* Problem with ZIP drive in 2.4.2-ac20
@ 2001-03-19 16:19 Alexander Sokolov
0 siblings, 0 replies; only message in thread
From: Alexander Sokolov @ 2001-03-19 16:19 UTC (permalink / raw)
To: linux-kernel
Hello,
Just installed a ZIP drive, and got the following error when booting the kernel:
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 21
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:pio, hdd:pio
hda: WDC AC28400R, ATA DISK drive
hdc: IOMEGA ZIP 100 ATAPI Floppy, ATAPI FLOPPY drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 16514064 sectors (8455 MB) w/512KiB Cache, CHS=1027/255/63, UDMA(33)
hdc: 98288kB, 196576 blocks, 512 sector size,
hdc: 98304kB, 96/64/32 CHS, 4096 kBps, 512 sector size, 2941 rpm
ide-floppy: hdc: I/O error, pc = 5a, key = 5, asc = 24, ascq = 0
This annoying error appears each time I try to mount ZIP drive or eject it.
Despite this error, the drive works fine...
--
Alexander Sokolov
System Administrator
Netlink Co. Ltd.
Moscow, Russia
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2001-03-19 16:15 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2001-03-19 16:19 Problem with ZIP drive in 2.4.2-ac20 Alexander Sokolov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®