aRTS vs 2.6.3-rc1, aRTS loses

aRTS vs 2.6.3-rc1, aRTS loses

[Gene Heskett]

Greetings;

On rebooting to 2.6.3-rc1, I get a failed advisory from aRTS that I 
didn't get with 2.6.2.

Is this a known problem?  FWIW, things like tvtime continue to make 
sound ok.

-- 
Cheers, Gene
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
99.22% setiathome rank, not too shabby for a WV hillbilly
Yahoo.com attornies please note, additions to this message
by Gene Heskett are:
Copyright 2004 by Maurice Eugene Heskett, all rights reserved.

Re: aRTS vs 2.6.3-rc1, aRTS loses

[Gene Heskett]

On Saturday 07 February 2004 06:31, Gene Heskett wrote:
>Greetings;
>
>On rebooting to 2.6.3-rc1, I get a failed advisory from aRTS that I
>didn't get with 2.6.2.
>
>Is this a known problem?  FWIW, things like tvtime continue to make
>sound ok.

Must be a known operator problem, I just rebuilt it from the 
2.6.2 .config + a make oldconfig, and its all working again.

-- 
Cheers, Gene
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
99.22% setiathome rank, not too shabby for a WV hillbilly
Yahoo.com attornies please note, additions to this message
by Gene Heskett are:
Copyright 2004 by Maurice Eugene Heskett, all rights reserved.

RE: aRTS vs 2.6.3-rc1, aRTS loses

[Steve Lee]

I'm having the same problem you described in your original message.  I
built 2.6.3-rc1 as you described here, ".config + a make oldconfig" but
arts dies with a message saying, "Sound server error, CPU overload".  I
click OK, but about 30 seconds later it says the same thing again.  This
is with KDE 3.2 all compiled from sources with GCC 3.3.2.  I boot under
2.6.2 and everything works well again.  I did notice that the sound
config file saved by doing "alsactl store" under 2.6.2 is not compatible
with that of the 2.6.3-rc1 kernel or versus.  If anyone else has any
ideas, I'm interested.  I was really hoping this kernel would solve some
issues I was seeing with 2.6.2.

Thanks,
Steve


-----Original Message-----
From: Gene Heskett [mailto:gene.heskett@verizon.net] 
Sent: Saturday, February 07, 2004 5:48 AM
To: linux-kernel@vger.kernel.org
Subject: Re: aRTS vs 2.6.3-rc1, aRTS loses

On Saturday 07 February 2004 06:31, Gene Heskett wrote:
>Greetings;
>
>On rebooting to 2.6.3-rc1, I get a failed advisory from aRTS that I
>didn't get with 2.6.2.
>
>Is this a known problem?  FWIW, things like tvtime continue to make
>sound ok.

Must be a known operator problem, I just rebuilt it from the 
2.6.2 .config + a make oldconfig, and its all working again.

-- 
Cheers, Gene
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
99.22% setiathome rank, not too shabby for a WV hillbilly
Yahoo.com attornies please note, additions to this message
by Gene Heskett are:
Copyright 2004 by Maurice Eugene Heskett, all rights reserved.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel"
in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

RE: aRTS vs 2.6.3-rc1, aRTS loses

[Eric Sandall]

Quoting Steve Lee <steve@tuxsoft.com>:
> I'm having the same problem you described in your original message.  I
> built 2.6.3-rc1 as you described here, ".config + a make oldconfig" but
> arts dies with a message saying, "Sound server error, CPU overload".  I
> click OK, but about 30 seconds later it says the same thing again.  This
> is with KDE 3.2 all compiled from sources with GCC 3.3.2.  I boot under
> 2.6.2 and everything works well again.  I did notice that the sound
> config file saved by doing "alsactl store" under 2.6.2 is not compatible
> with that of the 2.6.3-rc1 kernel or versus.  If anyone else has any
> ideas, I'm interested.  I was really hoping this kernel would solve some
> issues I was seeing with 2.6.2.
> 
> Thanks,
> Steve

I can verify that this happens with 2.6.2-mm1 as well. KDE 3.2.0, gcc 3.3.2,
glibc 2.3.2+NPTL, all compiled from source (athlon-mp).

-sandalle

-- 
PGP Key Fingerprint:  FCFF 26A1 BE21 08F4 BB91  FAED 1D7B 7D74 A8EF DD61
http://search.keyserver.net:11371/pks/lookup?op=get&search=0xA8EFDD61

-----BEGIN GEEK CODE BLOCK-----
Version: 3.12
GCS/E/IT$ d-- s++:+>: a-- C++(+++) BL++++VIS>$ P+(++) L+++ E-(---) W++ N+@ o?
K? w++++>-- O M-@ V-- PS+(+++) PE(-) Y++(+) PGP++(+) t+() 5++ X(+) R+(++)
tv(--)b++(+++) DI+@ D++(+++) G>+++ e>+++ h---(++) r++ y+
------END GEEK CODE BLOCK------

Eric Sandall                     |  Source Mage GNU/Linux Developer
eric@sandall.us                  |  http://www.sourcemage.org/
http://eric.sandall.us/          |  SysAdmin @ Inst. Shock Physics @ WSU
http://counter.li.org/  #196285  |  http://www.shock.wsu.edu/

----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.

Re: aRTS vs 2.6.3-rc1, aRTS loses

[Gene Heskett]

[-- Attachment #1: Type: text/plain, Size: 1616 bytes --]

On Sunday 08 February 2004 01:02, Eric Sandall wrote:
>Quoting Steve Lee <steve@tuxsoft.com>:
>> I'm having the same problem you described in your original
>> message.  I built 2.6.3-rc1 as you described here, ".config + a
>> make oldconfig" but arts dies with a message saying, "Sound server
>> error, CPU overload".  I click OK, but about 30 seconds later it
>> says the same thing again.  This is with KDE 3.2 all compiled from
>> sources with GCC 3.3.2.  I boot under 2.6.2 and everything works
>> well again.  I did notice that the sound config file saved by
>> doing "alsactl store" under 2.6.2 is not compatible with that of
>> the 2.6.3-rc1 kernel or versus.  If anyone else has any ideas, I'm
>> interested.  I was really hoping this kernel would solve some
>> issues I was seeing with 2.6.2.
>>
>> Thanks,
>> Steve
>
>I can verify that this happens with 2.6.2-mm1 as well. KDE 3.2.0,
> gcc 3.3.2, glibc 2.3.2+NPTL, all compiled from source (athlon-mp).
>
>-sandalle

I have no idea what I did the second time other than un-module a 
couple of drivers, but its working again here, as near as I can tell, 
everything but printing from kmail.  That gives kmail 1.6.0 a SIGABRT 
tummy ache.

I'll attach my config.gz so those who want to compare, can.

-- 
Cheers, Gene
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
99.22% setiathome rank, not too shabby for a WV hillbilly
Yahoo.com attornies please note, additions to this message
by Gene Heskett are:
Copyright 2004 by Maurice Eugene Heskett, all rights reserved.

[-- Attachment #2: config.gz --]
[-- Type: application/x-gzip, Size: 7045 bytes --]

RE: aRTS vs 2.6.3-rc1, aRTS loses

[Bernhard Rosenkraenzer]

On Sat, 7 Feb 2004, Steve Lee wrote:

> I'm having the same problem you described in your original message.  I
> built 2.6.3-rc1 as you described here, ".config + a make oldconfig" but
> arts dies with a message saying, "Sound server error, CPU overload".

http://bugs.kde.org/show_bug.cgi?id=73461

LLaP
bero

-- 
Ark Linux - Linux for the masses
http://www.arklinux.org/

Redistribution and processing of this message is subject to
http://www.arklinux.org/terms.php