From: Krish Sadhukhan <krish.sadhukhan@oracle.com>
To: Paolo Bonzini <pbonzini@redhat.com>,
linux-kernel@vger.kernel.org, kvm@vger.kernel.org
Subject: Re: [PATCH 06/30] KVM: SVM: always update CR3 in VMCB
Date: Fri, 29 May 2020 10:41:58 -0700 [thread overview]
Message-ID: <07139fc2-39bd-5bc5-ef23-a98681013665@oracle.com> (raw)
In-Reply-To: <20200529153934.11694-7-pbonzini@redhat.com>
On 5/29/20 8:39 AM, Paolo Bonzini wrote:
> svm_load_mmu_pgd is delaying the write of GUEST_CR3 to prepare_vmcs02
Did you mean to say enter_svm_guest_mode here ?
> as
> an optimization, but this is only correct before the nested vmentry.
> If userspace is modifying CR3 with KVM_SET_SREGS after the VM has
> already been put in guest mode, the value of CR3 will not be updated.
> Remove the optimization, which almost never triggers anyway.
> This was was added in commit 689f3bf21628 ("KVM: x86: unify callbacks
> to load paging root", 2020-03-16) just to keep the two vendor-specific
> modules closer, but we'll fix VMX too.
>
> Fixes: 689f3bf21628 ("KVM: x86: unify callbacks to load paging root")
> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
> ---
> arch/x86/kvm/svm/nested.c | 6 +-----
> arch/x86/kvm/svm/svm.c | 16 +++++-----------
> 2 files changed, 6 insertions(+), 16 deletions(-)
>
> diff --git a/arch/x86/kvm/svm/nested.c b/arch/x86/kvm/svm/nested.c
> index dcac4c3510ab..8756c9f463fd 100644
> --- a/arch/x86/kvm/svm/nested.c
> +++ b/arch/x86/kvm/svm/nested.c
> @@ -256,11 +256,7 @@ void enter_svm_guest_mode(struct vcpu_svm *svm, u64 vmcb_gpa,
> svm_set_efer(&svm->vcpu, nested_vmcb->save.efer);
> svm_set_cr0(&svm->vcpu, nested_vmcb->save.cr0);
> svm_set_cr4(&svm->vcpu, nested_vmcb->save.cr4);
> - if (npt_enabled) {
> - svm->vmcb->save.cr3 = nested_vmcb->save.cr3;
> - svm->vcpu.arch.cr3 = nested_vmcb->save.cr3;
> - } else
> - (void)kvm_set_cr3(&svm->vcpu, nested_vmcb->save.cr3);
> + (void)kvm_set_cr3(&svm->vcpu, nested_vmcb->save.cr3);
>
> /* Guest paging mode is active - reset mmu */
> kvm_mmu_reset_context(&svm->vcpu);
> diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c
> index 545f63ebc720..feb96a410f2d 100644
> --- a/arch/x86/kvm/svm/svm.c
> +++ b/arch/x86/kvm/svm/svm.c
> @@ -3447,7 +3447,6 @@ static fastpath_t svm_vcpu_run(struct kvm_vcpu *vcpu)
> static void svm_load_mmu_pgd(struct kvm_vcpu *vcpu, unsigned long root)
> {
> struct vcpu_svm *svm = to_svm(vcpu);
> - bool update_guest_cr3 = true;
> unsigned long cr3;
>
> cr3 = __sme_set(root);
> @@ -3456,18 +3455,13 @@ static void svm_load_mmu_pgd(struct kvm_vcpu *vcpu, unsigned long root)
> mark_dirty(svm->vmcb, VMCB_NPT);
>
> /* Loading L2's CR3 is handled by enter_svm_guest_mode. */
> - if (is_guest_mode(vcpu))
> - update_guest_cr3 = false;
> - else if (test_bit(VCPU_EXREG_CR3, (ulong *)&vcpu->arch.regs_avail))
> - cr3 = vcpu->arch.cr3;
> - else /* CR3 is already up-to-date. */
> - update_guest_cr3 = false;
> + if (!test_bit(VCPU_EXREG_CR3, (ulong *)&vcpu->arch.regs_avail))
> + return;
> + cr3 = vcpu->arch.cr3;
> }
>
> - if (update_guest_cr3) {
> - svm->vmcb->save.cr3 = cr3;
> - mark_dirty(svm->vmcb, VMCB_CR);
> - }
> + svm->vmcb->save.cr3 = cr3;
> + mark_dirty(svm->vmcb, VMCB_CR);
> }
>
> static int is_disabled(void)
next prev parent reply other threads:[~2020-05-29 17:44 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-29 15:39 [PATCH v3 00/28] KVM: nSVM: event fixes and migration support Paolo Bonzini
2020-05-29 15:39 ` [PATCH 01/30] KVM: x86: track manually whether an event has been injected Paolo Bonzini
2020-05-29 15:39 ` [PATCH 02/30] KVM: x86: enable event window in inject_pending_event Paolo Bonzini
2020-05-29 15:39 ` [PATCH 03/30] KVM: nSVM: inject exceptions via svm_check_nested_events Paolo Bonzini
2020-05-29 15:39 ` [PATCH 04/30] KVM: nSVM: remove exit_required Paolo Bonzini
2020-05-29 15:39 ` [PATCH 05/30] KVM: nSVM: correctly inject INIT vmexits Paolo Bonzini
2020-05-29 15:39 ` [PATCH 06/30] KVM: SVM: always update CR3 in VMCB Paolo Bonzini
2020-05-29 17:41 ` Krish Sadhukhan [this message]
2020-05-29 17:56 ` Sean Christopherson
2020-05-29 15:39 ` [PATCH 07/30] KVM: nVMX: always update CR3 in VMCS Paolo Bonzini
2020-05-29 15:39 ` [PATCH 08/30] KVM: nSVM: move map argument out of enter_svm_guest_mode Paolo Bonzini
2020-05-29 18:10 ` Krish Sadhukhan
2020-05-29 19:04 ` Paolo Bonzini
2020-05-29 20:02 ` Krish Sadhukhan
2020-05-29 15:39 ` [PATCH 09/30] KVM: nSVM: extract load_nested_vmcb_control Paolo Bonzini
2020-05-29 15:39 ` [PATCH 10/30] KVM: nSVM: extract preparation of VMCB for nested run Paolo Bonzini
2020-05-29 18:27 ` Krish Sadhukhan
2020-05-29 19:02 ` Paolo Bonzini
2020-05-29 15:39 ` [PATCH 11/30] KVM: nSVM: move MMU setup to nested_prepare_vmcb_control Paolo Bonzini
2020-05-29 15:39 ` [PATCH 12/30] KVM: nSVM: clean up tsc_offset update Paolo Bonzini
2020-05-29 15:39 ` [PATCH 13/30] KVM: nSVM: pass vmcb_control_area to copy_vmcb_control_area Paolo Bonzini
2020-05-29 15:39 ` [PATCH 14/30] KVM: nSVM: remove trailing padding for struct vmcb_control_area Paolo Bonzini
2020-05-29 15:39 ` [PATCH 15/30] KVM: nSVM: save all control fields in svm->nested Paolo Bonzini
2020-05-29 15:39 ` [PATCH 16/30] KVM: nSVM: restore clobbered INT_CTL fields after clearing VINTR Paolo Bonzini
2020-05-29 15:39 ` [PATCH 17/30] KVM: nSVM: synchronize VMCB controls updated by the processor on every vmexit Paolo Bonzini
2020-05-30 2:06 ` Krish Sadhukhan
2020-05-30 5:10 ` Paolo Bonzini
2020-05-29 15:39 ` [PATCH 18/30] KVM: nSVM: remove unnecessary if Paolo Bonzini
2020-05-29 15:39 ` [PATCH 19/30] KVM: nSVM: extract svm_set_gif Paolo Bonzini
2020-06-05 20:33 ` Qian Cai
2020-06-08 11:11 ` Paolo Bonzini
2020-05-29 15:39 ` [PATCH 20/30] KVM: SVM: preserve VGIF across VMCB switch Paolo Bonzini
2020-05-31 23:11 ` Krish Sadhukhan
2020-06-01 7:30 ` Paolo Bonzini
2020-05-29 15:39 ` [PATCH 21/30] KVM: nSVM: synthesize correct EXITINTINFO on vmexit Paolo Bonzini
2020-05-29 15:39 ` [PATCH 22/30] KVM: nSVM: remove HF_VINTR_MASK Paolo Bonzini
2020-05-29 15:39 ` [PATCH 23/30] KVM: nSVM: remove HF_HIF_MASK Paolo Bonzini
2020-05-29 15:39 ` [PATCH 24/30] KVM: nSVM: split nested_vmcb_check_controls Paolo Bonzini
2020-05-29 15:39 ` [PATCH 25/30] KVM: nSVM: leave guest mode when clearing EFER.SVME Paolo Bonzini
2020-06-01 2:26 ` Krish Sadhukhan
2020-06-01 7:28 ` Paolo Bonzini
2020-05-29 15:39 ` [PATCH 26/30] KVM: MMU: pass arbitrary CR0/CR4/EFER to kvm_init_shadow_mmu Paolo Bonzini
2020-05-29 15:39 ` [PATCH 27/30] selftests: kvm: introduce cpu_has_svm() check Paolo Bonzini
2020-05-29 15:39 ` [PATCH 28/30] selftests: kvm: add a SVM version of state-test Paolo Bonzini
2020-05-29 15:39 ` [PATCH 29/30] selftests: kvm: fix smm test on SVM Paolo Bonzini
2020-05-29 15:39 ` [PATCH 30/30] KVM: nSVM: implement KVM_GET_NESTED_STATE and KVM_SET_NESTED_STATE Paolo Bonzini
2020-06-02 0:11 ` Krish Sadhukhan
2020-06-04 14:47 ` Paolo Bonzini
2020-05-29 17:59 ` [PATCH v3 00/28] KVM: nSVM: event fixes and migration support Sean Christopherson
2020-05-29 19:07 ` Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=07139fc2-39bd-5bc5-ef23-a98681013665@oracle.com \
--to=krish.sadhukhan@oracle.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pbonzini@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome