SE7500CW2 motherboard

SE7500CW2 motherboard

[Jason Zebchuk]

Hi,

    I'm having problems with the kernel debugger on a number of machines
with Intel SE7500CW2 motherboards.

    When attempting to enter the debugger, either by pressing "PAUSE" or at
a breakpoint, one of  four things will happen:

    1.  It works as expected.

    2. It reboots.

    3.  It hangs.  ie. input seems to have no effect, no signs of activity,
forced to power down.

    4.  It prints:

            PCI System Error on Bus/Device/Function 00B0h
            PCI Parity Error on Bus/Device/Function 00B0h

        and then continues to function as expected.


    In addition, it also occasionally hangs or reboots after entering the
debugger successfully and using it for a short while.


    I'm using a 2.4.18 kernel, and the problems are only happening on Intel
SE7500CW2 motherboards (ie.  I don't have problems on say an Intel SDS2).

    Has anyone seen any similar problems?  Has anyone had problems using
this motherboard?  Does anyone have any suggestions?

Thanks,

Jason Zebchuk

Re: SE7500CW2 motherboard

[Samuel Flory]

  Try updating to the latest intel bios.  I had a lot of issues with the
keyboard not working, and at least once I swear using it crashed the
system.


PS- I really recommend using the intel SE7500WV2 instead of the CW2. 
It's a bit more in cost, but well worth it if you can afford it.

On Mon, 2002-08-19 at 15:59, Jason Zebchuk wrote:
> Hi,
> 
>     I'm having problems with the kernel debugger on a number of machines
> with Intel SE7500CW2 motherboards.
> 
>     When attempting to enter the debugger, either by pressing "PAUSE" or at
> a breakpoint, one of  four things will happen:
> 
>     1.  It works as expected.
> 
>     2. It reboots.
> 
>     3.  It hangs.  ie. input seems to have no effect, no signs of activity,
> forced to power down.
> 
>     4.  It prints:
> 
>             PCI System Error on Bus/Device/Function 00B0h
>             PCI Parity Error on Bus/Device/Function 00B0h
> 
>         and then continues to function as expected.
> 
> 
>     In addition, it also occasionally hangs or reboots after entering the
> debugger successfully and using it for a short while.
> 
> 
>     I'm using a 2.4.18 kernel, and the problems are only happening on Intel
> SE7500CW2 motherboards (ie.  I don't have problems on say an Intel SDS2).
> 
>     Has anyone seen any similar problems?  Has anyone had problems using
> this motherboard?  Does anyone have any suggestions?
> 
> Thanks,
> 
> Jason Zebchuk
> 
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
>