mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Paolo Bonzini <pbonzini@redhat.com>
To: linux-kernel@vger.kernel.org, kvm@vger.kernel.org
Subject: [PATCH 26/30] KVM: MMU: pass arbitrary CR0/CR4/EFER to kvm_init_shadow_mmu
Date: Fri, 29 May 2020 11:39:30 -0400	[thread overview]
Message-ID: <20200529153934.11694-27-pbonzini@redhat.com> (raw)
In-Reply-To: <20200529153934.11694-1-pbonzini@redhat.com>

This allows fetching the registers from the hsave area when setting
up the NPT shadow MMU, and is needed for KVM_SET_NESTED_STATE (which
runs long after the CR0, CR4 and EFER values in vcpu have been switched
to hold L2 guest state).

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 arch/x86/kvm/mmu.h        |  2 +-
 arch/x86/kvm/mmu/mmu.c    | 14 +++++++++-----
 arch/x86/kvm/svm/nested.c |  5 ++++-
 3 files changed, 14 insertions(+), 7 deletions(-)

diff --git a/arch/x86/kvm/mmu.h b/arch/x86/kvm/mmu.h
index 048e865ad485..0ad06bfe2c2c 100644
--- a/arch/x86/kvm/mmu.h
+++ b/arch/x86/kvm/mmu.h
@@ -57,7 +57,7 @@ void
 reset_shadow_zero_bits_mask(struct kvm_vcpu *vcpu, struct kvm_mmu *context);
 
 void kvm_init_mmu(struct kvm_vcpu *vcpu, bool reset_roots);
-void kvm_init_shadow_mmu(struct kvm_vcpu *vcpu);
+void kvm_init_shadow_mmu(struct kvm_vcpu *vcpu, u32 cr0, u32 cr4, u32 efer);
 void kvm_init_shadow_ept_mmu(struct kvm_vcpu *vcpu, bool execonly,
 			     bool accessed_dirty, gpa_t new_eptp);
 bool kvm_can_do_async_pf(struct kvm_vcpu *vcpu);
diff --git a/arch/x86/kvm/mmu/mmu.c b/arch/x86/kvm/mmu/mmu.c
index fd1c9145505c..2e62a03410c7 100644
--- a/arch/x86/kvm/mmu/mmu.c
+++ b/arch/x86/kvm/mmu/mmu.c
@@ -4952,7 +4952,7 @@ kvm_calc_shadow_mmu_root_page_role(struct kvm_vcpu *vcpu, bool base_only)
 	return role;
 }
 
-void kvm_init_shadow_mmu(struct kvm_vcpu *vcpu)
+void kvm_init_shadow_mmu(struct kvm_vcpu *vcpu, u32 cr0, u32 cr4, u32 efer)
 {
 	struct kvm_mmu *context = vcpu->arch.mmu;
 	union kvm_mmu_role new_role =
@@ -4961,11 +4961,11 @@ void kvm_init_shadow_mmu(struct kvm_vcpu *vcpu)
 	if (new_role.as_u64 == context->mmu_role.as_u64)
 		return;
 
-	if (!is_paging(vcpu))
+	if (!(cr0 & X86_CR0_PG))
 		nonpaging_init_context(vcpu, context);
-	else if (is_long_mode(vcpu))
+	else if (efer & EFER_LMA)
 		paging64_init_context(vcpu, context);
-	else if (is_pae(vcpu))
+	else if (cr4 & X86_CR4_PAE)
 		paging32E_init_context(vcpu, context);
 	else
 		paging32_init_context(vcpu, context);
@@ -5043,7 +5043,11 @@ static void init_kvm_softmmu(struct kvm_vcpu *vcpu)
 {
 	struct kvm_mmu *context = vcpu->arch.mmu;
 
-	kvm_init_shadow_mmu(vcpu);
+	kvm_init_shadow_mmu(vcpu,
+			    kvm_read_cr0_bits(vcpu, X86_CR0_PG),
+			    kvm_read_cr4_bits(vcpu, X86_CR4_PAE),
+			    vcpu->arch.efer);
+
 	context->get_guest_pgd     = get_cr3;
 	context->get_pdptr         = kvm_pdptr_read;
 	context->inject_page_fault = kvm_inject_page_fault;
diff --git a/arch/x86/kvm/svm/nested.c b/arch/x86/kvm/svm/nested.c
index 369eca73fe3e..c712fe577029 100644
--- a/arch/x86/kvm/svm/nested.c
+++ b/arch/x86/kvm/svm/nested.c
@@ -80,10 +80,13 @@ static unsigned long nested_svm_get_tdp_cr3(struct kvm_vcpu *vcpu)
 
 static void nested_svm_init_mmu_context(struct kvm_vcpu *vcpu)
 {
+	struct vcpu_svm *svm = to_svm(vcpu);
+	struct vmcb *hsave = svm->nested.hsave;
+
 	WARN_ON(mmu_is_nested(vcpu));
 
 	vcpu->arch.mmu = &vcpu->arch.guest_mmu;
-	kvm_init_shadow_mmu(vcpu);
+	kvm_init_shadow_mmu(vcpu, X86_CR0_PG, hsave->save.cr4, hsave->save.efer);
 	vcpu->arch.mmu->get_guest_pgd     = nested_svm_get_tdp_cr3;
 	vcpu->arch.mmu->get_pdptr         = nested_svm_get_tdp_pdptr;
 	vcpu->arch.mmu->inject_page_fault = nested_svm_inject_npf_exit;
-- 
2.26.2



  parent reply	other threads:[~2020-05-29 15:40 UTC|newest]

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-29 15:39 [PATCH v3 00/28] KVM: nSVM: event fixes and migration support Paolo Bonzini
2020-05-29 15:39 ` [PATCH 01/30] KVM: x86: track manually whether an event has been injected Paolo Bonzini
2020-05-29 15:39 ` [PATCH 02/30] KVM: x86: enable event window in inject_pending_event Paolo Bonzini
2020-05-29 15:39 ` [PATCH 03/30] KVM: nSVM: inject exceptions via svm_check_nested_events Paolo Bonzini
2020-05-29 15:39 ` [PATCH 04/30] KVM: nSVM: remove exit_required Paolo Bonzini
2020-05-29 15:39 ` [PATCH 05/30] KVM: nSVM: correctly inject INIT vmexits Paolo Bonzini
2020-05-29 15:39 ` [PATCH 06/30] KVM: SVM: always update CR3 in VMCB Paolo Bonzini
2020-05-29 17:41   ` Krish Sadhukhan
2020-05-29 17:56     ` Sean Christopherson
2020-05-29 15:39 ` [PATCH 07/30] KVM: nVMX: always update CR3 in VMCS Paolo Bonzini
2020-05-29 15:39 ` [PATCH 08/30] KVM: nSVM: move map argument out of enter_svm_guest_mode Paolo Bonzini
2020-05-29 18:10   ` Krish Sadhukhan
2020-05-29 19:04     ` Paolo Bonzini
2020-05-29 20:02       ` Krish Sadhukhan
2020-05-29 15:39 ` [PATCH 09/30] KVM: nSVM: extract load_nested_vmcb_control Paolo Bonzini
2020-05-29 15:39 ` [PATCH 10/30] KVM: nSVM: extract preparation of VMCB for nested run Paolo Bonzini
2020-05-29 18:27   ` Krish Sadhukhan
2020-05-29 19:02     ` Paolo Bonzini
2020-05-29 15:39 ` [PATCH 11/30] KVM: nSVM: move MMU setup to nested_prepare_vmcb_control Paolo Bonzini
2020-05-29 15:39 ` [PATCH 12/30] KVM: nSVM: clean up tsc_offset update Paolo Bonzini
2020-05-29 15:39 ` [PATCH 13/30] KVM: nSVM: pass vmcb_control_area to copy_vmcb_control_area Paolo Bonzini
2020-05-29 15:39 ` [PATCH 14/30] KVM: nSVM: remove trailing padding for struct vmcb_control_area Paolo Bonzini
2020-05-29 15:39 ` [PATCH 15/30] KVM: nSVM: save all control fields in svm->nested Paolo Bonzini
2020-05-29 15:39 ` [PATCH 16/30] KVM: nSVM: restore clobbered INT_CTL fields after clearing VINTR Paolo Bonzini
2020-05-29 15:39 ` [PATCH 17/30] KVM: nSVM: synchronize VMCB controls updated by the processor on every vmexit Paolo Bonzini
2020-05-30  2:06   ` Krish Sadhukhan
2020-05-30  5:10     ` Paolo Bonzini
2020-05-29 15:39 ` [PATCH 18/30] KVM: nSVM: remove unnecessary if Paolo Bonzini
2020-05-29 15:39 ` [PATCH 19/30] KVM: nSVM: extract svm_set_gif Paolo Bonzini
2020-06-05 20:33   ` Qian Cai
2020-06-08 11:11     ` Paolo Bonzini
2020-05-29 15:39 ` [PATCH 20/30] KVM: SVM: preserve VGIF across VMCB switch Paolo Bonzini
2020-05-31 23:11   ` Krish Sadhukhan
2020-06-01  7:30     ` Paolo Bonzini
2020-05-29 15:39 ` [PATCH 21/30] KVM: nSVM: synthesize correct EXITINTINFO on vmexit Paolo Bonzini
2020-05-29 15:39 ` [PATCH 22/30] KVM: nSVM: remove HF_VINTR_MASK Paolo Bonzini
2020-05-29 15:39 ` [PATCH 23/30] KVM: nSVM: remove HF_HIF_MASK Paolo Bonzini
2020-05-29 15:39 ` [PATCH 24/30] KVM: nSVM: split nested_vmcb_check_controls Paolo Bonzini
2020-05-29 15:39 ` [PATCH 25/30] KVM: nSVM: leave guest mode when clearing EFER.SVME Paolo Bonzini
2020-06-01  2:26   ` Krish Sadhukhan
2020-06-01  7:28     ` Paolo Bonzini
2020-05-29 15:39 ` Paolo Bonzini [this message]
2020-05-29 15:39 ` [PATCH 27/30] selftests: kvm: introduce cpu_has_svm() check Paolo Bonzini
2020-05-29 15:39 ` [PATCH 28/30] selftests: kvm: add a SVM version of state-test Paolo Bonzini
2020-05-29 15:39 ` [PATCH 29/30] selftests: kvm: fix smm test on SVM Paolo Bonzini
2020-05-29 15:39 ` [PATCH 30/30] KVM: nSVM: implement KVM_GET_NESTED_STATE and KVM_SET_NESTED_STATE Paolo Bonzini
2020-06-02  0:11   ` Krish Sadhukhan
2020-06-04 14:47     ` Paolo Bonzini
2020-05-29 17:59 ` [PATCH v3 00/28] KVM: nSVM: event fixes and migration support Sean Christopherson
2020-05-29 19:07   ` Paolo Bonzini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200529153934.11694-27-pbonzini@redhat.com \
    --to=pbonzini@redhat.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome