mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: James Ogletree <james.ogletree@cirrus.com>, dmitry.torokhov@gmail.com
Cc: Fred Treven <fred.treven@cirrus.com>,
	Ben Bright <ben.bright@cirrus.com>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>, Lee Jones <lee@kernel.org>,
	Peng Fan <peng.fan@nxp.com>, Jean Delvare <jdelvare@suse.de>,
	Jeff LaBundy <jeff@labundy.com>,
	Randy Dunlap <rdunlap@infradead.org>,
	Arnd Bergmann <arnd@arndb.de>,
	Eddie James <eajames@linux.ibm.com>, Jacky Bai <ping.bai@nxp.com>,
	Markus Schneider-Pargmann <msp@baylibre.com>,
	ChiYuan Huang <cy_huang@richtek.com>,
	Jerome Neanne <jneanne@baylibre.com>,
	patches@cirrus.com, linux-input@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/2] Input: cs40l50 - Initial support for Cirrus Logic CS40L50
Date: Wed, 9 Aug 2023 08:47:11 +0200	[thread overview]
Message-ID: <065fbe51-928c-4728-efc2-bde87cd48cb3@linaro.org> (raw)
In-Reply-To: <20230808172511.665787-2-james.ogletree@cirrus.com>

On 08/08/2023 19:25, James Ogletree wrote:
> Introduce support for Cirrus Logic Device CS40L50: a
> haptics driver with waveform memory DSP and closed-loop
> algorithms.
> 
> Change-Id: I468e8f726e81072ebea19b2dfbe23ca775fedc97

Please run scripts/checkpatch.pl and fix reported warnings. Some
warnings can be ignored, but the code here looks like it needs a fix.
Feel free to get in touch if the warning is not clear.

> Signed-off-by: James Ogletree <james.ogletree@cirrus.com>
> ---
>  MAINTAINERS                      |    2 +
>  drivers/input/misc/Kconfig       |   33 +
>  drivers/input/misc/Makefile      |    3 +
>  drivers/input/misc/cs40l50-i2c.c |   67 ++
>  drivers/input/misc/cs40l50-spi.c |   67 ++
>  drivers/input/misc/cs40l50.c     | 1013 ++++++++++++++++++++++++++++++
>  include/linux/input/cs40l50.h    |  321 ++++++++++
>  7 files changed, 1506 insertions(+)
>  create mode 100644 drivers/input/misc/cs40l50-i2c.c
>  create mode 100644 drivers/input/misc/cs40l50-spi.c
>  create mode 100644 drivers/input/misc/cs40l50.c
>  create mode 100644 include/linux/input/cs40l50.h
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 016e5ff3b831..f1d913166166 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -2089,6 +2089,8 @@ L:	patches@Qopensource.cirrus.com
>  S:	Supported
>  T:	git https://github.com/CirrusLogic/linux-drivers.git
>  F:	Documentation/devicetree/bindings/input/cirrus,cs40l50.yaml
> +F:	drivers/input/misc/cs40l*
> +F:	include/linux/input/cs40l*
>  
>  ARM/CLKDEV SUPPORT
>  M:	Russell King <linux@armlinux.org.uk>
> diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
> index c47eecc6f83b..fa0bdd23f87d 100644
> --- a/drivers/input/misc/Kconfig
> +++ b/drivers/input/misc/Kconfig
> @@ -140,6 +140,39 @@ config INPUT_BMA150
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called bma150.
>  
> +config INPUT_CS40L50
> +	tristate "Cirrus Logic CS40L50 Haptic Driver support"
> +	select CS_DSP
> +	select REGMAP_IRQ
> +	help
> +	  Say Y here to enable support for CS40L50 boosted haptic
> +	  driver.
> +
> +	  To compile the driver as a module choose M here: the module
> +	  will be called cs40l50_core.
> +
> +config INPUT_CS40L50_I2C
> +	tristate "Support I2C bus connection"
> +	depends on INPUT_CS40L50 && I2C
> +	select REGMAP_I2C
> +	help
> +	  Say Y here if you have Cirrus Logic's CS40L50 connected
> +	  to an I2C bus.
> +
> +	  To compile the driver as a module choose M here: the
> +	  module will be called cs40l50_i2c
> +
> +config INPUT_CS40L50_SPI
> +	tristate "Support SPI bus connection"
> +	depends on INPUT_CS40L50 && SPI
> +	select REGMAP_SPI
> +	help
> +	  Say Y here if you have Cirrus Logic's CS40L50 connected
> +	  to a SPI bus.
> +
> +	  To compile the driver as a module choose M here: the
> +	  module will be called cs40l50_spi.
> +
>  config INPUT_E3X0_BUTTON
>  	tristate "NI Ettus Research USRP E3xx Button support."
>  	default n
> diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
> index 04296a4abe8e..77f34a33c364 100644
> --- a/drivers/input/misc/Makefile
> +++ b/drivers/input/misc/Makefile
> @@ -28,6 +28,9 @@ obj-$(CONFIG_INPUT_CMA3000)		+= cma3000_d0x.o
>  obj-$(CONFIG_INPUT_CMA3000_I2C)		+= cma3000_d0x_i2c.o
>  obj-$(CONFIG_INPUT_COBALT_BTNS)		+= cobalt_btns.o
>  obj-$(CONFIG_INPUT_CPCAP_PWRBUTTON)	+= cpcap-pwrbutton.o
> +obj-$(CONFIG_INPUT_CS40L50)		+= cs40l50.o
> +obj-$(CONFIG_INPUT_CS40L50_I2C)		+= cs40l50-i2c.o
> +obj-$(CONFIG_INPUT_CS40L50_SPI)		+= cs40l50-spi.o
>  obj-$(CONFIG_INPUT_DA7280_HAPTICS)	+= da7280.o
>  obj-$(CONFIG_INPUT_DA9052_ONKEY)	+= da9052_onkey.o
>  obj-$(CONFIG_INPUT_DA9055_ONKEY)	+= da9055_onkey.o
> diff --git a/drivers/input/misc/cs40l50-i2c.c b/drivers/input/misc/cs40l50-i2c.c
> new file mode 100644
> index 000000000000..bab07debdaa9
> --- /dev/null
> +++ b/drivers/input/misc/cs40l50-i2c.c
> @@ -0,0 +1,67 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * CS40L50 Advanced Haptic Driver with Waveform Memory DSP
> + * and Closed-Loop Algorithms
> + *
> + * Copyright 2023 Cirrus Logic, Inc.
> + *
> + */
> +#include <linux/i2c.h>
> +#include <linux/input/cs40l50.h>
> +
> +static const struct i2c_device_id cs40l50_id_i2c[] = {
> +	{"cs40l50", 0},
> +	{}
> +};
> +MODULE_DEVICE_TABLE(i2c, cs40l50_id_i2c);
> +
> +static const struct of_device_id cs40l50_of_match[] = {
> +	{ .compatible = "cirrus,cs40l50" },
> +	{}
> +};
> +MODULE_DEVICE_TABLE(of, cs40l50_of_match);
> +
> +static int cs40l50_i2c_probe(struct i2c_client *client)
> +{
> +	struct device *dev = &client->dev;
> +	struct cs40l50_private *cs40l50;
> +
> +	cs40l50 = devm_kzalloc(dev, sizeof(struct cs40l50_private), GFP_KERNEL);

sizeof(*)

> +	if (!cs40l50)
> +		return -ENOMEM;
> +
> +	i2c_set_clientdata(client, cs40l50);
> +
> +	cs40l50->regmap = devm_regmap_init_i2c(client, &cs40l50_regmap);
> +	if (IS_ERR(cs40l50->regmap))
> +		return dev_err_probe(cs40l50->dev, PTR_ERR(cs40l50->regmap),
> +				"Failed to initialize register map\n");
> +
> +	cs40l50->dev = dev;
> +	cs40l50->irq = client->irq;
> +
> +	return cs40l50_probe(cs40l50);
> +}
> +
> +static void cs40l50_i2c_remove(struct i2c_client *client)
> +{
> +	struct cs40l50_private *cs40l50 = i2c_get_clientdata(client);
> +
> +	cs40l50_remove(cs40l50);
> +}
> +
> +static struct i2c_driver cs40l50_i2c_driver = {
> +	.driver = {
> +		.name = "cs40l50",
> +		.of_match_table = cs40l50_of_match,
> +	},
> +	.id_table = cs40l50_id_i2c,
> +	.probe_new = cs40l50_i2c_probe,
> +	.remove = cs40l50_i2c_remove,
> +};
> +
> +module_i2c_driver(cs40l50_i2c_driver);
> +
> +MODULE_DESCRIPTION("CS40L50 I2C Driver");
> +MODULE_AUTHOR("James Ogletree, Cirrus Logic Inc. <james.ogletree@cirrus.com>");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/input/misc/cs40l50-spi.c b/drivers/input/misc/cs40l50-spi.c
> new file mode 100644
> index 000000000000..dbaa185b6bbd
> --- /dev/null
> +++ b/drivers/input/misc/cs40l50-spi.c
> @@ -0,0 +1,67 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * CS40L50 Advanced Haptic Driver with Waveform Memory DSP
> + * and Closed-Loop Algorithms
> + *
> + * Copyright 2023 Cirrus Logic, Inc.
> + *
> + */
> +#include <linux/spi/spi.h>
> +#include <linux/input/cs40l50.h>
> +
> +static const struct spi_device_id cs40l50_id_spi[] = {
> +	{"cs40l50", 0},
> +	{}
> +};
> +MODULE_DEVICE_TABLE(spi, cs40l50_id_spi);
> +
> +static const struct of_device_id cs40l50_of_match[] = {
> +	{ .compatible = "cirrus,cs40l50" },
> +	{}
> +};
> +MODULE_DEVICE_TABLE(of, cs40l50_of_match);
> +
> +static int cs40l50_spi_probe(struct spi_device *spi)
> +{
> +	struct cs40l50_private *cs40l50;
> +	struct device *dev = &spi->dev;
> +
> +	cs40l50 = devm_kzalloc(dev, sizeof(struct cs40l50_private), GFP_KERNEL);

sizeof(*)
In all other places as well.


...


> +
> +int cs40l50_probe(struct cs40l50_private *cs40l50)
> +{
> +	int error, i, irq;
> +	u32 val;
> +
> +	mutex_init(&cs40l50->lock);
> +
> +	error = devm_regulator_bulk_get(cs40l50->dev, ARRAY_SIZE(cs40l50_supplies),
> +			cs40l50_supplies);
> +	if (error) {
> +		dev_err(cs40l50->dev, "Failed to request supplies\n");

dev_err_probe

> +		goto err;

So you call cs40l50_remove() here? Are you sure you tested this path?

> +	}
> +
> +	error = regulator_bulk_enable(ARRAY_SIZE(cs40l50_supplies), cs40l50_supplies);
> +	if (error) {
> +		dev_err(cs40l50->dev, "Failed to enable supplies\n");

This for sure is wrong. Why do you disable regulators when enabling them
failed?

> +		goto err;
> +	}
> +
> +	cs40l50->reset_gpio = devm_gpiod_get_optional(cs40l50->dev, "reset", GPIOD_OUT_HIGH);
> +	if (IS_ERR(cs40l50->reset_gpio)) {
> +		error = PTR_ERR(cs40l50->reset_gpio);
> +		goto err;
> +	}
> +
> +	usleep_range(CS40L50_MIN_RESET_PULSE_WIDTH_US, CS40L50_MIN_RESET_PULSE_WIDTH_US + 100);
> +
> +	gpiod_set_value_cansleep(cs40l50->reset_gpio, 0);
> +
> +	usleep_range(CS40L50_CP_READY_DELAY_US, CS40L50_CP_READY_DELAY_US + 1000);
> +
> +	for (i = 0; i < CS40L50_DSP_TIMEOUT_COUNT; i++) {
> +		error = cs40l50_dsp_read(cs40l50, CS40L50_DSP1_HALO_STATE, &val);
> +		if (!error && val < 0xFFFF && val >= CS40L50_HALO_STATE_BOOT_DONE)
> +			break;
> +
> +		usleep_range(CS40L50_DSP_POLL_US, CS40L50_DSP_POLL_US + 100);
> +	}
> +
> +	if (i == CS40L50_DSP_TIMEOUT_COUNT) {
> +		dev_err(cs40l50->dev, "Firmware boot failed: %d, halo state = %#x\n", error, val);
> +		goto err;
> +	}
> +
> +	cs40l50->vibe_workqueue = alloc_ordered_workqueue("cs40l50_workqueue", WQ_HIGHPRI);
> +	if (!cs40l50->vibe_workqueue) {
> +		error = -ENOMEM;
> +		goto err;
> +	}
> +
> +	INIT_WORK(&cs40l50->vibe_start_work, cs40l50_vibe_start_worker);
> +	INIT_WORK(&cs40l50->vibe_stop_work, cs40l50_vibe_stop_worker);
> +
> +	error = cs40l50_cs_dsp_init(cs40l50);
> +	if (error)
> +		goto err;
> +
> +	error = cs40l50_input_init(cs40l50);
> +	if (error)
> +		goto err;
> +
> +	error = cs40l50_patch_firmware(cs40l50);
> +	if (error)
> +		goto err;
> +
> +	error = cs40l50_pseq_init(cs40l50);
> +	if (error)
> +		goto err;
> +
> +	error = cs40l50_config_bst(cs40l50);
> +	if (error)
> +		goto err;
> +
> +	error = devm_regmap_add_irq_chip(cs40l50->dev, cs40l50->regmap, cs40l50->irq,
> +			IRQF_ONESHOT | IRQF_SHARED | IRQF_TRIGGER_LOW, 0, &cs40l50_regmap_irq_chip,
> +			&cs40l50->irq_data);
> +	if (error) {
> +		dev_err(cs40l50->dev, "Failed to register IRQ chip: %d\n", error);
> +		goto err;
> +	}
> +
> +	for (i = 0; i < ARRAY_SIZE(cs40l50_irqs); i++) {
> +		irq = regmap_irq_get_virq(cs40l50->irq_data, cs40l50_irqs[i].irq);
> +		if (irq < 0) {
> +			dev_err(cs40l50->dev, "Failed to get %s\n", cs40l50_irqs[i].name);
> +			error = irq;
> +			goto err;
> +		}
> +
> +		error = devm_request_threaded_irq(cs40l50->dev, irq, NULL, cs40l50_irqs[i].handler,
> +				IRQF_ONESHOT | IRQF_SHARED | IRQF_TRIGGER_LOW,
> +						cs40l50_irqs[i].name, cs40l50);
> +		if (error) {
> +			dev_err(cs40l50->dev, "Failed to request IRQ %s: %d\n",
> +					cs40l50_irqs[i].name, error);
> +			goto err;
> +		}
> +	}
> +
> +	return 0;
> +
> +err:
> +	cs40l50_remove(cs40l50);
> +
> +	return error;
> +}
> +EXPORT_SYMBOL_GPL(cs40l50_probe);
> +
> +int cs40l50_remove(struct cs40l50_private *cs40l50)
> +{
> +	disable_irq(cs40l50->irq);
> +
> +	if (cs40l50->dsp.booted)
> +		cs_dsp_power_down(&cs40l50->dsp);
> +	if (&cs40l50->dsp)
> +		cs_dsp_remove(&cs40l50->dsp);
> +
> +	if (cs40l50->vibe_workqueue) {
> +		flush_workqueue(cs40l50->vibe_workqueue);
> +		destroy_workqueue(cs40l50->vibe_workqueue);
> +	}
> +
> +	gpiod_set_value_cansleep(cs40l50->reset_gpio, 1);
> +	regulator_bulk_disable(ARRAY_SIZE(cs40l50_supplies), cs40l50_supplies);
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(cs40l50_remove);
> +
> +MODULE_DESCRIPTION("CS40L50 Advanced Haptic Driver");
> +MODULE_AUTHOR("James Ogletree, Cirrus Logic Inc. <james.ogletree@cirrus.com>");
> +MODULE_LICENSE("GPL");

I don't think this is a module.

Best regards,
Krzysztof


  reply	other threads:[~2023-08-09  6:47 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-08-08 17:25 [PATCH 1/2] dt-bindings: input: cirrus,cs40l50: Support for CS40L50 James Ogletree
2023-08-08 17:25 ` [PATCH 2/2] Input: cs40l50 - Initial support for Cirrus Logic CS40L50 James Ogletree
2023-08-09  6:47   ` Krzysztof Kozlowski [this message]
2023-08-09 18:02     ` James Ogletree
2023-08-10  6:12       ` Krzysztof Kozlowski
2023-08-14 21:44         ` James Ogletree
2023-08-15  5:08           ` Krzysztof Kozlowski
2023-08-09  6:43 ` [PATCH 1/2] dt-bindings: input: cirrus,cs40l50: Support for CS40L50 Krzysztof Kozlowski
2023-08-09 16:41   ` James Ogletree

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=065fbe51-928c-4728-efc2-bde87cd48cb3@linaro.org \
    --to=krzysztof.kozlowski@linaro.org \
    --cc=arnd@arndb.de \
    --cc=ben.bright@cirrus.com \
    --cc=conor+dt@kernel.org \
    --cc=cy_huang@richtek.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=eajames@linux.ibm.com \
    --cc=fred.treven@cirrus.com \
    --cc=james.ogletree@cirrus.com \
    --cc=jdelvare@suse.de \
    --cc=jeff@labundy.com \
    --cc=jneanne@baylibre.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=lee@kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=msp@baylibre.com \
    --cc=patches@cirrus.com \
    --cc=peng.fan@nxp.com \
    --cc=ping.bai@nxp.com \
    --cc=rdunlap@infradead.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®