mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* Dual es1371 SB cards, unable to get 2nd card to work
@ 2004-02-12 11:40 Peter Illmayer
  0 siblings, 0 replies; only message in thread
From: Peter Illmayer @ 2004-02-12 11:40 UTC (permalink / raw)
  To: linux-kernel

Hello

I am unable to get the 2nd soundcard in my server to work.  I have read
as many threads as I can and am stumped. Any guidance would sincerely be
appreciated, I want to learn ! The first soundcard continues to work
fine.....

Configuration Information is as follow:
------------------------------------------------------------------------
-----------------------------
Kernel: 2.4.20-8smp (Redhat 9.0)

PCI devices: ie: lspci -v

00:08.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02)
        Subsystem: Ensoniq Creative SoundBlaster AudioPCI 128
        Flags: bus master, slow devsel, latency 104, IRQ 5
        I/O ports at 7800 [size=64]
        Capabilities: [dc] Power Management version 1

00:0a.0 Multimedia audio controller: Creative Labs ES1371
        Subsystem: Creative Labs: Unknown device 5938
        Flags: bus master, slow devsel, latency 104, IRQ 15
        I/O ports at 7840 [size=64]
        I/O ports at 7880 [size=32]
        Capabilities: [dc] Power Management version 2

Lsmod shows:
[root@server root]# lsmod
Module                  Size  Used by    Not tainted
es1371                 34920   0  (autoclean)
gameport                3508   0  (autoclean) [es1371]
ac97_codec             13768   0  (autoclean) [es1371]
soundcore               7044   8  (autoclean) [es1371]

I have created the following devices via the command

Mknod /dev/dsp2 c 14 35
Mknod /dev/dsp3 c 14 51

[root@server dev]# ls -al dsp*
crw-------    1 root     root      14,   3 Jan 30  2003 dsp
crw-------    1 root     root      14,  19 Jan 30  2003 dsp1
crw-------    1 root     root      14,  35 Feb 11 20:11 dsp2
crw-------    1 root     root      14,  51 Feb  9 21:35 dsp3
crw-------    1 root     root      14,  67 Feb  9 21:31 dsp4

I have added the following lines to /etc/modules.conf:

alias sound-slot-0 es1371
post-install sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -L
>/dev/null 2>&1 || :
pre-remove sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -S
>/dev/null 2>&1 || :

alias sound-slot-2 es1371
post-install sound-slot-2 /bin/aumix-minimal -f /etc/.aumixrc1 -L
>/dev/null 2>&1 || :
pre-remove sound-slot-2 /bin/aumix-minimal -f /etc/.aumixrc1 -S
>/dev/null 2>&1 || :

------------------------------------------------------------------------
------------------------------

I am unable to play a wav file when doing:

Play -d /dev/dsp2 blah.wav , the machine sits there for the correct time
however no audio

Performing a dd to /dev/dsp, I get the following:


[root@server dev]# dd if=/dev/dsp2 | od -i
0000000  30840  30840  30840  30840  30840  30840  30840  30840
*
58+0 records in
58+0 records out

[root@server dev]

I have read the thread
http://www.ussg.iu.edu/hypermail/linux/kernel/0010.2/1137.html and tried
all of the suggestions however it doesn't work.  I apologise if this is
a lame question however I cant seem to get my head around it.

Many thanks in anticipation !

Peter....vk2yx






^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2004-02-12 11:40 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2004-02-12 11:40 Dual es1371 SB cards, unable to get 2nd card to work Peter Illmayer

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®