mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [RESEND PATCH 0/1] arm64: dts: Add Variscite DART-SD410 Evaluation board dts
@ 2017-08-13  9:42 Leonid Segal
  0 siblings, 0 replies; only message in thread
From: Leonid Segal @ 2017-08-13  9:42 UTC (permalink / raw)
  To: robh+dt, mark.rutland, devicetree
  Cc: david.brown, andy.gross, catalin.marinas, will.deacon,
	linux-arm-msm, linux-soc, linux-arm-kernel, linux-kernel,
	'Leonid Segal'

Add initial device tree support for Variscite DART-SD410 Evalueation board.
This board is also known as VAR-SD410CustomBoard.

checkpatch.pl gives warnings for some lines that are over 80 characters,
but I decided not to change them since similar lines in other dts files.

Patch has been tested on 96Boards Dragonboard410c and Variscite
SD410Customboard
Both Linaro Linux 17.06 release
https://discuss.96boards.org/t/linaro-linux-17-06-releases/2217


Signed-off-by: Leonid Segal <leonid.s@variscite.com>
---
 arch/arm64/boot/dts/qcom/Makefile                  |   1 +
 .../boot/dts/qcom/apq8016-var-dart-pmic-pins.dtsi  |  53 +++
 .../boot/dts/qcom/apq8016-var-dart-soc-pins.dtsi   |  88 ++++
 arch/arm64/boot/dts/qcom/apq8016-var-dart.dts      |  21 +
 arch/arm64/boot/dts/qcom/apq8016-var-dart.dtsi     | 525
+++++++++++++++++++++
 5 files changed, 688 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/apq8016-var-dart-pmic-pins.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/apq8016-var-dart-soc-pins.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/apq8016-var-dart.dts
 create mode 100644 arch/arm64/boot/dts/qcom/apq8016-var-dart.dtsi
 
-- 
2.13.0

^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2017-08-13  9:43 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-08-13  9:42 [RESEND PATCH 0/1] arm64: dts: Add Variscite DART-SD410 Evaluation board dts Leonid Segal

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®