[v7 0/4] Add Magicbox M16S support

[v7 0/4] Add Magicbox M16S support

[Zhang Ning]

these patches aim to add MagicBox M16S support.

MagicBox M16S is populor Tv box in China, manufacted by Alibaba at 2016,
with below spec:

Amlogic S912-H (S912 with dolby and dts)
2G ddr3
16G emmc
Marvell sd8897 BT/wifi module
100M ethernet
IR receiver
4K HDMI
AV out
Rest hole
5V2A power input
white LED

current status with these patches:
HDMI sound and AV out status unknown, others work well.
Wifi/Bt work without DT support.
LED pin is GPIO_TEST_N. Depends on Neil's patch. 

previouse patchs:
v1: http://lists.infradead.org/pipermail/linux-amlogic/2022-July/013022.html
v2: http://lists.infradead.org/pipermail/linux-amlogic/2022-July/013051.html
v3: http://lists.infradead.org/pipermail/linux-amlogic/2022-July/013054.html
v4: http://lists.infradead.org/pipermail/linux-amlogic/2022-July/013060.html
v5: http://lists.infradead.org/pipermail/linux-amlogic/2022-July/013067.html
v6: http://lists.infradead.org/pipermail/linux-amlogic/2022-July/013094.html

Changes since v6:
add Sean's Signed-off-by
checkpatch error: typo and tab fix  and no error reported.
add manufactor bindings and change device bindings string to
tmall,magicbox-m16s, suggested by Christian Hewitt and checkpatch.

Changes since v5:
update keymap bindings patch title, and commit msg.
fix swapped volume up/down key, find out by my wife.
move rc "M" key description from git log to code.
update board binding patch title.
update gpio key name.
remove gpio-keys address-cells and size-cells, which should be done in
v4.
add 1 blank line before ethmac.
make phandle in alphabet order.

Changes since v4:
fix typo in commit msg
remove useless blank line

Changes since v3:
split dt bindings to new patches.
change keymap scancode to hex.
move dts changes to single patch.
update commit msg.

Changes since V2:
add IR keymap.
update patch title.


Zhang Ning (4):
  dt-bindings: media: rc: add keymap bindings for MagicBox M16S remote
  media: rc: add keymap for MagicBox M16S remote
  dt-bindings: arm: amlogic: add MagicBox M16S bindings
  arm64: dts: meson: Add MagicBox M16S support

 .../devicetree/bindings/arm/amlogic.yaml      |  1 +
 .../devicetree/bindings/media/rc.yaml         |  1 +
 .../devicetree/bindings/vendor-prefixes.yaml  |  2 +
 arch/arm64/boot/dts/amlogic/Makefile          |  1 +
 .../dts/amlogic/meson-gxm-magicbox-m16s.dts   | 39 +++++++++++++
 drivers/media/rc/keymaps/Makefile             |  1 +
 drivers/media/rc/keymaps/rc-magicbox.c        | 58 +++++++++++++++++++
 include/media/rc-map.h                        |  1 +
 8 files changed, 104 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts
 create mode 100644 drivers/media/rc/keymaps/rc-magicbox.c

-- 
2.35.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic