* 2.4.19 and 2.4.20-pre1 don't boot
@ 2002-08-12 18:46 Peter Klotz
2002-08-12 18:55 ` Alan Cox
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Peter Klotz @ 2002-08-12 18:46 UTC (permalink / raw)
To: linux-kernel
Hi
Up to 2.4.19-rc1 my system worked fine but 2.4.19 and 2.4.20-pre1 produce
the following message at startup:
Mounting root filesystem
ide-floppy driver 0.99.newide
kmod: failed to exec /sbin/modprobe -s -k ide-cd, errno = 2
hda: driver not present
mount: error 6 mounting ext3
pivotroot: pivot_root(/sysroot,/sysroot/initrd) failed: 2
Freeing unused kernel memory: 108k freed
Kernel panic: No init found. Try passing init= option to kernel.
I have no idea what causes the problem since I did not change the kernel
configuration.
The system configuration is as follows:
Athlon XP 1600+
Asus A7V266-E (VIA KT266A)
512MB RAM
hda, hdc are IDE Harddisks
Any suggestions welcome.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: 2.4.19 and 2.4.20-pre1 don't boot
2002-08-12 18:46 2.4.19 and 2.4.20-pre1 don't boot Peter Klotz
@ 2002-08-12 18:55 ` Alan Cox
2002-08-12 20:18 ` Peter Klotz
2002-08-12 20:55 ` Adrian Bunk
2002-08-13 2:56 ` Bill Davidsen
2 siblings, 1 reply; 6+ messages in thread
From: Alan Cox @ 2002-08-12 18:55 UTC (permalink / raw)
To: Peter Klotz; +Cc: linux-kernel
On Mon, 2002-08-12 at 19:46, Peter Klotz wrote:
> Hi
>
> Up to 2.4.19-rc1 my system worked fine but 2.4.19 and 2.4.20-pre1 produce
> the following message at startup:
>
> Mounting root filesystem
> ide-floppy driver 0.99.newide
> kmod: failed to exec /sbin/modprobe -s -k ide-cd, errno = 2
> hda: driver not present
Compile in hard disk support
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: 2.4.19 and 2.4.20-pre1 don't boot
2002-08-12 18:55 ` Alan Cox
@ 2002-08-12 20:18 ` Peter Klotz
0 siblings, 0 replies; 6+ messages in thread
From: Peter Klotz @ 2002-08-12 20:18 UTC (permalink / raw)
To: Alan Cox; +Cc: linux-kernel
> > Up to 2.4.19-rc1 my system worked fine but 2.4.19 and 2.4.20-pre1
produce
> > the following message at startup:
> >
> > Mounting root filesystem
> > ide-floppy driver 0.99.newide
> > kmod: failed to exec /sbin/modprobe -s -k ide-cd, errno = 2
> > hda: driver not present
>
> Compile in hard disk support
>
Both options below are set to "yes" in the kernel configuration:
Enhanced IDE/MFM/RLL disk/cdrom/tape/floppy support
Include IDE/ATA-2 DISK support
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: 2.4.19 and 2.4.20-pre1 don't boot
2002-08-12 18:46 2.4.19 and 2.4.20-pre1 don't boot Peter Klotz
2002-08-12 18:55 ` Alan Cox
@ 2002-08-12 20:55 ` Adrian Bunk
2002-08-13 5:33 ` Peter Klotz
2002-08-13 2:56 ` Bill Davidsen
2 siblings, 1 reply; 6+ messages in thread
From: Adrian Bunk @ 2002-08-12 20:55 UTC (permalink / raw)
To: Peter Klotz; +Cc: linux-kernel
On Mon, 12 Aug 2002, Peter Klotz wrote:
> Hi
Hi Peter,
> Up to 2.4.19-rc1 my system worked fine but 2.4.19 and 2.4.20-pre1 produce
> the following message at startup:
>
> Mounting root filesystem
> ide-floppy driver 0.99.newide
> kmod: failed to exec /sbin/modprobe -s -k ide-cd, errno = 2
> hda: driver not present
> mount: error 6 mounting ext3
> pivotroot: pivot_root(/sysroot,/sysroot/initrd) failed: 2
> Freeing unused kernel memory: 108k freed
> Kernel panic: No init found. Try passing init= option to kernel.
>
> I have no idea what causes the problem since I did not change the kernel
> configuration.
>
> The system configuration is as follows:
> Athlon XP 1600+
> Asus A7V266-E (VIA KT266A)
> 512MB RAM
> hda, hdc are IDE Harddisks
>
> Any suggestions welcome.
what type of IDE controller is in this machine?
Is there any other error message above the startup message you quoted?
cu
Adrian
--
You only think this is a free country. Like the US the UK spends a lot of
time explaining its a free country because its a police state.
Alan Cox
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: 2.4.19 and 2.4.20-pre1 don't boot
2002-08-12 18:46 2.4.19 and 2.4.20-pre1 don't boot Peter Klotz
2002-08-12 18:55 ` Alan Cox
2002-08-12 20:55 ` Adrian Bunk
@ 2002-08-13 2:56 ` Bill Davidsen
2 siblings, 0 replies; 6+ messages in thread
From: Bill Davidsen @ 2002-08-13 2:56 UTC (permalink / raw)
To: Peter Klotz; +Cc: linux-kernel
On Mon, 12 Aug 2002, Peter Klotz wrote:
> Up to 2.4.19-rc1 my system worked fine but 2.4.19 and 2.4.20-pre1 produce
> the following message at startup:
>
> Mounting root filesystem
> ide-floppy driver 0.99.newide
> kmod: failed to exec /sbin/modprobe -s -k ide-cd, errno = 2
> hda: driver not present
> mount: error 6 mounting ext3
> pivotroot: pivot_root(/sysroot,/sysroot/initrd) failed: 2
> Freeing unused kernel memory: 108k freed
> Kernel panic: No init found. Try passing init= option to kernel.
If you have multiple controllers one possible source is that the
controllers are being identified in the wrong order. This is an
enhancement in 2.4.19.
--
bill davidsen <davidsen@tmr.com>
CTO, TMR Associates, Inc
Doing interesting things with little computers since 1979.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: 2.4.19 and 2.4.20-pre1 don't boot
2002-08-12 20:55 ` Adrian Bunk
@ 2002-08-13 5:33 ` Peter Klotz
0 siblings, 0 replies; 6+ messages in thread
From: Peter Klotz @ 2002-08-13 5:33 UTC (permalink / raw)
To: Adrian Bunk; +Cc: linux-kernel
> > The system configuration is as follows:
> > Athlon XP 1600+
> > Asus A7V266-E (VIA KT266A)
> > 512MB RAM
> > hda, hdc are IDE Harddisks
> what type of IDE controller is in this machine?
The machine has 2 IDE controllers, the standard onboard controller of the
VIA chipset and an onboard Promise IDE Chip which can be switched to RAID0/1
mode. I use the Promise controller in standard IDE mode.
A DVD-ROM and a CD-Writer are connected to the Promise chip as hde and hdg.
> Is there any other error message above the startup message you quoted?
No, there are no other error messages prior to the extracted one.
Best regards, Peter.
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2002-08-13 5:27 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2002-08-12 18:46 2.4.19 and 2.4.20-pre1 don't boot Peter Klotz
2002-08-12 18:55 ` Alan Cox
2002-08-12 20:18 ` Peter Klotz
2002-08-12 20:55 ` Adrian Bunk
2002-08-13 5:33 ` Peter Klotz
2002-08-13 2:56 ` Bill Davidsen
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®