* [PATCH 0/2] clk: qcom: gcc-shikra: add PWM XO512 source clock
@ 2026-11-16 5:27 Taniya Das
2026-11-16 5:27 ` [PATCH 1/2] dt-bindings: clock: qcom: add Shikra " Taniya Das
2026-11-16 5:27 ` [PATCH 2/2] clk: qcom: gcc-shikra: add " Taniya Das
0 siblings, 2 replies; 5+ messages in thread
From: Taniya Das @ 2026-11-16 5:27 UTC (permalink / raw)
To: Bjorn Andersson, Abel Vesa, Stephen Boyd, Brian Masney,
Jerome Brunet, Rob Herring, Krzysztof Kozlowski, Conor Dooley
Cc: Ajit Pandey, Imran Shaik, Jagadeesh Kona, linux-arm-msm,
linux-clk, devicetree, linux-kernel, Taniya Das
The PWM controller on Qualcomm Shikra SoCs is fed by the GCC PWM XO512
clock, which derives its rate from a programmable divider sitting
between the TCXO and the PWM core output. Model that divider as a
dedicated source clock so the full TCXO -> divider -> PWM output path
is described and the PWM core rate can be configured at runtime.
Add the clock-ID binding and the gcc-shikra divider clock implementing
the source, with the existing PWM output branch reparented onto it.
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
---
Taniya Das (2):
dt-bindings: clock: qcom: add Shikra PWM XO512 source clock
clk: qcom: gcc-shikra: add PWM XO512 source clock
drivers/clk/qcom/gcc-shikra.c | 21 +++++++++++++++++++++
include/dt-bindings/clock/qcom,shikra-gcc.h | 1 +
2 files changed, 22 insertions(+)
---
base-commit: 84abb955b1015477aa11a96e2f3ac1b938b77f48
change-id: 20261116-pwm_clocks_shikra-13081b11413c
Best regards,
--
Taniya Das <taniya.das@oss.qualcomm.com>
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 1/2] dt-bindings: clock: qcom: add Shikra PWM XO512 source clock
2026-11-16 5:27 [PATCH 0/2] clk: qcom: gcc-shikra: add PWM XO512 source clock Taniya Das
@ 2026-11-16 5:27 ` Taniya Das
2026-11-16 5:27 ` [PATCH 2/2] clk: qcom: gcc-shikra: add " Taniya Das
1 sibling, 0 replies; 5+ messages in thread
From: Taniya Das @ 2026-11-16 5:27 UTC (permalink / raw)
To: Bjorn Andersson, Abel Vesa, Stephen Boyd, Brian Masney,
Jerome Brunet, Rob Herring, Krzysztof Kozlowski, Conor Dooley
Cc: Ajit Pandey, Imran Shaik, Jagadeesh Kona, linux-arm-msm,
linux-clk, devicetree, linux-kernel, Taniya Das
Export the GCC PWM XO512 source clock ID so the Shikra PWM controller
can describe and configure its complete clock path.
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
---
include/dt-bindings/clock/qcom,shikra-gcc.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/dt-bindings/clock/qcom,shikra-gcc.h b/include/dt-bindings/clock/qcom,shikra-gcc.h
index 656c959c7e1251ed9af8fd04285fe616dfe9ecdc..b86f122e7a9ba0d10c84aac954626eb9caaf0788 100644
--- a/include/dt-bindings/clock/qcom,shikra-gcc.h
+++ b/include/dt-bindings/clock/qcom,shikra-gcc.h
@@ -222,6 +222,7 @@
#define GCC_VIDEO_VENUS_CLK_SRC 212
#define GCC_VIDEO_VENUS_CTL_CLK 213
#define GCC_VIDEO_XO_CLK 214
+#define GCC_PWM0_XO512_CLK_SRC 215
/* GCC power domains */
#define GCC_CAMSS_TOP_GDSC 0
--
2.34.1
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 2/2] clk: qcom: gcc-shikra: add PWM XO512 source clock
2026-11-16 5:27 [PATCH 0/2] clk: qcom: gcc-shikra: add PWM XO512 source clock Taniya Das
2026-11-16 5:27 ` [PATCH 1/2] dt-bindings: clock: qcom: add Shikra " Taniya Das
@ 2026-11-16 5:27 ` Taniya Das
2026-11-20 10:23 ` Abel Vesa
2026-11-20 10:28 ` Imran Shaik
1 sibling, 2 replies; 5+ messages in thread
From: Taniya Das @ 2026-11-16 5:27 UTC (permalink / raw)
To: Bjorn Andersson, Abel Vesa, Stephen Boyd, Brian Masney,
Jerome Brunet, Rob Herring, Krzysztof Kozlowski, Conor Dooley
Cc: Ajit Pandey, Imran Shaik, Jagadeesh Kona, linux-arm-msm,
linux-clk, devicetree, linux-kernel, Taniya Das
Add the programmable PWM XO512 divider sourced from bi_tcxo and make
GCC_PWM0_XO512_CLK its child. This permits PWM consumers to select their
PWM core rate through the common clock framework.
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
---
drivers/clk/qcom/gcc-shikra.c | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/drivers/clk/qcom/gcc-shikra.c b/drivers/clk/qcom/gcc-shikra.c
index 13c99a883e29877d9a929f26ca0b3b04b1ea0b11..93df784ba14376ecf2b60c5eb37e6d0b5cef9501 100644
--- a/drivers/clk/qcom/gcc-shikra.c
+++ b/drivers/clk/qcom/gcc-shikra.c
@@ -1888,6 +1888,21 @@ static struct clk_regmap_div gcc_usb30_prim_mock_utmi_postdiv_clk_src = {
},
};
+static struct clk_regmap_div gcc_pwm0_xo512_clk_src = {
+ .reg = 0x20030,
+ .shift = 0,
+ .width = 9,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "gcc_pwm0_xo512_clk_src",
+ .parent_data = &(const struct clk_parent_data) {
+ .index = DT_BI_TCXO
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_regmap_div_ops,
+ },
+};
+
static struct clk_branch gcc_ahb2phy_csi_clk = {
.halt_reg = 0x1d004,
.halt_check = BRANCH_HALT_DELAY,
@@ -3212,6 +3227,11 @@ static struct clk_branch gcc_pwm0_xo512_clk = {
.enable_mask = BIT(0),
.hw.init = &(const struct clk_init_data) {
.name = "gcc_pwm0_xo512_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &gcc_pwm0_xo512_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
@@ -4294,6 +4314,7 @@ static struct clk_regmap *gcc_shikra_clocks[] = {
[GPLL8_OUT_MAIN] = &gpll8_out_main.clkr,
[GPLL9] = &gpll9.clkr,
[GPLL9_OUT_MAIN] = &gpll9_out_main.clkr,
+ [GCC_PWM0_XO512_CLK_SRC] = &gcc_pwm0_xo512_clk_src.clkr,
};
static struct gdsc *gcc_shikra_gdscs[] = {
--
2.34.1
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 2/2] clk: qcom: gcc-shikra: add PWM XO512 source clock
2026-11-16 5:27 ` [PATCH 2/2] clk: qcom: gcc-shikra: add " Taniya Das
@ 2026-11-20 10:23 ` Abel Vesa
2026-11-20 10:28 ` Imran Shaik
1 sibling, 0 replies; 5+ messages in thread
From: Abel Vesa @ 2026-11-20 10:23 UTC (permalink / raw)
To: Taniya Das
Cc: Bjorn Andersson, Abel Vesa, Stephen Boyd, Brian Masney,
Jerome Brunet, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Ajit Pandey, Imran Shaik, Jagadeesh Kona, linux-arm-msm,
linux-clk, devicetree, linux-kernel
On 26-11-16 10:57:45, Taniya Das wrote:
> Add the programmable PWM XO512 divider sourced from bi_tcxo and make
> GCC_PWM0_XO512_CLK its child. This permits PWM consumers to select their
> PWM core rate through the common clock framework.
>
> Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 2/2] clk: qcom: gcc-shikra: add PWM XO512 source clock
2026-11-16 5:27 ` [PATCH 2/2] clk: qcom: gcc-shikra: add " Taniya Das
2026-11-20 10:23 ` Abel Vesa
@ 2026-11-20 10:28 ` Imran Shaik
1 sibling, 0 replies; 5+ messages in thread
From: Imran Shaik @ 2026-11-20 10:28 UTC (permalink / raw)
To: Taniya Das, Bjorn Andersson, Abel Vesa, Stephen Boyd,
Brian Masney, Jerome Brunet, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: Ajit Pandey, Jagadeesh Kona, linux-arm-msm, linux-clk,
devicetree, linux-kernel
On 16-11-2026 10:57 am, Taniya Das wrote:
> Add the programmable PWM XO512 divider sourced from bi_tcxo and make
> GCC_PWM0_XO512_CLK its child. This permits PWM consumers to select their
> PWM core rate through the common clock framework.
>
> Signed-off-by: Taniya Das<taniya.das@oss.qualcomm.com>
> ---
> drivers/clk/qcom/gcc-shikra.c | 21 +++++++++++++++++++++
> 1 file changed, 21 insertions(+)
Reviewed-by: Imran Shaik <imran.shaik@oss.qualcomm.com>
Thanks,
Imran
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2026-11-20 10:28 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-11-16 5:27 [PATCH 0/2] clk: qcom: gcc-shikra: add PWM XO512 source clock Taniya Das
2026-11-16 5:27 ` [PATCH 1/2] dt-bindings: clock: qcom: add Shikra " Taniya Das
2026-11-16 5:27 ` [PATCH 2/2] clk: qcom: gcc-shikra: add " Taniya Das
2026-11-20 10:23 ` Abel Vesa
2026-11-20 10:28 ` Imran Shaik
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®