[PATCH]Add device drivers (GbE, Packet Hub) for Topcliff

[PATCH]Add device drivers (GbE, Packet Hub) for Topcliff

[Masayuki Ohtake]

I developed the device drivers for Linux kernel 2.6.33-1.
This time, I added the following drivers
  - GbE device
  - Packet HUB device

Would you check them?

The patch is uploaded to our WEB site in Sourceforge.net,
Because the patch size was large.

[Our WEB site in Sourceforge.net.]
http://sourceforge.net/projects/generalembedded/files/
"All Files" -> "Downloads" -> "Dev" -> "kernel 2.6.33-1"
  - pch_gbe.patch  (for GbE device)
  - pch_phub.patch (for Packet HUB device)


[About our development product]
Topcliff is a chip that has many peripherals.
The chip has UART, I2C, SPI, IEEE1588, CAN, Packet HUB, SATA, USB host, USB
device, SDIO, Gigabit Ethernet, GPIO and DMA.

Best regards,

Re: [PATCH]Add device drivers (GbE, Packet Hub) for Topcliff

[Jonathan Corbet]

On Fri, 16 Apr 2010 19:09:04 +0900
"Masayuki Ohtake" <masa-korg@dsn.okisemi.com> wrote:

> I developed the device drivers for Linux kernel 2.6.33-1.
> This time, I added the following drivers
>   - GbE device
>   - Packet HUB device
> 
> Would you check them?

Thanks for making your code available.  May I suggest, though, that you
will get a much better response if you post the patches directly to the
mailing list?  That is how our process works; it is simply harder to
review code if you have to do digging through web sites to find it.

Networking-specific patches should be posted to the netdev list as well.

More information on how to post code for review can be found in the
kernel source tree:

	Documentation/HOWTO
	Documentation/development-process

Thanks,

jon

Re: [PATCH]Add device drivers (GbE, Packet Hub) for Topcliff

[Masayuki Ohtake]

Hi jon,
Thanks for your suggestion again.
I joined the netdev and send my patch to "netdev <netdev@vger.kernel.org>".

--
Hello netdev users,

I developed the device drivers for Linux kernel 2.6.33-1.
This time, I added the following drivers
  - GbE device
  - Packet HUB device

The GbE and Packet Hub device drivers are related with each other.
Because I send patch to LKML <linux-kernel@vger.kernel.org> and the netdev
<netdev@vger.kernel.org> mailing list.

Would you check them?

The patch is uploaded to our WEB site in Sourceforge.net,
Because the patch size was large.

[Our WEB site in Sourceforge.net.]
http://sourceforge.net/projects/generalembedded/files/
"All Files" -> "Downloads" -> "Dev" -> "kernel 2.6.33-1"
  - pch_gbe.patch  (for GbE device)
  - pch_phub.patch (for Packet HUB device)


[About our development product]
Topcliff is a chip that has many peripherals.
The chip has UART, I2C, SPI, IEEE1588, CAN, Packet HUB, SATA, USB host, USB
device, SDIO, Gigabit Ethernet, GPIO and DMA.

Best regards,
Masayuki Ohtake <masa-korg@dsn.okisemi.com>
----- Original Message ----- 
From: "Jonathan Corbet" <corbet@lwn.net>
To: "Masayuki Ohtake" <masa-korg@dsn.okisemi.com>
Cc: "LKML" <linux-kernel@vger.kernel.org>; "Intel OTC"
<joel.clark@intel.com>; <andrew.chih.howe.khor@intel.com>
Sent: Friday, April 16, 2010 11:35 PM
Subject: Re: [PATCH]Add device drivers (GbE, Packet Hub) for Topcliff


> On Fri, 16 Apr 2010 19:09:04 +0900
> "Masayuki Ohtake" <masa-korg@dsn.okisemi.com> wrote:
>
> > I developed the device drivers for Linux kernel 2.6.33-1.
> > This time, I added the following drivers
> >   - GbE device
> >   - Packet HUB device
> >
> > Would you check them?
>
> Thanks for making your code available.  May I suggest, though, that you
> will get a much better response if you post the patches directly to the
> mailing list?  That is how our process works; it is simply harder to
> review code if you have to do digging through web sites to find it.
>
> Networking-specific patches should be posted to the netdev list as well.
>
> More information on how to post code for review can be found in the
> kernel source tree:
>
> Documentation/HOWTO
> Documentation/development-process
>
> Thanks,
>
> jon
>

Re: [PATCH]Add device drivers (GbE, Packet Hub) for Topcliff

[Ben Hutchings]

On Mon, 2010-04-19 at 21:34 +0900, Masayuki Ohtake wrote:
> Hi jon,
> Thanks for your suggestion again.
> I joined the netdev and send my patch to "netdev <netdev@vger.kernel.org>".
> 
> --
> Hello netdev users,
> 
> I developed the device drivers for Linux kernel 2.6.33-1.
> This time, I added the following drivers
>   - GbE device
>   - Packet HUB device
> 
> The GbE and Packet Hub device drivers are related with each other.
> Because I send patch to LKML <linux-kernel@vger.kernel.org> and the netdev
> <netdev@vger.kernel.org> mailing list.
> 
> Would you check them?
> 
> The patch is uploaded to our WEB site in Sourceforge.net,
> Because the patch size was large.
[...]

Patches must be sent directly to the list for review, with few
exceptions.

The size limit for the list is 100 K.  Given that none of your source
files are this larger, you should be able to split pch_gbe.patch into 3
or more groups of source files, each within this limit.  The changes to
drivers/net/Kconfig and drivers/net/Makefile should be in the last part.

Ben.

-- 
Ben Hutchings, Senior Software Engineer, Solarflare Communications
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.