[PATCH v4 0/2] clk: meson-g12a: Add EE clock controller driver

[jian.hu@amlogic.com (Jian Hu)]

Hi Jerome

On 2018/11/8 21:34, jbrunet at baylibre.com wrote:
> On Thu, 2018-11-08 at 21:15 +0800, Jian Hu wrote:
>> Changes since v3 at[4]
>> -add fixed clocks clk_regmap definition
> 
> Jian,
> 
> When replying to the v1 of your clk_ao patchset :
> https://patchwork.kernel.org/patch/10562563/#22177627
> 
> I have explained that I would like to stop taking clock (such as xtal) from
> nowhere. Clocks (even the xtal) should be properly claimed through DT.
> I have specifically asked this to be taken into account for the EE controller.
> 
> If you need an exemple on how to get the input clock from DT to your
> controller, please have look at the axg audio clock controller.
> 
> This comment does not appear to be addressed in this version.
> Please make sure you have addressed all the comments of past reviews before
> reposting
> 
> Thx
> 

Thanks, I will resolve it, I want make sure for it.

I should take the "periphs_xtal" clock in ee g12a clock controller 
driver through DT , And then I can get its clock name "xtal" by property
of clock-output-names. Is that right?

ee g12a clock dts:

		hiubus: bus at ff63c000 {
			compatible = "simple-bus";
			reg = <0x0 0xff63c000 0x0 0x1c00>;
			#address-cells = <2>;
			#size-cells = <2>;
			ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>;

			sysctrl: syscon at 0 {
                                compatible = 
"amlogic,meson-g12a-hhi-sysctrl", "simple-mfd", "syscon";
				reg = <0x0 0x0 0x0 0x400>;

				clkc: clock-controller {
					compatible = "amlogic,g12a-clkc";
					#clock-cells = <1>;
					clocks = <&xtal>;
					clock-name = "periphs_xtal";
				};
			};
		};


		xtal: xtal-clk {
			compatible = "fixed-clock";
			clock-frequency = <24000000>;
			clock-output-names = "xtal"; 
 

			#clock-cells = <0>;
		};
>>
>> Changes since v2 at[2]
>> -fix fixed clocks's descriptions
>> -fix aligment
>> -add enable bit for plls base on [3] patches
>> -add fixed clock gate bit
>>
>> Changes since v1 at[1]
>> -fix typo of 'Everything'.
>> -change the word 'AmLogic' to 'Amlogic'
>> -squash patch 1 and 2.
>> -delete usless message of "Trying obsolete regs".
>> -delete the empty line in include/dt-bindings/clock/g12a-clkc.h.
>> -rebase on top of the "next/drivers" branch, and add g12a clock patch.
>> -add CLK_MUX_ROUND_CLOSEST for g12a_sd_emmc_b_clk0_sel and
>>   g12a_sd_emmc_c_clk0_sel.
>>
>> [1]
>> https://lkml.kernel.org/r/1531133549-25806-2-git-send-email-jian.hu at amlogic.com
>> [2]
>> https://lkml.kernel.org/r/1531728707-192230-2-git-send-email-jian.hu at amlogic.com
>> [3]https://lkml.kernel.org/r/20180717095617.12240-1-jbrunet at baylibre.com
>> [4]
>> https://lkml.kernel.org/r/1533890858-113020-1-git-send-email-jian.hu at amlogic.com
>>
>> Jian Hu (2):
>>    dt-bindings: clk: meson-g12a: Add G12A EE Clock Bindings
>>    clk: meson-g12a: Add EE Clock controller driver
>>
>>   .../bindings/clock/amlogic,gxbb-clkc.txt           |    1 +
>>   drivers/clk/meson/Kconfig                          |   10 +
>>   drivers/clk/meson/Makefile                         |    1 +
>>   drivers/clk/meson/g12a.c                           | 1134
>> ++++++++++++++++++++
>>   drivers/clk/meson/g12a.h                           |  128 +++
>>   include/dt-bindings/clock/g12a-clkc.h              |   93 ++
>>   6 files changed, 1367 insertions(+)
>>   create mode 100644 drivers/clk/meson/g12a.c
>>   create mode 100644 drivers/clk/meson/g12a.h
>>   create mode 100644 include/dt-bindings/clock/g12a-clkc.h
>>
> 
> 
> .
>