* [PATCH v4 2/2] therma: exynos: Supports thermal tripping
@ 2012-11-26 1:31 Jonghwan Choi
2012-11-28 11:21 ` Amit Kachhap
0 siblings, 1 reply; 2+ messages in thread
From: Jonghwan Choi @ 2012-11-26 1:31 UTC (permalink / raw)
To: 'Jonghwan Choi', 'open list'
Cc: 'Amit Daniel Kachhap', 'Zhang Rui',
'Sachin Kamat'
TMU urgently sends active-high signal (thermal trip) to PMU,
and thermal tripping by hardware logic i.e PMU is performed.
Thermal tripping means that PMU cut off the whole power of SoC
by controlling external voltage regulator.
Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com>
---
drivers/thermal/exynos_thermal.c | 21 +++++++++++++++++----
1 files changed, 17 insertions(+), 4 deletions(-)
diff --git a/drivers/thermal/exynos_thermal.c
b/drivers/thermal/exynos_thermal.c
index 129e827..f0ce099 100644
--- a/drivers/thermal/exynos_thermal.c
+++ b/drivers/thermal/exynos_thermal.c
@@ -631,6 +631,12 @@ static int exynos_tmu_initialize(struct platform_device
*pdev)
goto out;
}
rising_threshold |= (threshold_code << 16);
+ threshold_code = temp_to_code(data,
pdata->trigger_levels[3]);
+ if (threshold_code < 0) {
+ ret = threshold_code;
+ goto out;
+ }
+ rising_threshold |= (threshold_code << 24);
writel(rising_threshold,
data->base + EXYNOS_THD_TEMP_RISE);
@@ -669,10 +675,14 @@ static void exynos_tmu_control(struct platform_device
*pdev, bool on)
if (on) {
con |= EXYNOS_TMU_CORE_ON;
- interrupt_en = pdata->trigger_level3_en << 12 |
- pdata->trigger_level2_en << 8 |
+ interrupt_en = pdata->trigger_level2_en << 8 |
pdata->trigger_level1_en << 4 |
pdata->trigger_level0_en;
+
+ if (data->soc == SOC_ARCH_EXYNOS4210)
+ interrupt_en |= pdata->trigger_level3_en << 12;
+ else
+ con |= pdata->trigger_level3_en << 12;
} else {
interrupt_en = 0; /* Disable all interrupts */
}
@@ -770,6 +780,7 @@ static struct exynos_tmu_platform_data const
exynos_default_tmu_data = {
.trigger_levels[0] = 85,
.trigger_levels[1] = 103,
.trigger_levels[2] = 110,
+ .trigger_levels[3] = 120,
.trigger_level0_en = 1,
.trigger_level1_en = 1,
.trigger_level2_en = 1,
@@ -917,8 +928,10 @@ static int __devinit exynos_tmu_probe(struct
platform_device *pdev)
/* Register the sensor with thermal management interface */
(&exynos_sensor_conf)->private_data = data;
exynos_sensor_conf.trip_data.trip_count = pdata->trigger_level0_en +
- pdata->trigger_level1_en + pdata->trigger_level2_en
+
- pdata->trigger_level3_en;
+ pdata->trigger_level1_en + pdata->trigger_level2_en;
+
+ if (data->soc == SOC_ARCH_EXYNOS4210)
+ exynos_sensor_conf.trip_data.trip_count +=
pdata->trigger_level3_en;
for (i = 0; i < exynos_sensor_conf.trip_data.trip_count; i++)
exynos_sensor_conf.trip_data.trip_val[i] =
--
1.7.4.1
^ permalink raw reply [flat|nested] 2+ messages in thread* Re: [PATCH v4 2/2] therma: exynos: Supports thermal tripping
2012-11-26 1:31 [PATCH v4 2/2] therma: exynos: Supports thermal tripping Jonghwan Choi
@ 2012-11-28 11:21 ` Amit Kachhap
0 siblings, 0 replies; 2+ messages in thread
From: Amit Kachhap @ 2012-11-28 11:21 UTC (permalink / raw)
To: Jonghwan Choi; +Cc: open list, Zhang Rui, Sachin Kamat
On 26 November 2012 07:01, Jonghwan Choi <jhbird.choi@samsung.com> wrote:
> TMU urgently sends active-high signal (thermal trip) to PMU,
> and thermal tripping by hardware logic i.e PMU is performed.
> Thermal tripping means that PMU cut off the whole power of SoC
> by controlling external voltage regulator.
>
> Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com>
> ---
> drivers/thermal/exynos_thermal.c | 21 +++++++++++++++++----
> 1 files changed, 17 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/thermal/exynos_thermal.c
> b/drivers/thermal/exynos_thermal.c
> index 129e827..f0ce099 100644
> --- a/drivers/thermal/exynos_thermal.c
> +++ b/drivers/thermal/exynos_thermal.c
> @@ -631,6 +631,12 @@ static int exynos_tmu_initialize(struct platform_device
> *pdev)
> goto out;
> }
> rising_threshold |= (threshold_code << 16);
> + threshold_code = temp_to_code(data,
> pdata->trigger_levels[3]);
> + if (threshold_code < 0) {
> + ret = threshold_code;
> + goto out;
> + }
> + rising_threshold |= (threshold_code << 24);
>
> writel(rising_threshold,
> data->base + EXYNOS_THD_TEMP_RISE);
> @@ -669,10 +675,14 @@ static void exynos_tmu_control(struct platform_device
> *pdev, bool on)
>
> if (on) {
> con |= EXYNOS_TMU_CORE_ON;
> - interrupt_en = pdata->trigger_level3_en << 12 |
> - pdata->trigger_level2_en << 8 |
> + interrupt_en = pdata->trigger_level2_en << 8 |
> pdata->trigger_level1_en << 4 |
> pdata->trigger_level0_en;
> +
> + if (data->soc == SOC_ARCH_EXYNOS4210)
> + interrupt_en |= pdata->trigger_level3_en << 12;
> + else
> + con |= pdata->trigger_level3_en << 12;
> } else {
> interrupt_en = 0; /* Disable all interrupts */
> }
> @@ -770,6 +780,7 @@ static struct exynos_tmu_platform_data const
> exynos_default_tmu_data = {
> .trigger_levels[0] = 85,
> .trigger_levels[1] = 103,
> .trigger_levels[2] = 110,
> + .trigger_levels[3] = 120,
> .trigger_level0_en = 1,
> .trigger_level1_en = 1,
> .trigger_level2_en = 1,
> @@ -917,8 +928,10 @@ static int __devinit exynos_tmu_probe(struct
> platform_device *pdev)
> /* Register the sensor with thermal management interface */
> (&exynos_sensor_conf)->private_data = data;
> exynos_sensor_conf.trip_data.trip_count = pdata->trigger_level0_en +
> - pdata->trigger_level1_en + pdata->trigger_level2_en
> +
> - pdata->trigger_level3_en;
> + pdata->trigger_level1_en + pdata->trigger_level2_en;
> +
> + if (data->soc == SOC_ARCH_EXYNOS4210)
> + exynos_sensor_conf.trip_data.trip_count +=
> pdata->trigger_level3_en;
Hi Choi,
Your changes looks fine but I guess we are changing a common code. I
(Along with jonghwa3.lee@samsung.com ) have submitted a patchset
which will simplify this and now this 4th trip point code addition for
exynos4210 will be mostly platform data addition, So let Zhang Ru
comment on my changes because this will cause merge conflict.
Thanks,
Amit D
>
> for (i = 0; i < exynos_sensor_conf.trip_data.trip_count; i++)
> exynos_sensor_conf.trip_data.trip_val[i] =
> --
> 1.7.4.1
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2012-11-28 11:21 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-11-26 1:31 [PATCH v4 2/2] therma: exynos: Supports thermal tripping Jonghwan Choi
2012-11-28 11:21 ` Amit Kachhap
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®