* [PATCH] clk: qcom: videocc-sm8550: Use HW_CTRL_TRIGGER flag for video GDSC's
@ 2024-08-12 13:47 Vedang Nagar
2024-08-19 9:25 ` neil.armstrong
2024-08-21 14:46 ` Bjorn Andersson
0 siblings, 2 replies; 3+ messages in thread
From: Vedang Nagar @ 2024-08-12 13:47 UTC (permalink / raw)
To: Bjorn Andersson, Michael Turquette, Stephen Boyd
Cc: linux-arm-msm, linux-clk, linux-kernel, quic_dikshita,
quic_vgarodia, Vedang Nagar
The video driver will be using the newly introduced
dev_pm_genpd_set_hwmode() API to switch the video GDSC
to HW/SW control modes at runtime.
Hence use HW_CTRL_TRIGGER flag instead of HW_CTRL for
video GDSC's.
Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com>
---
drivers/clk/qcom/videocc-sm8550.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/qcom/videocc-sm8550.c b/drivers/clk/qcom/videocc-sm8550.c
index 97d150b132a6..7c25a50cfa97 100644
--- a/drivers/clk/qcom/videocc-sm8550.c
+++ b/drivers/clk/qcom/videocc-sm8550.c
@@ -449,7 +449,7 @@ static struct gdsc video_cc_mvs0_gdsc = {
},
.pwrsts = PWRSTS_OFF_ON,
.parent = &video_cc_mvs0c_gdsc.pd,
- .flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE | HW_CTRL,
+ .flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE | HW_CTRL_TRIGGER,
};
static struct gdsc video_cc_mvs1c_gdsc = {
@@ -474,7 +474,7 @@ static struct gdsc video_cc_mvs1_gdsc = {
},
.pwrsts = PWRSTS_OFF_ON,
.parent = &video_cc_mvs1c_gdsc.pd,
- .flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE | HW_CTRL,
+ .flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE | HW_CTRL_TRIGGER,
};
static struct clk_regmap *video_cc_sm8550_clocks[] = {
--
2.17.1
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH] clk: qcom: videocc-sm8550: Use HW_CTRL_TRIGGER flag for video GDSC's
2024-08-12 13:47 [PATCH] clk: qcom: videocc-sm8550: Use HW_CTRL_TRIGGER flag for video GDSC's Vedang Nagar
@ 2024-08-19 9:25 ` neil.armstrong
2024-08-21 14:46 ` Bjorn Andersson
1 sibling, 0 replies; 3+ messages in thread
From: neil.armstrong @ 2024-08-19 9:25 UTC (permalink / raw)
To: Vedang Nagar, Bjorn Andersson, Michael Turquette, Stephen Boyd
Cc: linux-arm-msm, linux-clk, linux-kernel, quic_dikshita, quic_vgarodia
On 12/08/2024 15:47, Vedang Nagar wrote:
> The video driver will be using the newly introduced
> dev_pm_genpd_set_hwmode() API to switch the video GDSC
> to HW/SW control modes at runtime.
> Hence use HW_CTRL_TRIGGER flag instead of HW_CTRL for
> video GDSC's.
>
> Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com>
> ---
> drivers/clk/qcom/videocc-sm8550.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/clk/qcom/videocc-sm8550.c b/drivers/clk/qcom/videocc-sm8550.c
> index 97d150b132a6..7c25a50cfa97 100644
> --- a/drivers/clk/qcom/videocc-sm8550.c
> +++ b/drivers/clk/qcom/videocc-sm8550.c
> @@ -449,7 +449,7 @@ static struct gdsc video_cc_mvs0_gdsc = {
> },
> .pwrsts = PWRSTS_OFF_ON,
> .parent = &video_cc_mvs0c_gdsc.pd,
> - .flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE | HW_CTRL,
> + .flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE | HW_CTRL_TRIGGER,
> };
>
> static struct gdsc video_cc_mvs1c_gdsc = {
> @@ -474,7 +474,7 @@ static struct gdsc video_cc_mvs1_gdsc = {
> },
> .pwrsts = PWRSTS_OFF_ON,
> .parent = &video_cc_mvs1c_gdsc.pd,
> - .flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE | HW_CTRL,
> + .flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE | HW_CTRL_TRIGGER,
> };
>
> static struct clk_regmap *video_cc_sm8550_clocks[] = {
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH] clk: qcom: videocc-sm8550: Use HW_CTRL_TRIGGER flag for video GDSC's
2024-08-12 13:47 [PATCH] clk: qcom: videocc-sm8550: Use HW_CTRL_TRIGGER flag for video GDSC's Vedang Nagar
2024-08-19 9:25 ` neil.armstrong
@ 2024-08-21 14:46 ` Bjorn Andersson
1 sibling, 0 replies; 3+ messages in thread
From: Bjorn Andersson @ 2024-08-21 14:46 UTC (permalink / raw)
To: Michael Turquette, Stephen Boyd, Vedang Nagar
Cc: linux-arm-msm, linux-clk, linux-kernel, quic_dikshita, quic_vgarodia
On Mon, 12 Aug 2024 19:17:52 +0530, Vedang Nagar wrote:
> The video driver will be using the newly introduced
> dev_pm_genpd_set_hwmode() API to switch the video GDSC
> to HW/SW control modes at runtime.
> Hence use HW_CTRL_TRIGGER flag instead of HW_CTRL for
> video GDSC's.
>
>
> [...]
Applied, thanks!
[1/1] clk: qcom: videocc-sm8550: Use HW_CTRL_TRIGGER flag for video GDSC's
commit: d628455ab3c22bf633935f5d09451530c44c4ba3
Best regards,
--
Bjorn Andersson <andersson@kernel.org>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2024-08-21 14:46 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-08-12 13:47 [PATCH] clk: qcom: videocc-sm8550: Use HW_CTRL_TRIGGER flag for video GDSC's Vedang Nagar
2024-08-19 9:25 ` neil.armstrong
2024-08-21 14:46 ` Bjorn Andersson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®