[PATCH v2 0/4] Describe more hardware of the HTC One (M8)

[PATCH v2 0/4] Describe more hardware of the HTC One (M8)

[Alexandre Messier via B4 Relay]

Add hardware description for these parts of the HTC One (M8):

 - Notification LEDs
 - Bluetooth
 - NFC
 - Touchscreen

Signed-off-by: Alexandre Messier <alex@me.ssier.org>
---
Changes in v2:
- Rebased on top of 7.0-rc6
- In patch 1, change color of one LED from amber to orange.
- In patch 1, use a multicolor LED to represent the logical grouping
  of the LEDs.
- In patches 2 and 4, note in the commit message the usage of same
  I2C bus frequency as the downstream kernel.
- In patch 3, gather Reviewed-by tag from Konrad Dybcio.
- Link to v1: https://lore.kernel.org/r/20251007-m8-dts-additions-v1-0-53d7ab3594e7@me.ssier.org

---
Alexandre Messier (4):
      ARM: dts: qcom: msm8974pro-htc-m8: add status LEDs
      ARM: dts: qcom: msm8974pro-htc-m8: add NFC support
      ARM: dts: qcom: msm8974pro-htc-m8: add Bluetooth pins
      ARM: dts: qcom: msm8974pro-htc-m8: add touchscreen

 arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts | 94 ++++++++++++++++++++++-
 1 file changed, 90 insertions(+), 4 deletions(-)
---
base-commit: 7aaa8047eafd0bd628065b15757d9b48c5f9c07d
change-id: 20251007-m8-dts-additions-ac20291afa24

Best regards,
-- 
Alexandre Messier <alex@me.ssier.org>

[PATCH v2 1/4] ARM: dts: qcom: msm8974pro-htc-m8: add status LEDs

[Alexandre Messier via B4 Relay]

From: Alexandre Messier <alex@me.ssier.org>

Add support for the notification LEDs on the HTC One M8.

Two LEDs are available, one orange and one green. Together,
they both form a single notification source, so use a
multicolor LED node to describe this arrangement.

Cc: Lee Jones <lee@kernel.org>
Cc: Pavel Machek <pavel@kernel.org>
Cc: linux-leds@vger.kernel.org
Signed-off-by: Alexandre Messier <alex@me.ssier.org>
---
 arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts | 25 +++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts
index 402372834c53..37df271dbdeb 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts
@@ -3,6 +3,7 @@
 #include "pm8841.dtsi"
 #include "pm8941.dtsi"
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 
 / {
 	model = "HTC One (M8)";
@@ -64,6 +65,30 @@ vreg_vph_pwr: vreg-vph-pwr {
 	};
 };
 
+&pm8941_lpg {
+	qcom,power-source = <1>;
+
+	status = "okay";
+
+	multi-led {
+		color = <LED_COLOR_ID_MULTI>;
+		function = LED_FUNCTION_STATUS;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@6 {
+			reg = <6>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@7 {
+			reg = <7>;
+			color = <LED_COLOR_ID_ORANGE>;
+		};
+	};
+};
+
 &pm8941_vib {
 	status = "okay";
 };

-- 
2.53.0

Re: [PATCH v2 1/4] ARM: dts: qcom: msm8974pro-htc-m8: add status LEDs

[Konrad Dybcio]

On 4/6/26 7:16 AM, Alexandre Messier via B4 Relay wrote:
> From: Alexandre Messier <alex@me.ssier.org>
> 
> Add support for the notification LEDs on the HTC One M8.
> 
> Two LEDs are available, one orange and one green. Together,
> they both form a single notification source, so use a
> multicolor LED node to describe this arrangement.
> 
> Cc: Lee Jones <lee@kernel.org>
> Cc: Pavel Machek <pavel@kernel.org>
> Cc: linux-leds@vger.kernel.org
> Signed-off-by: Alexandre Messier <alex@me.ssier.org>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad

[PATCH v2 2/4] ARM: dts: qcom: msm8974pro-htc-m8: add NFC support

[Alexandre Messier via B4 Relay]

From: Alexandre Messier <alex@me.ssier.org>

Add the NFC chip used in the HTC One M8 to its device tree.

The downstream vendor kernel used an I2C frequency of 384 kHz
for this bus. Use the same value as the vendor.

Signed-off-by: Alexandre Messier <alex@me.ssier.org>
---
 arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts
index 37df271dbdeb..f24882dbeef3 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts
@@ -65,6 +65,22 @@ vreg_vph_pwr: vreg-vph-pwr {
 	};
 };
 
+&blsp1_i2c3 {
+	clock-frequency = <384000>;
+
+	status = "okay";
+
+	nfc@28 {
+		compatible = "nxp,pn544-i2c";
+		reg = <0x28>;
+
+		interrupts-extended = <&tlmm 144 IRQ_TYPE_LEVEL_HIGH>;
+
+		enable-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+		firmware-gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
+	};
+};
+
 &pm8941_lpg {
 	qcom,power-source = <1>;
 

-- 
2.53.0

Re: [PATCH v2 2/4] ARM: dts: qcom: msm8974pro-htc-m8: add NFC support

[Konrad Dybcio]

On 4/6/26 7:16 AM, Alexandre Messier via B4 Relay wrote:
> From: Alexandre Messier <alex@me.ssier.org>
> 
> Add the NFC chip used in the HTC One M8 to its device tree.
> 
> The downstream vendor kernel used an I2C frequency of 384 kHz
> for this bus. Use the same value as the vendor.
> 
> Signed-off-by: Alexandre Messier <alex@me.ssier.org>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad

[PATCH v2 3/4] ARM: dts: qcom: msm8974pro-htc-m8: add Bluetooth pins

[Alexandre Messier via B4 Relay]

From: Alexandre Messier <alex@me.ssier.org>

Add the required pin configuration to enable Bluetooth.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Alexandre Messier <alex@me.ssier.org>
---
 arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts
index f24882dbeef3..2edf407db567 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts
@@ -354,10 +354,19 @@ cmd-data-pins {
 	};
 
 	wcnss_pin_a: wcnss-pin-active-state {
-		pins = "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
-		function = "wlan";
-		drive-strength = <6>;
-		bias-pull-down;
+		bt-pins {
+			pins = "gpio35", "gpio43", "gpio44";
+			function = "bt";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wlan-pins {
+			pins = "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
+			function = "wlan";
+			drive-strength = <6>;
+			bias-pull-down;
+		};
 	};
 };
 

-- 
2.53.0

[PATCH v2 4/4] ARM: dts: qcom: msm8974pro-htc-m8: add touchscreen

[Alexandre Messier via B4 Relay]

From: Alexandre Messier <alex@me.ssier.org>

Add the touchscreen device node for the HTC One (M8).

The downstream vendor kernel used an I2C frequency of 384 kHz
for this bus. Use the same value as the vendor.

Signed-off-by: Alexandre Messier <alex@me.ssier.org>
---
 arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts | 36 +++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts
index 2edf407db567..66ad93e7dd20 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts
@@ -65,6 +65,35 @@ vreg_vph_pwr: vreg-vph-pwr {
 	};
 };
 
+&blsp1_i2c2 {
+	clock-frequency = <384000>;
+
+	status = "okay";
+
+	touch@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+
+		interrupts-extended = <&tlmm 18 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&ts_int_pin>;
+		pinctrl-names = "default";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f11@11 {
+			reg = <0x11>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
 &blsp1_i2c3 {
 	clock-frequency = <384000>;
 
@@ -353,6 +382,13 @@ cmd-data-pins {
 		};
 	};
 
+	ts_int_pin: ts-int-pin-state {
+		pins = "gpio18";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	wcnss_pin_a: wcnss-pin-active-state {
 		bt-pins {
 			pins = "gpio35", "gpio43", "gpio44";

-- 
2.53.0

Re: [PATCH v2 4/4] ARM: dts: qcom: msm8974pro-htc-m8: add touchscreen

[Konrad Dybcio]

On 4/6/26 7:17 AM, Alexandre Messier via B4 Relay wrote:
> From: Alexandre Messier <alex@me.ssier.org>
> 
> Add the touchscreen device node for the HTC One (M8).
> 
> The downstream vendor kernel used an I2C frequency of 384 kHz
> for this bus. Use the same value as the vendor.
> 
> Signed-off-by: Alexandre Messier <alex@me.ssier.org>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad

Re: [PATCH v2 0/4] Describe more hardware of the HTC One (M8)

[Bjorn Andersson]

On Mon, 06 Apr 2026 01:16:56 -0400, Alexandre Messier wrote:
> Add hardware description for these parts of the HTC One (M8):
> 
>  - Notification LEDs
>  - Bluetooth
>  - NFC
>  - Touchscreen
> 
> [...]

Applied, thanks!

[1/4] ARM: dts: qcom: msm8974pro-htc-m8: add status LEDs
      commit: c11865aa07e8a1b1b3c50b995f7175312a4045a8
[2/4] ARM: dts: qcom: msm8974pro-htc-m8: add NFC support
      commit: 858e8a50ba0c0c9caa45f25dfbbb8b6bb26154b0
[3/4] ARM: dts: qcom: msm8974pro-htc-m8: add Bluetooth pins
      commit: 132a69d4092737d35470adc0f9c89fc68caf6288
[4/4] ARM: dts: qcom: msm8974pro-htc-m8: add touchscreen
      commit: 811a24b0ec0c3ec74dbe324c390b75a2b92571ea

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>