mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH] backlight-lm3630-apply chip revision
@ 2013-07-19 10:49 daniel jeong
  2013-07-19 10:49 ` daniel jeong
  0 siblings, 1 reply; 3+ messages in thread
From: daniel jeong @ 2013-07-19 10:49 UTC (permalink / raw)
  To: Richard Purdie, Jingoo Han; +Cc: Daniel Jeong, Andrew Morton, linux-kernel

@chip revision
The TI LM3630 chip was revised and chip name was also changed to LM3630A.
And register map, default values and initial sequences are changed.
www.ti.com

Signed-off-by: daniel jeong <daniel.jeong@ti.com>
---
 drivers/video/backlight/Kconfig         |    4 +-
 drivers/video/backlight/lm3630_bl.c     |  491 ++++++++++++++++---------------
 include/linux/platform_data/lm3630_bl.h |   68 +++--
 3 files changed, 293 insertions(+), 270 deletions(-)

diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index d5ab658..048e7bd 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -369,11 +369,11 @@ config BACKLIGHT_AAT2870
 	  backlight driver.
 
 config BACKLIGHT_LM3630
-	tristate "Backlight Driver for LM3630"
+	tristate "Backlight Driver for LM3630A"
 	depends on BACKLIGHT_CLASS_DEVICE && I2C
 	select REGMAP_I2C
 	help
-	  This supports TI LM3630 Backlight Driver
+	  This supports TI LM3630A Backlight Driver
 
 config BACKLIGHT_LM3639
 	tristate "Backlight Driver for LM3639"
diff --git a/drivers/video/backlight/lm3630_bl.c b/drivers/video/backlight/lm3630_bl.c
index 76a62e9..0e9d4e7 100644
--- a/drivers/video/backlight/lm3630_bl.c
+++ b/drivers/video/backlight/lm3630_bl.c
@@ -1,5 +1,5 @@
 /*
-* Simple driver for Texas Instruments LM3630 Backlight driver chip
+* Simple driver for Texas Instruments LM3630A Backlight driver chip
 * Copyright (C) 2012 Texas Instruments
 *
 * This program is free software; you can redistribute it and/or modify
@@ -16,12 +16,16 @@
 #include <linux/uaccess.h>
 #include <linux/interrupt.h>
 #include <linux/regmap.h>
+#include <linux/pwm.h>
 #include <linux/platform_data/lm3630_bl.h>
 
 #define REG_CTRL	0x00
+#define REG_BOOST	0x02
 #define REG_CONFIG	0x01
 #define REG_BRT_A	0x03
 #define REG_BRT_B	0x04
+#define REG_I_A		0x05
+#define REG_I_B		0x06
 #define REG_INT_STATUS	0x09
 #define REG_INT_EN	0x0A
 #define REG_FAULT	0x0B
@@ -30,205 +34,211 @@
 #define REG_MAX		0x1F
 
 #define INT_DEBOUNCE_MSEC	10
-
-enum lm3630_leds {
-	BLED_ALL = 0,
-	BLED_1,
-	BLED_2
-};
-
-static const char * const bled_name[] = {
-	[BLED_ALL] = "lm3630_bled",	/*Bank1 controls all string */
-	[BLED_1] = "lm3630_bled1",	/*Bank1 controls bled1 */
-	[BLED_2] = "lm3630_bled2",	/*Bank1 or 2 controls bled2 */
-};
-
-struct lm3630_chip_data {
+struct lm3630_chip {
 	struct device *dev;
 	struct delayed_work work;
+
 	int irq;
 	struct workqueue_struct *irqthread;
 	struct lm3630_platform_data *pdata;
-	struct backlight_device *bled1;
-	struct backlight_device *bled2;
+	struct backlight_device *bleda;
+	struct backlight_device *bledb;
 	struct regmap *regmap;
+	struct pwm_device *pwmd;
 };
 
-/* initialize chip */
-static int lm3630_chip_init(struct lm3630_chip_data *pchip)
+/* i2c access */
+static int lm3630_read(struct lm3630_chip *pchip, unsigned int reg)
 {
-	int ret;
+	int rval;
 	unsigned int reg_val;
-	struct lm3630_platform_data *pdata = pchip->pdata;
-
-	/*pwm control */
-	reg_val = ((pdata->pwm_active & 0x01) << 2) | (pdata->pwm_ctrl & 0x03);
-	ret = regmap_update_bits(pchip->regmap, REG_CONFIG, 0x07, reg_val);
-	if (ret < 0)
-		goto out;
 
-	/* bank control */
-	reg_val = ((pdata->bank_b_ctrl & 0x01) << 1) |
-			(pdata->bank_a_ctrl & 0x07);
-	ret = regmap_update_bits(pchip->regmap, REG_CTRL, 0x07, reg_val);
-	if (ret < 0)
-		goto out;
+	rval = regmap_read(pchip->regmap, reg, &reg_val);
+	if (rval < 0)
+		return rval;
+	return reg_val & 0xFF;
+}
 
-	ret = regmap_update_bits(pchip->regmap, REG_CTRL, 0x80, 0x00);
-	if (ret < 0)
-		goto out;
+static int lm3630_write(struct lm3630_chip *pchip,
+			unsigned int reg, unsigned int data)
+{
+	return regmap_write(pchip->regmap, reg, data);
+}
 
-	/* set initial brightness */
-	if (pdata->bank_a_ctrl != BANK_A_CTRL_DISABLE) {
-		ret = regmap_write(pchip->regmap,
-				   REG_BRT_A, pdata->init_brt_led1);
-		if (ret < 0)
-			goto out;
-	}
+static int lm3630_update(struct lm3630_chip *pchip,
+			 unsigned int reg, unsigned int mask, unsigned int data)
+{
+	return regmap_update_bits(pchip->regmap, reg, mask, data);
+}
 
-	if (pdata->bank_b_ctrl != BANK_B_CTRL_DISABLE) {
-		ret = regmap_write(pchip->regmap,
-				   REG_BRT_B, pdata->init_brt_led2);
-		if (ret < 0)
-			goto out;
-	}
-	return ret;
+/* initialize chip */
+static int lm3630_chip_init(struct lm3630_chip *pchip)
+{
+	int rval;
+	struct lm3630_platform_data *pdata = pchip->pdata;
 
-out:
-	dev_err(pchip->dev, "i2c failed to access register\n");
-	return ret;
+	mdelay(1);
+	/* set Filter Strength Register */
+	rval = lm3630_write(pchip, 0x50, 0x03);
+	/* set Cofig. register */
+	rval |= lm3630_update(pchip, REG_CONFIG, 0x07, pdata->pwm_ctrl);
+	/* set boost control */
+	rval |= lm3630_write(pchip, REG_BOOST, 0x38);
+	/* set current A */
+	rval |= lm3630_update(pchip, REG_I_A, 0x1F, 0x1F);
+	/* set current B */
+	rval |= lm3630_write(pchip, REG_I_B, 0x1F);
+	/* set control */
+	rval |=
+	    lm3630_write(pchip, REG_CTRL, pdata->leda_ctrl | pdata->ledb_ctrl);
+	mdelay(1);
+	/* set brightness A and B */
+	rval |= lm3630_write(pchip, REG_BRT_A, pdata->leda_init_brt);
+	rval |= lm3630_write(pchip, REG_BRT_B, pdata->ledb_init_brt);
+
+	if (rval < 0)
+		dev_err(pchip->dev, "i2c failed to access register\n");
+	return rval;
 }
 
 /* interrupt handling */
 static void lm3630_delayed_func(struct work_struct *work)
 {
-	int ret;
-	unsigned int reg_val;
-	struct lm3630_chip_data *pchip;
+	unsigned int rval;
+	struct lm3630_chip *pchip;
 
-	pchip = container_of(work, struct lm3630_chip_data, work.work);
+	pchip = container_of(work, struct lm3630_chip, work.work);
 
-	ret = regmap_read(pchip->regmap, REG_INT_STATUS, &reg_val);
-	if (ret < 0) {
+	rval = lm3630_read(pchip, REG_INT_STATUS);
+	if (rval < 0) {
 		dev_err(pchip->dev,
 			"i2c failed to access REG_INT_STATUS Register\n");
 		return;
 	}
 
-	dev_info(pchip->dev, "REG_INT_STATUS Register is 0x%x\n", reg_val);
+	dev_info(pchip->dev, "REG_INT_STATUS Register is 0x%x\n", rval);
 }
 
 static irqreturn_t lm3630_isr_func(int irq, void *chip)
 {
-	int ret;
-	struct lm3630_chip_data *pchip = chip;
+	int rval;
+	struct lm3630_chip *pchip = chip;
 	unsigned long delay = msecs_to_jiffies(INT_DEBOUNCE_MSEC);
 
 	queue_delayed_work(pchip->irqthread, &pchip->work, delay);
 
-	ret = regmap_update_bits(pchip->regmap, REG_CTRL, 0x80, 0x00);
-	if (ret < 0)
-		goto out;
+	rval = lm3630_update(pchip, REG_CTRL, 0x80, 0x00);
+	if (rval < 0)
+		goto out_i2c_err;
 
 	return IRQ_HANDLED;
-out:
+out_i2c_err:
 	dev_err(pchip->dev, "i2c failed to access register\n");
 	return IRQ_HANDLED;
 }
 
-static int lm3630_intr_config(struct lm3630_chip_data *pchip)
+static int lm3630_intr_config(struct lm3630_chip *pchip)
 {
+	int rval;
+
+	rval = lm3630_write(pchip, REG_INT_EN, 0x87);
+	if (rval < 0)
+		return rval;
+
 	INIT_DELAYED_WORK(&pchip->work, lm3630_delayed_func);
 	pchip->irqthread = create_singlethread_workqueue("lm3630-irqthd");
 	if (!pchip->irqthread) {
-		dev_err(pchip->dev, "create irq thread fail...\n");
+		dev_err(pchip->dev, "create irq thread fail\n");
 		return -1;
 	}
 	if (request_threaded_irq
 	    (pchip->irq, NULL, lm3630_isr_func,
 	     IRQF_TRIGGER_FALLING | IRQF_ONESHOT, "lm3630_irq", pchip)) {
-		dev_err(pchip->dev, "request threaded irq fail..\n");
+		dev_err(pchip->dev, "request threaded irq fail\n");
 		return -1;
 	}
-	return 0;
+	return rval;
 }
 
-static bool
-set_intensity(struct backlight_device *bl, struct lm3630_chip_data *pchip)
+static void lm3630_pwm_ctrl(struct lm3630_chip *pchip, int br, int br_max)
 {
-	if (!pchip->pdata->pwm_set_intensity)
-		return false;
-	pchip->pdata->pwm_set_intensity(bl->props.brightness - 1,
-					pchip->pdata->pwm_period);
-	return true;
+	unsigned int period = pwm_get_period(pchip->pwmd);
+	unsigned int duty = br * period / br_max;
+
+	pwm_config(pchip->pwmd, duty, period);
+	if (duty)
+		pwm_enable(pchip->pwmd);
+	else
+		pwm_disable(pchip->pwmd);
 }
 
 /* update and get brightness */
 static int lm3630_bank_a_update_status(struct backlight_device *bl)
 {
 	int ret;
-	struct lm3630_chip_data *pchip = bl_get_data(bl);
+	struct lm3630_chip *pchip = bl_get_data(bl);
 	enum lm3630_pwm_ctrl pwm_ctrl = pchip->pdata->pwm_ctrl;
 
-	/* brightness 0 means disable */
-	if (!bl->props.brightness) {
-		ret = regmap_update_bits(pchip->regmap, REG_CTRL, 0x04, 0x00);
-		if (ret < 0)
-			goto out;
+	/* pwm control */
+	if ((pwm_ctrl & LM3630_PWM_BANK_A) != 0) {
+		lm3630_pwm_ctrl(pchip, bl->props.brightness,
+				bl->props.max_brightness);
 		return bl->props.brightness;
 	}
 
-	/* pwm control */
-	if (pwm_ctrl == PWM_CTRL_BANK_A || pwm_ctrl == PWM_CTRL_BANK_ALL) {
-		if (!set_intensity(bl, pchip))
-			dev_err(pchip->dev, "No pwm control func. in plat-data\n");
-	} else {
-
-		/* i2c control */
-		ret = regmap_update_bits(pchip->regmap, REG_CTRL, 0x80, 0x00);
-		if (ret < 0)
-			goto out;
-		mdelay(1);
-		ret = regmap_write(pchip->regmap,
-				   REG_BRT_A, bl->props.brightness - 1);
-		if (ret < 0)
-			goto out;
-	}
+	/* disable sleep */
+	ret = lm3630_update(pchip, REG_CTRL, 0x80, 0x00);
+	if (ret < 0)
+		goto out_i2c_err;
+	mdelay(1);
+	/* minimum brightness is 0x04 */
+	ret = lm3630_write(pchip, REG_BRT_A, bl->props.brightness);
+	if (bl->props.brightness < 0x4)
+		ret |= lm3630_update(pchip, REG_CTRL, LM3630_LEDA_ENABLE, 0);
+	else
+		ret |= lm3630_update(pchip, REG_CTRL,
+				     LM3630_LEDA_ENABLE, LM3630_LEDA_ENABLE);
+	if (ret < 0)
+		goto out_i2c_err;
 	return bl->props.brightness;
-out:
-	dev_err(pchip->dev, "i2c failed to access REG_CTRL\n");
+
+out_i2c_err:
+	dev_err(pchip->dev, "i2c failed to access\n");
 	return bl->props.brightness;
 }
 
 static int lm3630_bank_a_get_brightness(struct backlight_device *bl)
 {
-	unsigned int reg_val;
-	int brightness, ret;
-	struct lm3630_chip_data *pchip = bl_get_data(bl);
+	int brightness, rval;
+	struct lm3630_chip *pchip = bl_get_data(bl);
 	enum lm3630_pwm_ctrl pwm_ctrl = pchip->pdata->pwm_ctrl;
 
-	if (pwm_ctrl == PWM_CTRL_BANK_A || pwm_ctrl == PWM_CTRL_BANK_ALL) {
-		ret = regmap_read(pchip->regmap, REG_PWM_OUTHIGH, &reg_val);
-		if (ret < 0)
-			goto out;
-		brightness = reg_val & 0x01;
-		ret = regmap_read(pchip->regmap, REG_PWM_OUTLOW, &reg_val);
-		if (ret < 0)
-			goto out;
-		brightness = ((brightness << 8) | reg_val) + 1;
-	} else {
-		ret = regmap_update_bits(pchip->regmap, REG_CTRL, 0x80, 0x00);
-		if (ret < 0)
-			goto out;
-		mdelay(1);
-		ret = regmap_read(pchip->regmap, REG_BRT_A, &reg_val);
-		if (ret < 0)
-			goto out;
-		brightness = reg_val + 1;
+	if ((pwm_ctrl & LM3630_PWM_BANK_A) != 0) {
+		rval = lm3630_read(pchip, REG_PWM_OUTHIGH);
+		if (rval < 0)
+			goto out_i2c_err;
+		brightness = rval & 0x01;
+		rval = lm3630_read(pchip, REG_PWM_OUTLOW);
+		if (rval < 0)
+			goto out_i2c_err;
+		brightness = ((brightness << 8) | rval);
+		goto out;
 	}
+
+	/* disable sleep */
+	rval = lm3630_update(pchip, REG_CTRL, 0x80, 0x00);
+	if (rval < 0)
+		goto out_i2c_err;
+	mdelay(1);
+	rval = lm3630_read(pchip, REG_BRT_A);
+	if (rval < 0)
+		goto out_i2c_err;
+	brightness = rval;
+
+out:
 	bl->props.brightness = brightness;
 	return bl->props.brightness;
-out:
+out_i2c_err:
 	dev_err(pchip->dev, "i2c failed to access register\n");
 	return 0;
 }
@@ -239,62 +249,75 @@ static const struct backlight_ops lm3630_bank_a_ops = {
 	.get_brightness = lm3630_bank_a_get_brightness,
 };
 
+/* update and get brightness */
 static int lm3630_bank_b_update_status(struct backlight_device *bl)
 {
 	int ret;
-	struct lm3630_chip_data *pchip = bl_get_data(bl);
+	struct lm3630_chip *pchip = bl_get_data(bl);
 	enum lm3630_pwm_ctrl pwm_ctrl = pchip->pdata->pwm_ctrl;
 
-	if (pwm_ctrl == PWM_CTRL_BANK_B || pwm_ctrl == PWM_CTRL_BANK_ALL) {
-		if (!set_intensity(bl, pchip))
-			dev_err(pchip->dev,
-				"no pwm control func. in plat-data\n");
-	} else {
-		ret = regmap_update_bits(pchip->regmap, REG_CTRL, 0x80, 0x00);
-		if (ret < 0)
-			goto out;
-		mdelay(1);
-		ret = regmap_write(pchip->regmap,
-				   REG_BRT_B, bl->props.brightness - 1);
+	/* pwm control */
+	if ((pwm_ctrl & LM3630_PWM_BANK_B) != 0) {
+		lm3630_pwm_ctrl(pchip, bl->props.brightness,
+				bl->props.max_brightness);
+		return bl->props.brightness;
 	}
+
+	/* disable sleep */
+	ret = lm3630_update(pchip, REG_CTRL, 0x80, 0x00);
+	if (ret < 0)
+		goto out_i2c_err;
+	mdelay(1);
+	/* minimum brightness is 0x04 */
+	ret = lm3630_write(pchip, REG_BRT_B, bl->props.brightness);
+	if (bl->props.brightness < 0x4)
+		ret |= lm3630_update(pchip, REG_CTRL, LM3630_LEDB_ENABLE, 0);
+	else
+		ret |= lm3630_update(pchip, REG_CTRL,
+				     LM3630_LEDB_ENABLE, LM3630_LEDB_ENABLE);
+	if (ret < 0)
+		goto out_i2c_err;
 	return bl->props.brightness;
-out:
-	dev_err(pchip->dev, "i2c failed to access register\n");
+
+out_i2c_err:
+	dev_err(pchip->dev, "i2c failed to access REG_CTRL\n");
 	return bl->props.brightness;
 }
 
 static int lm3630_bank_b_get_brightness(struct backlight_device *bl)
 {
-	unsigned int reg_val;
-	int brightness, ret;
-	struct lm3630_chip_data *pchip = bl_get_data(bl);
+	int brightness, rval;
+	struct lm3630_chip *pchip = bl_get_data(bl);
 	enum lm3630_pwm_ctrl pwm_ctrl = pchip->pdata->pwm_ctrl;
 
-	if (pwm_ctrl == PWM_CTRL_BANK_B || pwm_ctrl == PWM_CTRL_BANK_ALL) {
-		ret = regmap_read(pchip->regmap, REG_PWM_OUTHIGH, &reg_val);
-		if (ret < 0)
-			goto out;
-		brightness = reg_val & 0x01;
-		ret = regmap_read(pchip->regmap, REG_PWM_OUTLOW, &reg_val);
-		if (ret < 0)
-			goto out;
-		brightness = ((brightness << 8) | reg_val) + 1;
-	} else {
-		ret = regmap_update_bits(pchip->regmap, REG_CTRL, 0x80, 0x00);
-		if (ret < 0)
-			goto out;
-		mdelay(1);
-		ret = regmap_read(pchip->regmap, REG_BRT_B, &reg_val);
-		if (ret < 0)
-			goto out;
-		brightness = reg_val + 1;
+	if ((pwm_ctrl & LM3630_PWM_BANK_B) != 0) {
+		rval = lm3630_read(pchip, REG_PWM_OUTHIGH);
+		if (rval < 0)
+			goto out_i2c_err;
+		brightness = rval & 0x01;
+		rval = lm3630_read(pchip, REG_PWM_OUTLOW);
+		if (rval < 0)
+			goto out_i2c_err;
+		brightness = ((brightness << 8) | rval);
+		goto out;
 	}
-	bl->props.brightness = brightness;
 
-	return bl->props.brightness;
+	/* disable sleep */
+	rval = lm3630_update(pchip, REG_CTRL, 0x80, 0x00);
+	if (rval < 0)
+		goto out_i2c_err;
+	mdelay(1);
+	rval = lm3630_read(pchip, REG_BRT_B);
+	if (rval < 0)
+		goto out_i2c_err;
+	brightness = rval;
+
 out:
-	dev_err(pchip->dev, "i2c failed to access register\n");
+	bl->props.brightness = brightness;
 	return bl->props.brightness;
+out_i2c_err:
+	dev_err(pchip->dev, "i2c failed to access register\n");
+	return 0;
 }
 
 static const struct backlight_ops lm3630_bank_b_ops = {
@@ -303,44 +326,41 @@ static const struct backlight_ops lm3630_bank_b_ops = {
 	.get_brightness = lm3630_bank_b_get_brightness,
 };
 
-static int lm3630_backlight_register(struct lm3630_chip_data *pchip,
-				     enum lm3630_leds ledno)
+static int lm3630_backlight_register(struct lm3630_chip *pchip)
 {
-	const char *name = bled_name[ledno];
 	struct backlight_properties props;
 	struct lm3630_platform_data *pdata = pchip->pdata;
 
 	props.type = BACKLIGHT_RAW;
-	switch (ledno) {
-	case BLED_1:
-	case BLED_ALL:
-		props.brightness = pdata->init_brt_led1;
-		props.max_brightness = pdata->max_brt_led1;
-		pchip->bled1 =
-		    backlight_device_register(name, pchip->dev, pchip,
+	if (pdata->leda_ctrl != LM3630_LEDA_DISABLE) {
+		props.brightness = pdata->leda_init_brt;
+		props.max_brightness = pdata->leda_max_brt;
+		pchip->bleda =
+		    backlight_device_register("lm3630_leda", pchip->dev, pchip,
 					      &lm3630_bank_a_ops, &props);
-		if (IS_ERR(pchip->bled1))
-			return PTR_ERR(pchip->bled1);
-		break;
-	case BLED_2:
-		props.brightness = pdata->init_brt_led2;
-		props.max_brightness = pdata->max_brt_led2;
-		pchip->bled2 =
-		    backlight_device_register(name, pchip->dev, pchip,
+		if (IS_ERR(pchip->bleda))
+			return PTR_ERR(pchip->bleda);
+	}
+
+	if ((pdata->ledb_ctrl != LM3630_LEDB_DISABLE) &&
+	    (pdata->ledb_ctrl != LM3630_LEDB_ON_A)) {
+		props.brightness = pdata->ledb_init_brt;
+		props.max_brightness = pdata->ledb_max_brt;
+		pchip->bledb =
+		    backlight_device_register("lm3630_ledb", pchip->dev, pchip,
 					      &lm3630_bank_b_ops, &props);
-		if (IS_ERR(pchip->bled2))
-			return PTR_ERR(pchip->bled2);
-		break;
+		if (IS_ERR(pchip->bledb))
+			return PTR_ERR(pchip->bledb);
 	}
 	return 0;
 }
 
-static void lm3630_backlight_unregister(struct lm3630_chip_data *pchip)
+static void lm3630_backlight_unregister(struct lm3630_chip *pchip)
 {
-	if (pchip->bled1)
-		backlight_device_unregister(pchip->bled1);
-	if (pchip->bled2)
-		backlight_device_unregister(pchip->bled2);
+	if (pchip->bleda)
+		backlight_device_unregister(pchip->bleda);
+	if (pchip->bledb)
+		backlight_device_unregister(pchip->bledb);
 }
 
 static const struct regmap_config lm3630_regmap = {
@@ -350,96 +370,92 @@ static const struct regmap_config lm3630_regmap = {
 };
 
 static int lm3630_probe(struct i2c_client *client,
-				  const struct i2c_device_id *id)
+			const struct i2c_device_id *id)
 {
 	struct lm3630_platform_data *pdata = client->dev.platform_data;
-	struct lm3630_chip_data *pchip;
-	int ret;
+	struct lm3630_chip *pchip;
+	int rval;
 
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
-		dev_err(&client->dev, "fail : i2c functionality check...\n");
+		dev_err(&client->dev, "fail : i2c functionality check\n");
 		return -EOPNOTSUPP;
 	}
 
-	if (pdata == NULL) {
-		dev_err(&client->dev, "fail : no platform data.\n");
-		return -ENODATA;
-	}
-
-	pchip = devm_kzalloc(&client->dev, sizeof(struct lm3630_chip_data),
+	pchip = devm_kzalloc(&client->dev, sizeof(struct lm3630_chip),
 			     GFP_KERNEL);
 	if (!pchip)
 		return -ENOMEM;
-	pchip->pdata = pdata;
 	pchip->dev = &client->dev;
 
 	pchip->regmap = devm_regmap_init_i2c(client, &lm3630_regmap);
 	if (IS_ERR(pchip->regmap)) {
-		ret = PTR_ERR(pchip->regmap);
-		dev_err(&client->dev, "fail : allocate register map: %d\n",
-			ret);
-		return ret;
+		rval = PTR_ERR(pchip->regmap);
+		dev_err(&client->dev, "fail : allocate reg. map: %d\n", rval);
+		return rval;
 	}
+
 	i2c_set_clientdata(client, pchip);
+	if (pdata == NULL) {
+		pchip->pdata = devm_kzalloc(pchip->dev,
+					    sizeof(struct lm3630_platform_data),
+					    GFP_KERNEL);
+		if (pchip->pdata == NULL)
+			return -ENOMEM;
+		/* default values */
+		pchip->pdata->leda_ctrl = LM3630_LEDA_ENABLE;
+		pchip->pdata->ledb_ctrl = LM3630_LEDB_ENABLE;
+		pchip->pdata->leda_max_brt = LM3630_MAX_BRIGHTNESS;
+		pchip->pdata->ledb_max_brt = LM3630_MAX_BRIGHTNESS;
+		pchip->pdata->leda_init_brt = LM3630_MAX_BRIGHTNESS;
+		pchip->pdata->ledb_init_brt = LM3630_MAX_BRIGHTNESS;
+	} else
+		pchip->pdata = pdata;
 
 	/* chip initialize */
-	ret = lm3630_chip_init(pchip);
-	if (ret < 0) {
+	rval = lm3630_chip_init(pchip);
+	if (rval < 0) {
 		dev_err(&client->dev, "fail : init chip\n");
-		goto err_chip_init;
-	}
-
-	switch (pdata->bank_a_ctrl) {
-	case BANK_A_CTRL_ALL:
-		ret = lm3630_backlight_register(pchip, BLED_ALL);
-		pdata->bank_b_ctrl = BANK_B_CTRL_DISABLE;
-		break;
-	case BANK_A_CTRL_LED1:
-		ret = lm3630_backlight_register(pchip, BLED_1);
-		break;
-	case BANK_A_CTRL_LED2:
-		ret = lm3630_backlight_register(pchip, BLED_2);
-		pdata->bank_b_ctrl = BANK_B_CTRL_DISABLE;
-		break;
-	default:
-		break;
+		return rval;
 	}
-
-	if (ret < 0)
+	/* backlight register */
+	rval = lm3630_backlight_register(pchip);
+	if (rval < 0) {
+		dev_err(&client->dev, "fail : backlight register.\n");
 		goto err_bl_reg;
-
-	if (pdata->bank_b_ctrl && pchip->bled2 == NULL) {
-		ret = lm3630_backlight_register(pchip, BLED_2);
-		if (ret < 0)
+	}
+	/* pwm */
+	if (pdata->pwm_ctrl != LM3630_PWM_DISABLE) {
+		pchip->pwmd = devm_pwm_get(pchip->dev, "lm3630-pwm");
+		if (IS_ERR(pchip->pwmd)) {
+			dev_err(&client->dev, "fail : get pwm device\n");
 			goto err_bl_reg;
+		}
 	}
+	pchip->pwmd->period = pdata->pwm_period;
 
 	/* interrupt enable  : irq 0 is not allowed for lm3630 */
 	pchip->irq = client->irq;
 	if (pchip->irq)
 		lm3630_intr_config(pchip);
-
 	dev_info(&client->dev, "LM3630 backlight register OK.\n");
 	return 0;
 
 err_bl_reg:
-	dev_err(&client->dev, "fail : backlight register.\n");
 	lm3630_backlight_unregister(pchip);
-err_chip_init:
-	return ret;
+	return rval;
 }
 
 static int lm3630_remove(struct i2c_client *client)
 {
-	int ret;
-	struct lm3630_chip_data *pchip = i2c_get_clientdata(client);
+	int rval;
+	struct lm3630_chip *pchip = i2c_get_clientdata(client);
 
-	ret = regmap_write(pchip->regmap, REG_BRT_A, 0);
-	if (ret < 0)
+	rval = lm3630_write(pchip, REG_BRT_A, 0);
+	if (rval < 0)
 		dev_err(pchip->dev, "i2c failed to access register\n");
 
-	ret = regmap_write(pchip->regmap, REG_BRT_B, 0);
-	if (ret < 0)
+	rval = lm3630_write(pchip, REG_BRT_B, 0);
+	if (rval < 0)
 		dev_err(pchip->dev, "i2c failed to access register\n");
 
 	lm3630_backlight_unregister(pchip);
@@ -470,6 +486,5 @@ static struct i2c_driver lm3630_i2c_driver = {
 module_i2c_driver(lm3630_i2c_driver);
 
 MODULE_DESCRIPTION("Texas Instruments Backlight driver for LM3630");
-MODULE_AUTHOR("G.Shark Jeong <gshark.jeong@gmail.com>");
 MODULE_AUTHOR("Daniel Jeong <daniel.jeong@ti.com>");
 MODULE_LICENSE("GPL v2");
diff --git a/include/linux/platform_data/lm3630_bl.h b/include/linux/platform_data/lm3630_bl.h
index 9176dd3..7282211 100644
--- a/include/linux/platform_data/lm3630_bl.h
+++ b/include/linux/platform_data/lm3630_bl.h
@@ -11,47 +11,55 @@
 #ifndef __LINUX_LM3630_H
 #define __LINUX_LM3630_H
 
-#define LM3630_NAME "lm3630_bl"
+#define LM3630_NAME "lm3630a_bl"
 
 enum lm3630_pwm_ctrl {
-	PWM_CTRL_DISABLE = 0,
-	PWM_CTRL_BANK_A,
-	PWM_CTRL_BANK_B,
-	PWM_CTRL_BANK_ALL,
+	LM3630_PWM_DISABLE = 0x00,
+	LM3630_PWM_BANK_A,
+	LM3630_PWM_BANK_B,
+	LM3630_PWM_BANK_ALL,
+	LM3630_PWM_BANK_A_ACT_LOW = 0x05,
+	LM3630_PWM_BANK_B_ACT_LOW,
+	LM3630_PWM_BANK_ALL_ACT_LOW,
 };
 
-enum lm3630_pwm_active {
-	PWM_ACTIVE_HIGH = 0,
-	PWM_ACTIVE_LOW,
+enum lm3630_leda_ctrl {
+	LM3630_LEDA_DISABLE = 0x00,
+	LM3630_LEDA_ENABLE = 0x04,
+	LM3630_LEDA_ENABLE_LINEAR = 0x14,
 };
 
-enum lm3630_bank_a_ctrl {
-	BANK_A_CTRL_DISABLE = 0x0,
-	BANK_A_CTRL_LED1 = 0x4,
-	BANK_A_CTRL_LED2 = 0x1,
-	BANK_A_CTRL_ALL = 0x5,
-};
-
-enum lm3630_bank_b_ctrl {
-	BANK_B_CTRL_DISABLE = 0,
-	BANK_B_CTRL_LED2,
+enum lm3630_ledb_ctrl {
+	LM3630_LEDB_DISABLE = 0x00,
+	LM3630_LEDB_ON_A = 0x01,
+	LM3630_LEDB_ENABLE = 0x02,
+	LM3630_LEDB_ENABLE_LINEAR = 0x0A,
 };
 
+#define LM3630_MAX_BRIGHTNESS 255
+/*
+ *@leda_init_brt : led a init brightness. 4~255
+ *@leda_max_brt  : led a max brightness.  4~255
+ *@leda_ctrl     : led a disable, enable linear, enable exponential
+ *@ledb_init_brt : led b init brightness. 4~255
+ *@ledb_max_brt  : led b max brightness.  4~255
+ *@ledb_ctrl     : led b disable, enable linear, enable exponential
+ *@pwm_period    : pwm period
+ *@pwm_ctrl      : pwm disable, bank a or b, active high or low
+ */
 struct lm3630_platform_data {
 
-	/* maximum brightness */
-	int max_brt_led1;
-	int max_brt_led2;
-
-	/* initial on brightness */
-	int init_brt_led1;
-	int init_brt_led2;
-	enum lm3630_pwm_ctrl pwm_ctrl;
-	enum lm3630_pwm_active pwm_active;
-	enum lm3630_bank_a_ctrl bank_a_ctrl;
-	enum lm3630_bank_b_ctrl bank_b_ctrl;
+	/* led a config.  */
+	int leda_init_brt;
+	int leda_max_brt;
+	enum lm3630_leda_ctrl leda_ctrl;
+	/* led b config. */
+	int ledb_init_brt;
+	int ledb_max_brt;
+	enum lm3630_ledb_ctrl ledb_ctrl;
+	/* pwm config. */
 	unsigned int pwm_period;
-	void (*pwm_set_intensity) (int brightness, int max_brightness);
+	enum lm3630_pwm_ctrl pwm_ctrl;
 };
 
 #endif /* __LINUX_LM3630_H */
-- 
1.7.9.5


^ permalink raw reply	[flat|nested] 3+ messages in thread
end of thread, other threads:[~2013-07-22  6:57 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-07-19 10:49 [PATCH] backlight-lm3630-apply chip revision daniel jeong
2013-07-19 10:49 ` daniel jeong
2013-07-22  6:57   ` Jingoo Han

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome