[PATCH V2 1/9] mfd: 88pm860x: drop devm_kfree of devm_kzalloc'd data

[PATCH V2 1/9] mfd: 88pm860x: drop devm_kfree of devm_kzalloc'd data

[Jingoo Han]

devm_kfree() allocates memory that is released when a driver detaches.
Thus, there is no reason to explicitly call devm_kfree() in probe or remove
functions.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
---
No changes since v1:

 drivers/mfd/88pm860x-core.c |   12 +++---------
 1 files changed, 3 insertions(+), 9 deletions(-)

diff --git a/drivers/mfd/88pm860x-core.c b/drivers/mfd/88pm860x-core.c
index 893fc1b..31ca555 100644
--- a/drivers/mfd/88pm860x-core.c
+++ b/drivers/mfd/88pm860x-core.c
@@ -1144,17 +1144,15 @@ static int pm860x_probe(struct i2c_client *client,
 			return -ENOMEM;
 		ret = pm860x_dt_init(node, &client->dev, pdata);
 		if (ret)
-			goto err;
+			return ret;
 	} else if (!pdata) {
 		pr_info("No platform data in %s!\n", __func__);
 		return -EINVAL;
 	}
 
 	chip = kzalloc(sizeof(struct pm860x_chip), GFP_KERNEL);
-	if (chip == NULL) {
-		ret = -ENOMEM;
-		goto err;
-	}
+	if (chip == NULL)
+		return -ENOMEM;
 
 	chip->id = verify_addr(client);
 	chip->regmap = regmap_init_i2c(client, &pm860x_regmap_config);
@@ -1194,10 +1192,6 @@ static int pm860x_probe(struct i2c_client *client,
 
 	pm860x_device_init(chip, pdata);
 	return 0;
-err:
-	if (node)
-		devm_kfree(&client->dev, pdata);
-	return ret;
 }
 
 static int pm860x_remove(struct i2c_client *client)
-- 
1.7.2.5

[PATCH V2 2/9] mfd: lm3533: use devm_gpio_request_one()

[Jingoo Han]

Use devm_gpio_request_one() to make cleanup paths more simple.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
---
No changes since v1:

 drivers/mfd/lm3533-core.c |    8 ++------
 1 files changed, 2 insertions(+), 6 deletions(-)

diff --git a/drivers/mfd/lm3533-core.c b/drivers/mfd/lm3533-core.c
index ceebf2c..4b7e6da 100644
--- a/drivers/mfd/lm3533-core.c
+++ b/drivers/mfd/lm3533-core.c
@@ -496,8 +496,8 @@ static int lm3533_device_init(struct lm3533 *lm3533)
 	dev_set_drvdata(lm3533->dev, lm3533);
 
 	if (gpio_is_valid(lm3533->gpio_hwen)) {
-		ret = gpio_request_one(lm3533->gpio_hwen, GPIOF_OUT_INIT_LOW,
-								"lm3533-hwen");
+		ret = devm_gpio_request_one(lm3533->dev, lm3533->gpio_hwen,
+					GPIOF_OUT_INIT_LOW, "lm3533-hwen");
 		if (ret < 0) {
 			dev_err(lm3533->dev,
 				"failed to request HWEN GPIO %d\n",
@@ -528,8 +528,6 @@ err_unregister:
 	mfd_remove_devices(lm3533->dev);
 err_disable:
 	lm3533_disable(lm3533);
-	if (gpio_is_valid(lm3533->gpio_hwen))
-		gpio_free(lm3533->gpio_hwen);
 
 	return ret;
 }
@@ -542,8 +540,6 @@ static void lm3533_device_exit(struct lm3533 *lm3533)
 
 	mfd_remove_devices(lm3533->dev);
 	lm3533_disable(lm3533);
-	if (gpio_is_valid(lm3533->gpio_hwen))
-		gpio_free(lm3533->gpio_hwen);
 }
 
 static bool lm3533_readable_register(struct device *dev, unsigned int reg)
-- 
1.7.2.5

[PATCH V2 3/9] mfd: intel_msic: use devm_gpio_request_one()

[Jingoo Han]

Use devm_gpio_request_one() to make cleanup paths more simple.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
---
No changes since v1:

 drivers/mfd/intel_msic.c |   10 ++--------
 1 files changed, 2 insertions(+), 8 deletions(-)

diff --git a/drivers/mfd/intel_msic.c b/drivers/mfd/intel_msic.c
index 1804331..5be3b5e 100644
--- a/drivers/mfd/intel_msic.c
+++ b/drivers/mfd/intel_msic.c
@@ -323,7 +323,8 @@ static int intel_msic_init_devices(struct intel_msic *msic)
 	if (pdata->ocd) {
 		unsigned gpio = pdata->ocd->gpio;
 
-		ret = gpio_request_one(gpio, GPIOF_IN, "ocd_gpio");
+		ret = devm_gpio_request_one(&pdev->dev, gpio,
+					GPIOF_IN, "ocd_gpio");
 		if (ret) {
 			dev_err(&pdev->dev, "failed to register OCD GPIO\n");
 			return ret;
@@ -332,7 +333,6 @@ static int intel_msic_init_devices(struct intel_msic *msic)
 		ret = gpio_to_irq(gpio);
 		if (ret < 0) {
 			dev_err(&pdev->dev, "no IRQ number for OCD GPIO\n");
-			gpio_free(gpio);
 			return ret;
 		}
 
@@ -359,8 +359,6 @@ static int intel_msic_init_devices(struct intel_msic *msic)
 
 fail:
 	mfd_remove_devices(&pdev->dev);
-	if (pdata->ocd)
-		gpio_free(pdata->ocd->gpio);
 
 	return ret;
 }
@@ -368,12 +366,8 @@ fail:
 static void intel_msic_remove_devices(struct intel_msic *msic)
 {
 	struct platform_device *pdev = msic->pdev;
-	struct intel_msic_platform_data *pdata = pdev->dev.platform_data;
 
 	mfd_remove_devices(&pdev->dev);
-
-	if (pdata->ocd)
-		gpio_free(pdata->ocd->gpio);
 }
 
 static int intel_msic_probe(struct platform_device *pdev)
-- 
1.7.2.5

[PATCH V2 4/9] mfd: omap-usb-host: use devm_gpio_request_one()

[Jingoo Han]

Use devm_gpio_request_one() to make cleanup paths more simple.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
---
No changes since v1:

 drivers/mfd/omap-usb-host.c |   23 ++---------------------
 1 files changed, 2 insertions(+), 21 deletions(-)

diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index 6b5edf6..2104d66 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -437,11 +437,11 @@ static void omap_usbhs_init(struct device *dev)
 
 	if (pdata->phy_reset) {
 		if (gpio_is_valid(pdata->reset_gpio_port[0]))
-			gpio_request_one(pdata->reset_gpio_port[0],
+			devm_gpio_request_one(dev, pdata->reset_gpio_port[0],
 					 GPIOF_OUT_INIT_LOW, "USB1 PHY reset");
 
 		if (gpio_is_valid(pdata->reset_gpio_port[1]))
-			gpio_request_one(pdata->reset_gpio_port[1],
+			devm_gpio_request_one(dev, pdata->reset_gpio_port[1],
 					 GPIOF_OUT_INIT_LOW, "USB2 PHY reset");
 
 		/* Hold the PHY in RESET for enough time till DIR is high */
@@ -492,21 +492,6 @@ static void omap_usbhs_init(struct device *dev)
 	}
 }
 
-static void omap_usbhs_deinit(struct device *dev)
-{
-	struct usbhs_hcd_omap		*omap = dev_get_drvdata(dev);
-	struct usbhs_omap_platform_data	*pdata = omap->pdata;
-
-	if (pdata->phy_reset) {
-		if (gpio_is_valid(pdata->reset_gpio_port[0]))
-			gpio_free(pdata->reset_gpio_port[0]);
-
-		if (gpio_is_valid(pdata->reset_gpio_port[1]))
-			gpio_free(pdata->reset_gpio_port[1]);
-	}
-}
-
-
 /**
  * usbhs_omap_probe - initialize TI-based HCDs
  *
@@ -709,8 +694,6 @@ static int usbhs_omap_probe(struct platform_device *pdev)
 	return 0;
 
 err_alloc:
-	omap_usbhs_deinit(&pdev->dev);
-
 	for (i = 0; i < omap->nports; i++) {
 		if (!IS_ERR(omap->utmi_clk[i]))
 			clk_put(omap->utmi_clk[i]);
@@ -755,8 +738,6 @@ static int usbhs_omap_remove(struct platform_device *pdev)
 	struct usbhs_hcd_omap *omap = platform_get_drvdata(pdev);
 	int i;
 
-	omap_usbhs_deinit(&pdev->dev);
-
 	for (i = 0; i < omap->nports; i++) {
 		if (!IS_ERR(omap->utmi_clk[i]))
 			clk_put(omap->utmi_clk[i]);
-- 
1.7.2.5

[PATCH V2 5/9] mfd: aat2870: use use devm_*() functions

[Jingoo Han]

Use devm_*() functions to make cleanup paths more simple.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
---
No changes since v1:

 drivers/mfd/aat2870-core.c |   20 ++++++--------------
 1 files changed, 6 insertions(+), 14 deletions(-)

diff --git a/drivers/mfd/aat2870-core.c b/drivers/mfd/aat2870-core.c
index f1beb49..dfdb0a2 100644
--- a/drivers/mfd/aat2870-core.c
+++ b/drivers/mfd/aat2870-core.c
@@ -367,12 +367,12 @@ static int aat2870_i2c_probe(struct i2c_client *client,
 	int i, j;
 	int ret = 0;
 
-	aat2870 = kzalloc(sizeof(struct aat2870_data), GFP_KERNEL);
+	aat2870 = devm_kzalloc(&client->dev, sizeof(struct aat2870_data),
+				GFP_KERNEL);
 	if (!aat2870) {
 		dev_err(&client->dev,
 			"Failed to allocate memory for aat2870\n");
-		ret = -ENOMEM;
-		goto out;
+		return -ENOMEM;
 	}
 
 	aat2870->dev = &client->dev;
@@ -400,12 +400,12 @@ static int aat2870_i2c_probe(struct i2c_client *client,
 		aat2870->init(aat2870);
 
 	if (aat2870->en_pin >= 0) {
-		ret = gpio_request_one(aat2870->en_pin, GPIOF_OUT_INIT_HIGH,
-				       "aat2870-en");
+		ret = devm_gpio_request_one(&client->dev, aat2870->en_pin,
+					GPIOF_OUT_INIT_HIGH, "aat2870-en");
 		if (ret < 0) {
 			dev_err(&client->dev,
 				"Failed to request GPIO %d\n", aat2870->en_pin);
-			goto out_kfree;
+			return ret;
 		}
 	}
 
@@ -436,11 +436,6 @@ static int aat2870_i2c_probe(struct i2c_client *client,
 
 out_disable:
 	aat2870_disable(aat2870);
-	if (aat2870->en_pin >= 0)
-		gpio_free(aat2870->en_pin);
-out_kfree:
-	kfree(aat2870);
-out:
 	return ret;
 }
 
@@ -452,11 +447,8 @@ static int aat2870_i2c_remove(struct i2c_client *client)
 
 	mfd_remove_devices(aat2870->dev);
 	aat2870_disable(aat2870);
-	if (aat2870->en_pin >= 0)
-		gpio_free(aat2870->en_pin);
 	if (aat2870->uninit)
 		aat2870->uninit(aat2870);
-	kfree(aat2870);
 
 	return 0;
 }
-- 
1.7.2.5

[PATCH V2 6/9] mfd: twl6040: use devm_*() functions

[Jingoo Han]

Use devm_*() functions to make cleanup paths more simple.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
---
Changes since v1:
- Use devm_free_irq()
- Use devm_regulator_bulk_get()

 drivers/mfd/twl6040.c |   31 +++++++++++--------------------
 1 files changed, 11 insertions(+), 20 deletions(-)

diff --git a/drivers/mfd/twl6040.c b/drivers/mfd/twl6040.c
index f361bf3..492ee2c 100644
--- a/drivers/mfd/twl6040.c
+++ b/drivers/mfd/twl6040.c
@@ -554,7 +554,7 @@ static int twl6040_probe(struct i2c_client *client,
 
 	twl6040->supplies[0].supply = "vio";
 	twl6040->supplies[1].supply = "v2v1";
-	ret = regulator_bulk_get(&client->dev, TWL6040_NUM_SUPPLIES,
+	ret = devm_regulator_bulk_get(&client->dev, TWL6040_NUM_SUPPLIES,
 				 twl6040->supplies);
 	if (ret != 0) {
 		dev_err(&client->dev, "Failed to get supplies: %d\n", ret);
@@ -564,7 +564,7 @@ static int twl6040_probe(struct i2c_client *client,
 	ret = regulator_bulk_enable(TWL6040_NUM_SUPPLIES, twl6040->supplies);
 	if (ret != 0) {
 		dev_err(&client->dev, "Failed to enable supplies: %d\n", ret);
-		goto power_err;
+		goto regulator_get_err;
 	}
 
 	twl6040->dev = &client->dev;
@@ -586,8 +586,8 @@ static int twl6040_probe(struct i2c_client *client,
 		twl6040->audpwron = -EINVAL;
 
 	if (gpio_is_valid(twl6040->audpwron)) {
-		ret = gpio_request_one(twl6040->audpwron, GPIOF_OUT_INIT_LOW,
-				       "audpwron");
+		ret = devm_gpio_request_one(&client->dev, twl6040->audpwron,
+					GPIOF_OUT_INIT_LOW, "audpwron");
 		if (ret)
 			goto gpio_err;
 	}
@@ -596,14 +596,14 @@ static int twl6040_probe(struct i2c_client *client,
 			IRQF_ONESHOT, 0, &twl6040_irq_chip,
 			&twl6040->irq_data);
 	if (ret < 0)
-		goto irq_init_err;
+		goto gpio_err;
 
 	twl6040->irq_ready = regmap_irq_get_virq(twl6040->irq_data,
 					       TWL6040_IRQ_READY);
 	twl6040->irq_th = regmap_irq_get_virq(twl6040->irq_data,
 					       TWL6040_IRQ_TH);
 
-	ret = request_threaded_irq(twl6040->irq_ready, NULL,
+	ret = devm_request_threaded_irq(twl6040->dev, twl6040->irq_ready, NULL,
 				   twl6040_readyint_handler, IRQF_ONESHOT,
 				   "twl6040_irq_ready", twl6040);
 	if (ret) {
@@ -611,7 +611,7 @@ static int twl6040_probe(struct i2c_client *client,
 		goto readyirq_err;
 	}
 
-	ret = request_threaded_irq(twl6040->irq_th, NULL,
+	ret = devm_request_threaded_irq(twl6040->dev, twl6040->irq_th, NULL,
 				   twl6040_thint_handler, IRQF_ONESHOT,
 				   "twl6040_irq_th", twl6040);
 	if (ret) {
@@ -681,18 +681,13 @@ static int twl6040_probe(struct i2c_client *client,
 	return 0;
 
 mfd_err:
-	free_irq(twl6040->irq_th, twl6040);
+	devm_free_irq(&client->dev, twl6040->irq_th, twl6040);
 thirq_err:
-	free_irq(twl6040->irq_ready, twl6040);
+	devm_free_irq(&client->dev, twl6040->irq_ready, twl6040);
 readyirq_err:
 	regmap_del_irq_chip(twl6040->irq, twl6040->irq_data);
-irq_init_err:
-	if (gpio_is_valid(twl6040->audpwron))
-		gpio_free(twl6040->audpwron);
 gpio_err:
 	regulator_bulk_disable(TWL6040_NUM_SUPPLIES, twl6040->supplies);
-power_err:
-	regulator_bulk_free(TWL6040_NUM_SUPPLIES, twl6040->supplies);
 regulator_get_err:
 	i2c_set_clientdata(client, NULL);
 err:
@@ -706,18 +701,14 @@ static int twl6040_remove(struct i2c_client *client)
 	if (twl6040->power_count)
 		twl6040_power(twl6040, 0);
 
-	if (gpio_is_valid(twl6040->audpwron))
-		gpio_free(twl6040->audpwron);
-
-	free_irq(twl6040->irq_ready, twl6040);
-	free_irq(twl6040->irq_th, twl6040);
+	devm_free_irq(&client->dev, twl6040->irq_ready, twl6040);
+	devm_free_irq(&client->dev, twl6040->irq_th, twl6040);
 	regmap_del_irq_chip(twl6040->irq, twl6040->irq_data);
 
 	mfd_remove_devices(&client->dev);
 	i2c_set_clientdata(client, NULL);
 
 	regulator_bulk_disable(TWL6040_NUM_SUPPLIES, twl6040->supplies);
-	regulator_bulk_free(TWL6040_NUM_SUPPLIES, twl6040->supplies);
 
 	return 0;
 }
-- 
1.7.2.5

[PATCH V2 7/9] mfd: ezx-pcap: use devm_*() functions

[Jingoo Han]

Use devm_*() functions to make cleanup paths more simple.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
---
Changes since v1:
- Use devm_free_irq()

 drivers/mfd/ezx-pcap.c |   17 +++++++----------
 1 files changed, 7 insertions(+), 10 deletions(-)

diff --git a/drivers/mfd/ezx-pcap.c b/drivers/mfd/ezx-pcap.c
index b7a61f0..f83cc3d 100644
--- a/drivers/mfd/ezx-pcap.c
+++ b/drivers/mfd/ezx-pcap.c
@@ -403,7 +403,7 @@ static int ezx_pcap_remove(struct spi_device *spi)
 	/* cleanup ADC */
 	adc_irq = pcap_to_irq(pcap, (pdata->config & PCAP_SECOND_PORT) ?
 				PCAP_IRQ_ADCDONE2 : PCAP_IRQ_ADCDONE);
-	free_irq(adc_irq, pcap);
+	devm_free_irq(&spi->dev, adc_irq, pcap);
 	mutex_lock(&pcap->adc_mutex);
 	for (i = 0; i < PCAP_ADC_MAXQ; i++)
 		kfree(pcap->adc_queue[i]);
@@ -415,8 +415,6 @@ static int ezx_pcap_remove(struct spi_device *spi)
 
 	destroy_workqueue(pcap->workqueue);
 
-	kfree(pcap);
-
 	return 0;
 }
 
@@ -431,7 +429,7 @@ static int ezx_pcap_probe(struct spi_device *spi)
 	if (!pdata)
 		goto ret;
 
-	pcap = kzalloc(sizeof(*pcap), GFP_KERNEL);
+	pcap = devm_kzalloc(&spi->dev, sizeof(*pcap), GFP_KERNEL);
 	if (!pcap) {
 		ret = -ENOMEM;
 		goto ret;
@@ -448,7 +446,7 @@ static int ezx_pcap_probe(struct spi_device *spi)
 	spi->mode = SPI_MODE_0 | (pdata->config & PCAP_CS_AH ? SPI_CS_HIGH : 0);
 	ret = spi_setup(spi);
 	if (ret)
-		goto free_pcap;
+		goto ret;
 
 	pcap->spi = spi;
 
@@ -458,7 +456,7 @@ static int ezx_pcap_probe(struct spi_device *spi)
 	if (!pcap->workqueue) {
 		ret = -ENOMEM;
 		dev_err(&spi->dev, "can't create pcap thread\n");
-		goto free_pcap;
+		goto ret;
 	}
 
 	/* redirect interrupts to AP, except adcdone2 */
@@ -491,7 +489,8 @@ static int ezx_pcap_probe(struct spi_device *spi)
 	adc_irq = pcap_to_irq(pcap, (pdata->config & PCAP_SECOND_PORT) ?
 					PCAP_IRQ_ADCDONE2 : PCAP_IRQ_ADCDONE);
 
-	ret = request_irq(adc_irq, pcap_adc_irq, 0, "ADC", pcap);
+	ret = devm_request_irq(&spi->dev, adc_irq, pcap_adc_irq, 0, "ADC",
+				pcap);
 	if (ret)
 		goto free_irqchip;
 
@@ -511,14 +510,12 @@ static int ezx_pcap_probe(struct spi_device *spi)
 remove_subdevs:
 	device_for_each_child(&spi->dev, NULL, pcap_remove_subdev);
 /* free_adc: */
-	free_irq(adc_irq, pcap);
+	devm_free_irq(&spi->dev, adc_irq, pcap);
 free_irqchip:
 	for (i = pcap->irq_base; i < (pcap->irq_base + PCAP_NIRQS); i++)
 		irq_set_chip_and_handler(i, NULL, NULL);
 /* destroy_workqueue: */
 	destroy_workqueue(pcap->workqueue);
-free_pcap:
-	kfree(pcap);
 ret:
 	return ret;
 }
-- 
1.7.2.5

[PATCH V2 8/9] mfd: da903x: use devm_*() functions

[Jingoo Han]

Use devm_*() functions to make cleanup paths more simple.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
---
No changes since v1:

 drivers/mfd/da903x.c |   19 ++++++-------------
 1 files changed, 6 insertions(+), 13 deletions(-)

diff --git a/drivers/mfd/da903x.c b/drivers/mfd/da903x.c
index 05176cd..f1a316e 100644
--- a/drivers/mfd/da903x.c
+++ b/drivers/mfd/da903x.c
@@ -499,7 +499,8 @@ static int da903x_probe(struct i2c_client *client,
 	unsigned int tmp;
 	int ret;
 
-	chip = kzalloc(sizeof(struct da903x_chip), GFP_KERNEL);
+	chip = devm_kzalloc(&client->dev, sizeof(struct da903x_chip),
+				GFP_KERNEL);
 	if (chip == NULL)
 		return -ENOMEM;
 
@@ -515,33 +516,27 @@ static int da903x_probe(struct i2c_client *client,
 
 	ret = chip->ops->init_chip(chip);
 	if (ret)
-		goto out_free_chip;
+		return ret;
 
 	/* mask and clear all IRQs */
 	chip->events_mask = 0xffffffff;
 	chip->ops->mask_events(chip, chip->events_mask);
 	chip->ops->read_events(chip, &tmp);
 
-	ret = request_irq(client->irq, da903x_irq_handler,
+	ret = devm_request_irq(&client->dev, client->irq, da903x_irq_handler,
 			IRQF_TRIGGER_FALLING,
 			"da903x", chip);
 	if (ret) {
 		dev_err(&client->dev, "failed to request irq %d\n",
 				client->irq);
-		goto out_free_chip;
+		return ret;
 	}
 
 	ret = da903x_add_subdevs(chip, pdata);
 	if (ret)
-		goto out_free_irq;
+		return ret;
 
 	return 0;
-
-out_free_irq:
-	free_irq(client->irq, chip);
-out_free_chip:
-	kfree(chip);
-	return ret;
 }
 
 static int da903x_remove(struct i2c_client *client)
@@ -549,8 +544,6 @@ static int da903x_remove(struct i2c_client *client)
 	struct da903x_chip *chip = i2c_get_clientdata(client);
 
 	da903x_remove_subdevs(chip);
-	free_irq(client->irq, chip);
-	kfree(chip);
 	return 0;
 }
 
-- 
1.7.2.5

[PATCH V2 9/9] mfd: tc3589x: use devm_*() functions

[Jingoo Han]

Use devm_*() functions to make cleanup paths more simple.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
---
No changes since v1:

 drivers/mfd/tc3589x.c |   21 ++++++---------------
 1 files changed, 6 insertions(+), 15 deletions(-)

diff --git a/drivers/mfd/tc3589x.c b/drivers/mfd/tc3589x.c
index ecc092c..4cb92bb 100644
--- a/drivers/mfd/tc3589x.c
+++ b/drivers/mfd/tc3589x.c
@@ -350,7 +350,8 @@ static int tc3589x_probe(struct i2c_client *i2c,
 				     | I2C_FUNC_SMBUS_I2C_BLOCK))
 		return -EIO;
 
-	tc3589x = kzalloc(sizeof(struct tc3589x), GFP_KERNEL);
+	tc3589x = devm_kzalloc(&i2c->dev, sizeof(struct tc3589x),
+				GFP_KERNEL);
 	if (!tc3589x)
 		return -ENOMEM;
 
@@ -366,33 +367,27 @@ static int tc3589x_probe(struct i2c_client *i2c,
 
 	ret = tc3589x_chip_init(tc3589x);
 	if (ret)
-		goto out_free;
+		return ret;
 
 	ret = tc3589x_irq_init(tc3589x, np);
 	if (ret)
-		goto out_free;
+		return ret;
 
 	ret = request_threaded_irq(tc3589x->i2c->irq, NULL, tc3589x_irq,
 				   IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
 				   "tc3589x", tc3589x);
 	if (ret) {
 		dev_err(tc3589x->dev, "failed to request IRQ: %d\n", ret);
-		goto out_free;
+		return ret;
 	}
 
 	ret = tc3589x_device_init(tc3589x);
 	if (ret) {
 		dev_err(tc3589x->dev, "failed to add child devices\n");
-		goto out_freeirq;
+		return ret;
 	}
 
 	return 0;
-
-out_freeirq:
-	free_irq(tc3589x->i2c->irq, tc3589x);
-out_free:
-	kfree(tc3589x);
-	return ret;
 }
 
 static int tc3589x_remove(struct i2c_client *client)
@@ -401,10 +396,6 @@ static int tc3589x_remove(struct i2c_client *client)
 
 	mfd_remove_devices(tc3589x->dev);
 
-	free_irq(tc3589x->i2c->irq, tc3589x);
-
-	kfree(tc3589x);
-
 	return 0;
 }
 
-- 
1.7.2.5

Re: [PATCH V2 1/9] mfd: 88pm860x: drop devm_kfree of devm_kzalloc'd data

[Samuel Ortiz]

Hi Jingoo,

On Wed, Feb 20, 2013 at 06:27:21PM +0900, Jingoo Han wrote:
> devm_kfree() allocates memory that is released when a driver detaches.
> Thus, there is no reason to explicitly call devm_kfree() in probe or remove
> functions.
> 
> Signed-off-by: Jingoo Han <jg1.han@samsung.com>
> ---
> No changes since v1:
> 
>  drivers/mfd/88pm860x-core.c |   12 +++---------
>  1 files changed, 3 insertions(+), 9 deletions(-)
All 9 patches applied to mfd-next, thanks.

Cheers,
Samuel.

-- 
Intel Open Source Technology Centre
http://oss.intel.com/