RE: 2.5.44/2.5.44-mm1 PIIX4 ide oops on boot

RE: 2.5.44/2.5.44-mm1 PIIX4 ide oops on boot

[steve roemen]

i get the same results with Andrew Morton's 2.5.44-mm1 patch

-----Original Message-----
From: steve roemen [mailto:steve.roemen@wcom.com]
Sent: Sunday, October 20, 2002 6:54 PM
To: 'Thomas Molina'
Cc: 'linux-kernel@vger.kernel.org'
Subject: RE: 2.5.44 PIIX4 ide oops on boot


thanks for the tip on ide-cd, but i get a similar oops.

-steve

-----Original Message-----
From: linux-kernel-owner@vger.kernel.org
[mailto:linux-kernel-owner@vger.kernel.org]On Behalf Of Thomas Molina
Sent: Sunday, October 20, 2002 5:59 PM
To: steve roemen
Cc: linux-kernel@vger.kernel.org
Subject: Re: 2.5.44 PIIX4 ide oops on boot


On Sun, 20 Oct 2002, steve roemen wrote:

>
> attached is the oops, the config,  and some info on the box.
>
> ide is only used for the cdrom.
>
> it oopes during bootup.  also, if i remove ide from this kernel, it'll
boot
> on the scsi drive just fine.
>
> 2.4.19 works just fine on this box.

Your config says you have ide-cd configured.  Try taking just ide-cd out
and reboot.  I've found a problem with 2.5.44 and ide-cd on my system
also.  I have a similar oops on boot or module insertion.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/