From: "Takashi Sato" <sho@tnes.nec.co.jp>
To: <shaggy@austin.ibm.com>
Cc: <linux-kernel@vger.kernel.org>, <linux-fsdevel@vger.kernel.org>
Subject: Re: stat64 for over 2TB file returned invalid st_blocks
Date: Tue, 6 Dec 2005 21:42:37 +0900 [thread overview]
Message-ID: <000301c5fa62$8d1bb730$4168010a@bsd.tnes.nec.co.jp> (raw)
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 5424 bytes --]
Hi,
> > >> 2. Change the type of architecture dependent stat64.st_blocks in
> > >> include/asm/asm-*/stat.h from unsigned long to unsigned long long.
> > >> I tried modifying only stat64 of 32bit architecture
> > >> (include/asm-i386/stat.h).
> > >
> > >This changes the API, but the structure does suggest that the 4-byte pad
> > >should be used for the high-order bytes of st_blocks, so that's not
> > >really a problem. A correct fix would replace __pad4 with
> > >st_blocks_high (or something like that) and ensure that the high-order
> > >word was stored there. Your proposed fix would only be correct on
> > >little-endian hardware, as Jörn pointed out.
> >
> > Thank you for your advice. I'll research for glibc and consider
> > how to implement.
> > By the way I think, as Avi Kivity said, it's always little-endian on i386,
> > is it correct?
>
> That's true. The patch does fix i386 without any bad side-effects. A
> generic fix that would fix all architectures would be a little more
> complicated, since the size of st_blocks varies. 32-bit big-endian
> would have to explicitly copy the high and low words. (The first time I
> looked at this, I ignored the fact that the change was in asm-i386.)
I realized some 32-bit big-endian architectures such as sh and m68k
have a padding before 32-bit st_blocks, though mips and ppc have
64-bit st_blocks.
- asm-sh
#if defined(__BIG_ENDIAN__)
unsigned long __pad4; /* Future possible st_blocks hi bits */
unsigned long st_blocks; /* Number 512-byte blocks allocated. */
#else /* Must be little */
unsigned long st_blocks; /* Number 512-byte blocks allocated. */
unsigned long __pad4; /* Future possible st_blocks hi bits */
#endif
- asm-m68k
unsigned long __pad4; /* future possible st_blocks high bits */
unsigned long st_blocks; /* Number 512-byte blocks allocated. */
So I updated the patch. Any feedback and comments are welcome.
Signed-off-by: Takashi Sato <sho@tnes.nec.co.jp>
Signed-off-by: ASANO Masahiro <masano@tnes.nec.co.jp>
diff -uprN -X linux-2.6.15-rc5.org/Documentation/dontdiff linux-2.6.15-rc5.org/include/asm-i386/stat.h
linux-2.6.15-rc5-blocks/include/asm-i386/stat.h
--- linux-2.6.15-rc5.org/include/asm-i386/stat.h 2005-10-28 09:02:08.000000000 +0900
+++ linux-2.6.15-rc5-blocks/include/asm-i386/stat.h 2005-12-06 16:24:31.000000000 +0900
@@ -58,8 +58,7 @@ struct stat64 {
long long st_size;
unsigned long st_blksize;
- unsigned long st_blocks; /* Number 512-byte blocks allocated. */
- unsigned long __pad4; /* future possible st_blocks high bits */
+ unsigned long long st_blocks; /* Number 512-byte blocks allocated. */
unsigned long st_atime;
unsigned long st_atime_nsec;
diff -uprN -X linux-2.6.15-rc5.org/Documentation/dontdiff linux-2.6.15-rc5.org/include/asm-m68k/stat.h
linux-2.6.15-rc5-blocks/include/asm-m68k/stat.h
--- linux-2.6.15-rc5.org/include/asm-m68k/stat.h 2005-10-28 09:02:08.000000000 +0900
+++ linux-2.6.15-rc5-blocks/include/asm-m68k/stat.h 2005-12-06 16:29:50.000000000 +0900
@@ -60,8 +60,7 @@ struct stat64 {
long long st_size;
unsigned long st_blksize;
- unsigned long __pad4; /* future possible st_blocks high bits */
- unsigned long st_blocks; /* Number 512-byte blocks allocated. */
+ unsigned long long st_blocks; /* Number 512-byte blocks allocated. */
unsigned long st_atime;
unsigned long st_atime_nsec;
diff -uprN -X linux-2.6.15-rc5.org/Documentation/dontdiff linux-2.6.15-rc5.org/include/asm-sh/stat.h
linux-2.6.15-rc5-blocks/include/asm-sh/stat.h
--- linux-2.6.15-rc5.org/include/asm-sh/stat.h 2005-10-28 09:02:08.000000000 +0900
+++ linux-2.6.15-rc5-blocks/include/asm-sh/stat.h 2005-12-06 16:28:37.000000000 +0900
@@ -60,13 +60,7 @@ struct stat64 {
long long st_size;
unsigned long st_blksize;
-#if defined(__BIG_ENDIAN__)
- unsigned long __pad4; /* Future possible st_blocks hi bits */
- unsigned long st_blocks; /* Number 512-byte blocks allocated. */
-#else /* Must be little */
- unsigned long st_blocks; /* Number 512-byte blocks allocated. */
- unsigned long __pad4; /* Future possible st_blocks hi bits */
-#endif
+ unsigned long long st_blocks; /* Number 512-byte blocks allocated. */
unsigned long st_atime;
unsigned long st_atime_nsec;
diff -uprN -X linux-2.6.15-rc5.org/Documentation/dontdiff linux-2.6.15-rc5.org/include/linux/fs.h
linux-2.6.15-rc5-blocks/include/linux/fs.h
--- linux-2.6.15-rc5.org/include/linux/fs.h 2005-12-06 16:20:21.000000000 +0900
+++ linux-2.6.15-rc5-blocks/include/linux/fs.h 2005-12-06 16:26:01.000000000 +0900
@@ -450,7 +450,7 @@ struct inode {
unsigned int i_blkbits;
unsigned long i_blksize;
unsigned long i_version;
- unsigned long i_blocks;
+ unsigned long long i_blocks;
unsigned short i_bytes;
spinlock_t i_lock; /* i_blocks, i_bytes, maybe i_size */
struct semaphore i_sem;
diff -uprN -X linux-2.6.15-rc5.org/Documentation/dontdiff linux-2.6.15-rc5.org/include/linux/stat.h
linux-2.6.15-rc5-blocks/include/linux/stat.h
--- linux-2.6.15-rc5.org/include/linux/stat.h 2005-10-28 09:02:08.000000000 +0900
+++ linux-2.6.15-rc5-blocks/include/linux/stat.h 2005-12-06 16:26:26.000000000 +0900
@@ -69,7 +69,7 @@ struct kstat {
struct timespec mtime;
struct timespec ctime;
unsigned long blksize;
- unsigned long blocks;
+ unsigned long long blocks;
};
#endif
-- Takashi Sato
next reply other threads:[~2005-12-06 12:42 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-12-06 12:42 Takashi Sato [this message]
2005-12-06 14:30 ` Dave Kleikamp
2005-12-06 14:48 ` Trond Myklebust
2005-12-06 14:51 ` Dave Kleikamp
2005-12-06 21:24 ` Andreas Dilger
2005-12-07 0:59 ` Trond Myklebust
2005-12-07 10:57 ` Takashi Sato
2005-12-07 13:52 ` Trond Myklebust
2005-12-07 15:01 ` Dave Kleikamp
2005-12-07 15:34 ` Trond Myklebust
2005-12-07 16:34 ` Dave Kleikamp
2005-12-07 18:55 ` Trond Myklebust
2005-12-08 11:38 ` Takashi Sato
2005-12-08 14:27 ` Trond Myklebust
2005-12-08 14:50 ` Anton Altaparmakov
2005-12-08 15:03 ` Trond Myklebust
2005-12-10 11:22 ` Takashi Sato
[not found] <5eVqw-2ug-61@gated-at.bofh.it>
2005-12-03 2:19 ` Bodo Eggert
-- strict thread matches above, loose matches on Subject: below --
2005-12-01 12:00 Takashi Sato
2005-12-01 12:39 ` Jörn Engel
2005-12-01 12:52 ` Jörn Engel
2005-12-01 13:52 ` Avi Kivity
2005-12-01 14:32 ` Dave Kleikamp
2005-12-02 13:18 ` Takashi Sato
2005-12-02 14:11 ` Dave Kleikamp
2005-12-02 18:58 ` Andreas Dilger
2005-12-03 13:00 ` Takashi Sato
2005-12-05 8:11 ` Andreas Dilger
2005-12-05 12:35 ` Takashi Sato
2005-12-05 13:34 ` Trond Myklebust
2005-12-01 14:53 ` Al Viro
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='000301c5fa62$8d1bb730$4168010a@bsd.tnes.nec.co.jp' \
--to=sho@tnes.nec.co.jp \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=shaggy@austin.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®