2.4.19-pre8 ide bugs

2.4.19-pre8 ide bugs

[Nick Evgeniev]

Hi,

I've got the following problem with 2.4.19-pre8 &
ide-2.4.19-p7.all.convert.10.patch (w/o patch & I've more fatal problems
with sb & filesystem corruptions) kernel reports "kernel: bug: kernel timer
added twice at c01a7356." & panics.

Is it a known issue? What is the solution??? I remember that with 2.4.7 I
didn't have any ide errors... but it had reiserfs bugs...
Are there light at the end of ide nightmare?

Here is log:
>-------------------------------
May 24 12:19:48 vzhik kernel: hdg: drive_cmd: status=0xd0 { Busy }
May 24 12:19:48 vzhik kernel:
May 24 12:19:48 vzhik kernel: hdg: status timeout: status=0xd0 { Busy }
May 24 12:19:48 vzhik kernel:
May 24 12:19:49 vzhik kernel: hdg: DMA disabled
May 24 12:19:49 vzhik kernel: ide3: reset: success
May 24 12:19:49 vzhik kernel: PDC202XX: Secondary channel reset.
May 24 12:19:49 vzhik kernel: hdg: drive not ready for command
May 24 12:19:50 vzhik kernel: hde: timeout waiting for DMA
May 24 12:19:50 vzhik kernel: PDC202XX: Primary channel reset.
May 24 12:19:50 vzhik kernel: ide_dmaproc: chipset supported ide_dma_timeout
func only: 16
May 24 12:19:50 vzhik kernel: hde: dma_intr: status=0x51 { DriveReady
SeekComplete Error }
May 24 12:19:50 vzhik kernel: hde: dma_intr: error=0x84 { DriveStatusError
BadCRC }
May 24 12:19:50 vzhik kernel: hde: dma_intr: status=0x51 { DriveReady
SeekComplete Error }
May 24 12:19:50 vzhik kernel: hde: dma_intr: error=0x84 { DriveStatusError
BadCRC }
May 24 12:19:50 vzhik kernel: hde: timeout waiting for DMA
May 24 12:19:50 vzhik kernel: PDC202XX: Primary channel reset.
May 24 12:19:50 vzhik kernel: ide_dmaproc: chipset supported ide_dma_timeout
func only: 16
May 24 12:19:50 vzhik kernel: hde: status timeout: status=0xd1 { Busy }
May 24 12:19:50 vzhik kernel:
May 24 12:19:50 vzhik kernel: PDC202XX: Primary channel reset.
May 24 12:19:50 vzhik kernel: hde: drive not ready for command
May 24 12:19:50 vzhik kernel: ide2: reset: success
May 24 12:24:24 vzhik kernel: hdg: ide_set_handler: handler not null;
old=c01a5234, new=c01a5234
May 24 12:24:24 vzhik kernel: bug: kernel timer added twice at c01a7356.

Re: 2.4.19-pre8 ide bugs

[Alan Cox]

> I've got the following problem with 2.4.19-pre8 &
> ide-2.4.19-p7.all.convert.10.patch (w/o patch & I've more fatal problems
> with sb & filesystem corruptions) kernel reports "kernel: bug: kernel timer
> added twice at c01a7356." & panics.
> 
> Is it a known issue? What is the solution??? I remember that with 2.4.7 I

Does this happen with the up to date IDE code (2.4.19-pre8-ac5 ?). Also
what drives do you have ?

Re: 2.4.19-pre8 ide bugs

[Nick Evgeniev]

----- Original Message -----
From: "Alan Cox" <alan@lxorguk.ukuu.org.uk>
To: <nick@octet.spb.ru>
Cc: <linux-kernel@vger.kernel.org>
Sent: Friday, May 24, 2002 7:35 PM
Subject: Re: 2.4.19-pre8 ide bugs


> > I've got the following problem with 2.4.19-pre8 &
> > ide-2.4.19-p7.all.convert.10.patch (w/o patch & I've more fatal problems
> > with sb & filesystem corruptions) kernel reports "kernel: bug: kernel
timer
> > added twice at c01a7356." & panics.
> >
> > Is it a known issue? What is the solution??? I remember that with 2.4.7
I
>
> Does this happen with the up to date IDE code (2.4.19-pre8-ac5 ?). Also
> what drives do you have ?

2.4.19-pre8-ac5 works for last 13 hours, but I still have ide related errors
in logs:
>---------------------
May 25 04:06:56 vzhik kernel: hdg: drive_cmd: status=0xd0 { Busy }
May 25 04:06:56 vzhik kernel:
May 25 04:06:56 vzhik kernel: hdg: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
May 25 04:06:56 vzhik kernel:
May 25 04:06:56 vzhik kernel: hdg: drive not ready for command
May 25 04:06:57 vzhik kernel: hdg: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
May 25 04:06:57 vzhik kernel:
May 25 04:06:57 vzhik kernel: hdg: drive not ready for command
>--------------------

My config is --
dual piii box (ide config follows). Also I should notice that problems that
I have occured only with  udma 100 drives attached to promise IDE controller
(I have raid0 with lvm1.1rc1 on it). And I DON'T HAVE IDE_TASKFILE option
enabled.

May 25 01:36:48 vzhik kernel: Uniform Multi-Platform E-IDE driver Revision:
6.31
May 25 01:36:48 vzhik kernel: ide: Assuming 33MHz system bus speed for PIO
modes; override with idebus=xx
May 25 01:36:48 vzhik kernel: VP_IDE: IDE controller on PCI bus 00 dev 39
May 25 01:36:48 vzhik kernel: VP_IDE: chipset revision 16
May 25 01:36:48 vzhik kernel: VP_IDE: not 100%% native mode: will probe irqs
later
May 25 01:36:48 vzhik kernel: ide: Assuming 33MHz system bus speed for PIO
modes; override with idebus=xx
May 25 01:36:48 vzhik kernel: VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66
controller on pci00:07.1
May 25 01:36:48 vzhik kernel:     ide0: BM-DMA at 0x9000-0x9007, BIOS
settings: hda:pio, hdb:DMA
May 25 01:36:48 vzhik kernel:     ide1: BM-DMA at 0x9008-0x900f, BIOS
settings: hdc:pio, hdd:pio
May 25 01:36:48 vzhik kernel: PDC20265: IDE controller on PCI bus 00 dev 60
May 25 01:36:48 vzhik kernel: PDC20265: chipset revision 2
May 25 01:36:48 vzhik kernel: PDC20265: not 100%% native mode: will probe
irqs later
May 25 01:36:48 vzhik kernel: PDC20265: (U)DMA Burst Bit ENABLED Primary PCI
Mode Secondary PCI Mode.
May 25 01:36:48 vzhik kernel:     ide2: BM-DMA at 0xbc00-0xbc07, BIOS
settings: hde:DMA, hdf:pio
May 25 01:36:48 vzhik kernel:     ide3: BM-DMA at 0xbc08-0xbc0f, BIOS
settings: hdg:DMA, hdh:pio
May 25 01:36:48 vzhik kernel: hdb: FUJITSU MPG3409AH EF, ATA DISK drive
May 25 01:36:48 vzhik kernel: hde: FUJITSU MPG3204AH, ATA DISK drive
May 25 01:36:48 vzhik kernel: hdg: FUJITSU MPG3204AH, ATA DISK drive
May 25 01:36:48 vzhik kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
May 25 01:36:48 vzhik kernel: ide2 at 0xac00-0xac07,0xb002 on irq 18
May 25 01:36:48 vzhik kernel: ide3 at 0xb400-0xb407,0xb802 on irq 18
May 25 01:36:48 vzhik kernel: hdb: host protected area => 1
May 25 01:36:48 vzhik kernel: hdb: 80063424 sectors (40992 MB) w/2048KiB
Cache, CHS=4983/255/63, UDMA(33)
May 25 01:36:48 vzhik kernel: hde: host protected area => 1
May 25 01:36:48 vzhik kernel: hde: 40031712 sectors (20496 MB) w/2048KiB
Cache, CHS=39714/16/63, UDMA(100)
May 25 01:36:48 vzhik kernel: hdg: host protected area => 1
May 25 01:36:48 vzhik kernel: hdg: 40031712 sectors (20496 MB) w/2048KiB
Cache, CHS=39714/16/63, UDMA(100)
May 25 01:36:48 vzhik kernel: Partition check:
May 25 01:36:48 vzhik kernel:  hdb: hdb1
May 25 01:36:48 vzhik kernel:  hde: hde1 < hde5 hde6 hde7 >
May 25 01:36:48 vzhik kernel:  hdg: hdg1 < hdg5 hdg6 >

Re: 2.4.19-pre8 ide bugs

[Andre Hedrick]

Obviously you have not enable taskfile IO, if you have then you have my
attention.  You are running the legacy code which the talented king
pengiun screwed, and now is return back into 2.5.

Cheers,

On Fri, 24 May 2002, Nick Evgeniev wrote:

> Hi,
> 
> I've got the following problem with 2.4.19-pre8 &
> ide-2.4.19-p7.all.convert.10.patch (w/o patch & I've more fatal problems
> with sb & filesystem corruptions) kernel reports "kernel: bug: kernel timer
> added twice at c01a7356." & panics.
> 
> Is it a known issue? What is the solution??? I remember that with 2.4.7 I
> didn't have any ide errors... but it had reiserfs bugs...
> Are there light at the end of ide nightmare?
> 
> Here is log:
> >-------------------------------
> May 24 12:19:48 vzhik kernel: hdg: drive_cmd: status=0xd0 { Busy }
> May 24 12:19:48 vzhik kernel:
> May 24 12:19:48 vzhik kernel: hdg: status timeout: status=0xd0 { Busy }
> May 24 12:19:48 vzhik kernel:
> May 24 12:19:49 vzhik kernel: hdg: DMA disabled
> May 24 12:19:49 vzhik kernel: ide3: reset: success
> May 24 12:19:49 vzhik kernel: PDC202XX: Secondary channel reset.
> May 24 12:19:49 vzhik kernel: hdg: drive not ready for command
> May 24 12:19:50 vzhik kernel: hde: timeout waiting for DMA
> May 24 12:19:50 vzhik kernel: PDC202XX: Primary channel reset.
> May 24 12:19:50 vzhik kernel: ide_dmaproc: chipset supported ide_dma_timeout
> func only: 16
> May 24 12:19:50 vzhik kernel: hde: dma_intr: status=0x51 { DriveReady
> SeekComplete Error }
> May 24 12:19:50 vzhik kernel: hde: dma_intr: error=0x84 { DriveStatusError
> BadCRC }
> May 24 12:19:50 vzhik kernel: hde: dma_intr: status=0x51 { DriveReady
> SeekComplete Error }
> May 24 12:19:50 vzhik kernel: hde: dma_intr: error=0x84 { DriveStatusError
> BadCRC }
> May 24 12:19:50 vzhik kernel: hde: timeout waiting for DMA
> May 24 12:19:50 vzhik kernel: PDC202XX: Primary channel reset.
> May 24 12:19:50 vzhik kernel: ide_dmaproc: chipset supported ide_dma_timeout
> func only: 16
> May 24 12:19:50 vzhik kernel: hde: status timeout: status=0xd1 { Busy }
> May 24 12:19:50 vzhik kernel:
> May 24 12:19:50 vzhik kernel: PDC202XX: Primary channel reset.
> May 24 12:19:50 vzhik kernel: hde: drive not ready for command
> May 24 12:19:50 vzhik kernel: ide2: reset: success
> May 24 12:24:24 vzhik kernel: hdg: ide_set_handler: handler not null;
> old=c01a5234, new=c01a5234
> May 24 12:24:24 vzhik kernel: bug: kernel timer added twice at c01a7356.
> 
> 
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
> 

Andre Hedrick
LAD Storage Consulting Group

Re: 2.4.19-pre8 ide bugs

[Matthias Andree]

On Fri, 24 May 2002, Andre Hedrick wrote:

> Obviously you have not enable taskfile IO, if you have then you have my
> attention.  You are running the legacy code which the talented king
> pengiun screwed, and now is return back into 2.5.

How stable is the Taskfile stuff in 2.4.19-pre8-ac5? Good enough for
systems that are in daily use but not production critical? Or will it
eat file systems big time?