* DECpc XL 590 -> bios won't set up IRQ's and Linux neither
@ 2002-12-20 17:49 Folkert van Heusden
0 siblings, 0 replies; only message in thread
From: Folkert van Heusden @ 2002-12-20 17:49 UTC (permalink / raw)
To: linux-kernel
Hi,
I have a DECpc XL 590, it's an oldy P90.
When it boots up with Linux, I get the following error:
PCI: PCI BIOS revision 2.00 entry at 0xf0100, last bus=0
PCI: Using configuration type 2
PCI: Probing PCI hardware
PCI: fixing NCR 53C810 class code for 00:01.0
PCI: Error 81 when fetching IRQ routing table. <------------
None of the PCI-devices get an IRQ assigned:
00:07.0 USB Controller: OPTi Inc. 82C861 (rev 10) (prog-if 10 [OHCI])
Subsystem: OPTi Inc. 82C861
Flags: medium devsel
Memory at 10000000 (32-bit, non-prefetchable) [size=4K]
00:08.0 USB Controller: NEC Corporation USB (rev 41) (prog-if 10 [OHCI])
Subsystem: Unknown device 3083:0035
Flags: medium devsel
Memory at 10001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
<etc.>
I tried booting with pci=biosirq, to no avail.
Kernel is 2.4.20.
Is this a non-fixable bug in the bios? Bug in the kernel? Anything?
Thank you.
Folkert
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2002-12-20 17:41 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2002-12-20 17:49 DECpc XL 590 -> bios won't set up IRQ's and Linux neither Folkert van Heusden
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome