mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
To: Damien Riegel <damien.riegel@savoirfairelinux.com>,
	alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org
Cc: Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
	Takashi Iwai <tiwai@suse.com>
Subject: Re: [RFC] ASoC: codecs: msm8916-wcd-analog: use btn0 released detection
Date: Thu, 28 Sep 2017 12:56:52 -0700	[thread overview]
Message-ID: <061955ae-7216-238c-52d4-4b1f83cdeab1@linaro.org> (raw)
In-Reply-To: <20170913204355.26186-1-damien.riegel@savoirfairelinux.com>



On 13/09/17 13:43, Damien Riegel wrote:
> msm8916-wcd-analog uses button0 to differentiate between headphone and
> headset. Under some circumstances, button pressed and released
> interrupts are not fired as the driver expects it.
> 
> For instance, with some connectors, there are spurious button-pressed
> interrupts when unplugging a headphone, without the corresponding
> button-released interrupt. But the codec always alternates between
> button pressed and released interrupts, it cannot fire two interrupts of
> the same kind in a row. That means that when the headphone is plugged
> back, only a button-released interrupt will be fired instead of pressed
> then released. This causes the driver to report headphone as headset.
> 
> By changing the logic and relying on button 0 release interrupt, the
> driver could be made more robust for connectors that differ from the one
> used on the Dragonboard's audio mezzanine.
> 
> Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com>


Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

> ---


>   sound/soc/codecs/msm8916-wcd-analog.c | 18 ++++++++----------
>   1 file changed, 8 insertions(+), 10 deletions(-)
> 
> diff --git a/sound/soc/codecs/msm8916-wcd-analog.c b/sound/soc/codecs/msm8916-wcd-analog.c
> index 549c269acc7d..f562f2d86907 100644
> --- a/sound/soc/codecs/msm8916-wcd-analog.c
> +++ b/sound/soc/codecs/msm8916-wcd-analog.c
> @@ -285,7 +285,7 @@ struct pm8916_wcd_analog_priv {
>   	u16 codec_version;
>   	bool	mbhc_btn_enabled;
>   	/* special event to detect accessory type */
> -	bool	mbhc_btn0_pressed;
> +	int	mbhc_btn0_released;
>   	bool	detect_accessory_type;
>   	struct clk *mclk;
>   	struct snd_soc_codec *codec;
> @@ -483,7 +483,7 @@ static void pm8916_wcd_setup_mbhc(struct pm8916_wcd_analog_priv *wcd)
>   
>   	snd_soc_update_bits(codec, CDC_D_INT_EN_CLR, int_en_mask, 0);
>   	snd_soc_update_bits(codec, CDC_D_INT_EN_SET, int_en_mask, int_en_mask);
> -	wcd->mbhc_btn0_pressed = false;
> +	wcd->mbhc_btn0_released = false;
>   	wcd->detect_accessory_type = true;
>   }
>   
> @@ -950,7 +950,7 @@ static irqreturn_t mbhc_btn_release_irq_handler(int irq, void *arg)
>   
>   		/* check if its BTN0 thats released */
>   		if ((val != -1) && !(val & CDC_A_MBHC_RESULT_1_BTN_RESULT_MASK))
> -			priv->mbhc_btn0_pressed = false;
> +			priv->mbhc_btn0_released = true;
>   
>   	} else {
>   		snd_soc_jack_report(priv->jack, 0, btn_mask);
> @@ -983,9 +983,7 @@ static irqreturn_t mbhc_btn_press_irq_handler(int irq, void *arg)
>   		break;
>   	case 0x0:
>   		/* handle BTN_0 specially for type detection */
> -		if (priv->detect_accessory_type)
> -			priv->mbhc_btn0_pressed = true;
> -		else
> +		if (!priv->detect_accessory_type)
>   			snd_soc_jack_report(priv->jack,
>   					    SND_JACK_BTN_0, btn_mask);
>   		break;
> @@ -1029,19 +1027,19 @@ static irqreturn_t pm8916_mbhc_switch_irq_handler(int irq, void *arg)
>   		 * both press and release event received then its
>   		 * a headset.
>   		 */
> -		if (priv->mbhc_btn0_pressed)
> +		if (priv->mbhc_btn0_released)
>   			snd_soc_jack_report(priv->jack,
> -					    SND_JACK_HEADPHONE, hs_jack_mask);
> +					    SND_JACK_HEADSET, hs_jack_mask);
>   		else
>   			snd_soc_jack_report(priv->jack,
> -					    SND_JACK_HEADSET, hs_jack_mask);
> +					    SND_JACK_HEADPHONE, hs_jack_mask);
>   
>   		priv->detect_accessory_type = false;
>   
>   	} else { /* removal */
>   		snd_soc_jack_report(priv->jack, 0, hs_jack_mask);
>   		priv->detect_accessory_type = true;
> -		priv->mbhc_btn0_pressed = false;
> +		priv->mbhc_btn0_released = false;
>   	}
>   
>   	return IRQ_HANDLED;
> 

      parent reply	other threads:[~2017-09-28 19:56 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-09-13 20:43 Damien Riegel
2017-09-18  9:08 ` Srinivas Kandagatla
2017-09-19 12:11   ` Mark Brown
2017-09-19 13:22     ` Damien Riegel
2017-09-28 18:18       ` Srinivas Kandagatla
2017-09-28 19:10         ` Damien Riegel
2017-09-28 18:58 ` Applied "ASoC: codecs: msm8916-wcd-analog: use btn0 released detection" to the asoc tree Mark Brown
2017-09-28 19:56 ` Srinivas Kandagatla [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=061955ae-7216-238c-52d4-4b1f83cdeab1@linaro.org \
    --to=srinivas.kandagatla@linaro.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=damien.riegel@savoirfairelinux.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=perex@perex.cz \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®