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Kevin Hilman <khilman@baylibre.com>,
Jerome Brunet <jbrunet@baylibre.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 00/12] soc: amlogic: clk-measure: Add support for more SoCs
Date: Wed, 30 Sep 2026 15:22:40 +0200 [thread overview]
Message-ID: <a51f9814-fe65-4a2c-92df-cbc3f00036fc@linaro.org> (raw)
In-Reply-To: <20260920-more-socs-to-support-clk_measure-v2-0-224382a429e8@amlogic.com>
On 9/20/26 12:25, Chuan Liu via B4 Relay wrote:
> This patch series adds clk-measure support for the Amlogic A5, A4, S7,
> S7D, S6 and A9 SoCs, listed in the order of their release.
>
> The clock names for the clk-measure channels are kept consistent with
> those used by the clock driver as much as possible, making it easier to
> identify the relationship between the clk-measure channels and the
> corresponding clocks in the clock driver.
>
> This patchset also includes an additional patch to optimize memory usage:
> - soc: amlogic: clk-measure: Optimize CLK_MSR_ID to reduce memory usage
>
> To avoid requiring everyone to spend additional effort on a separate
> patchset, I have included it in this series. Please feel free to point
> out if this is not appropriate for this series.
>
> To improve maintainability, this patchset also includes a patch to reorder
> the dt-binding and the compatible entries in the driver.
>
> To minimize unrelated changes, the existing clk-measure channel tables in
> the driver are left in their original order. The tables for the newly
> supported SoCs are ordered alphabetically.
>
> Signed-off-by: Chuan Liu <chuan.liu@amlogic.com>
> ---
> Changes in v2:
> - Reorder the dt-binding and the compatible entries in the driver
> alphabetically.
> - Order the clk-measure channel tables for the newly supported SoCs
> alphabetically.
> - Add the const qualifier to the A9 clk-measure channel table.
> - Rename "exit_Tsin_B_CLK_IN" to "ext_Tsin_B_CLK_IN" in the A9 clk-measure
> channel table.
> - Link to v1: https://lore.kernel.org/r/20260911-more-socs-to-support-clk_measure-v1-0-940e269aa52f@amlogic.com
>
> ---
> Chuan Liu (12):
> dt-bindings: soc: amlogic: Reordering compatible of clk-measure
> dt-bindings: soc: amlogic: Add clk-measure compatible to support more SoCs
> soc: amlogic: clk-measure: Support more measurement channels
> soc: amlogic: clk-measure: Align compatible entries with DT bindings
> soc: amlogic: clk-measure: Add support for more SoCs
> soc: amlogic: clk-measure: Optimize CLK_MSR_ID to reduce memory usage
> arm64: dts: amlogic: a5: Add clk-measure controller node
> arm64: dts: amlogic: a4: Add clk-measure controller node
> arm64: dts: amlogic: s7: Add clk-measure controller node
> arm64: dts: amlogic: s7d: Add clk-measure controller node
> arm64: dts: amlogic: s6: Add clk-measure controller node
> arm64: dts: amlogic: a9: Add clk-measure controller node
>
> .../soc/amlogic/amlogic,meson-gx-clk-measure.yaml | 16 +-
> arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi | 5 +
> arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi | 5 +
> arch/arm64/boot/dts/amlogic/amlogic-a9.dtsi | 5 +
> arch/arm64/boot/dts/amlogic/amlogic-s6.dtsi | 5 +
> arch/arm64/boot/dts/amlogic/amlogic-s7.dtsi | 5 +
> arch/arm64/boot/dts/amlogic/amlogic-s7d.dtsi | 5 +
> drivers/soc/amlogic/meson-clk-measure.c | 927 ++++++++++++++++++++-
> 8 files changed, 953 insertions(+), 20 deletions(-)
> ---
> base-commit: a2530c83c458a503e55219966217dfd1c36a385e
> change-id: 20260710-more-socs-to-support-clk_measure-c826f8ab9e68
>
> Best regards,
For the whole serie:
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Thanks,
Neil
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
prev parent reply other threads:[~2026-09-30 13:23 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-20 10:25 Chuan Liu via B4 Relay
2026-09-20 10:25 ` [PATCH v2 01/12] dt-bindings: soc: amlogic: Reordering compatible of clk-measure Chuan Liu via B4 Relay
2026-09-24 12:56 ` Krzysztof Kozlowski
2026-09-20 10:25 ` [PATCH v2 02/12] dt-bindings: soc: amlogic: Add clk-measure compatible to support more SoCs Chuan Liu via B4 Relay
2026-09-24 12:57 ` Krzysztof Kozlowski
2026-09-20 10:25 ` [PATCH v2 03/12] soc: amlogic: clk-measure: Support more measurement channels Chuan Liu via B4 Relay
2026-09-20 10:25 ` [PATCH v2 04/12] soc: amlogic: clk-measure: Align compatible entries with DT bindings Chuan Liu via B4 Relay
2026-09-20 10:25 ` [PATCH v2 05/12] soc: amlogic: clk-measure: Add support for more SoCs Chuan Liu via B4 Relay
2026-09-20 10:25 ` [PATCH v2 06/12] soc: amlogic: clk-measure: Optimize CLK_MSR_ID to reduce memory usage Chuan Liu via B4 Relay
2026-09-20 10:25 ` [PATCH v2 07/12] arm64: dts: amlogic: a5: Add clk-measure controller node Chuan Liu via B4 Relay
2026-09-20 10:25 ` [PATCH v2 08/12] arm64: dts: amlogic: a4: " Chuan Liu via B4 Relay
2026-09-20 10:25 ` [PATCH v2 09/12] arm64: dts: amlogic: s7: " Chuan Liu via B4 Relay
2026-09-20 10:25 ` [PATCH v2 10/12] arm64: dts: amlogic: s7d: " Chuan Liu via B4 Relay
2026-09-20 10:25 ` [PATCH v2 11/12] arm64: dts: amlogic: s6: " Chuan Liu via B4 Relay
2026-09-20 10:25 ` [PATCH v2 12/12] arm64: dts: amlogic: a9: " Chuan Liu via B4 Relay
2026-09-30 13:22 ` Neil Armstrong [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a51f9814-fe65-4a2c-92df-cbc3f00036fc@linaro.org \
--to=neil.armstrong@linaro.org \
--cc=chuan.liu@amlogic.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jbrunet@baylibre.com \
--cc=khilman@baylibre.com \
--cc=krzk+dt@kernel.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=martin.blumenstingl@googlemail.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®