From: Zdenek Kabelac <zkabelac@redhat.com>
To: LKML <linux-kernel@vger.kernel.org>,
dianders@chromium.org, linux@roeck-us.net,
stern@rowland.harvard.edu, gregkh@linuxfoundation.org
Subject: USB disk speed regression WD Elements - with bisect result 22547c4cc4fe20698a6a85a55b8788859134b8e4
Date: Mon, 24 Jul 2017 14:03:35 +0200 [thread overview]
Message-ID: <0759ca4b-8f0b-1b3e-5073-19433795f325@redhat.com> (raw)
Hi
I've problem with my USB storage devices: WD Elements 1TB.
(Bus 004 Device 002: ID 1058:10a8 Western Digital Technologies, Inc. Elements
Portable (WDBUZG))
After kernel >4.9 when disk is attached via cable it has very low speed
(less then 1MB/s).
It can run at full speed (>22MB/s) when the Linux kernel is fully rebooted (so
disk is attached during the reboot of Lenovo T61, C2D, Fedora Rawhide).
However when >4.9 kernel is running and disk is just attached it's very slow.
I've played a bisect game - and the clean result has been:
22547c4cc4fe20698a6a85a55b8788859134b8e4
When I just revert this patch with 4.13-rc1 - it's again running with full
speed even when disk is attached (thus no reboot is needed for full speed).
So while I've no idea what 22547c4cc4fe20698... is doing, it seems to have
some unpleasant side-effect on regular USB devices.
So what else is needed to get this properly working ?
(assuming plain revert of 22547c4cc4fe20698 is unwanted).
What more info can I provide to get this storage 'normally' usable without
rebooting the machine.
Regards
Zdenek
next reply other threads:[~2017-07-24 12:03 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-24 12:03 Zdenek Kabelac [this message]
2017-07-24 14:41 ` Alan Stern
2017-07-24 21:03 ` Guenter Roeck
2017-07-25 10:06 ` Zdenek Kabelac
2017-07-25 14:25 ` Alan Stern
2017-07-25 14:34 ` Zdenek Kabelac
2017-07-25 15:03 ` Zdenek Kabelac
2017-07-25 17:02 ` Alan Stern
2017-07-25 17:46 ` Zdenek Kabelac
2017-07-25 19:50 ` Alan Stern
2017-07-26 2:33 ` Guenter Roeck
2017-07-26 14:28 ` Alan Stern
2017-07-26 14:36 ` Zdenek Kabelac
2017-07-26 15:04 ` Alan Stern
2017-07-26 17:49 ` Zdenek Kabelac
2017-07-27 1:03 ` Alan Stern
2017-07-27 9:11 ` Zdenek Kabelac
2017-07-28 18:33 ` Alan Stern
[not found] <49a43034-9330-e48d-f0d5-896b23ecb552@redhat.com>
2017-07-29 2:09 ` Alan Stern
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0759ca4b-8f0b-1b3e-5073-19433795f325@redhat.com \
--to=zkabelac@redhat.com \
--cc=dianders@chromium.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®