Re: [PATCH] drm/msm/dpu: increase memtype count to 16 for sm8550

[Neil Armstrong <neil.armstrong@linaro.org>]

On 02/08/2023 15:48, Jonathan Marek wrote:
> sm8550 has 16 vbif clients.
> 
> This fixes the extra 2 clients (DMA4/DMA5) not having their memtype
> initialized. This fixes DMA4/DMA5 planes not displaying correctly.
> 
> Fixes: efcd0107 ("drm/msm/dpu: add support for SM8550")
> Signed-off-by: Jonathan Marek <jonathan@marek.ca>
> ---
>   .../msm/disp/dpu1/catalog/dpu_9_0_sm8550.h    |  4 ++--
>   .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c    | 20 +++++++++++++++++++
>   2 files changed, 22 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_9_0_sm8550.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_9_0_sm8550.h
> index f17b9a7fee85..89a2ac1e840d 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_9_0_sm8550.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_9_0_sm8550.h
> @@ -245,8 +245,8 @@ const struct dpu_mdss_cfg dpu_sm8550_cfg = {
>   	.merge_3d = sm8550_merge_3d,
>   	.intf_count = ARRAY_SIZE(sm8550_intf),
>   	.intf = sm8550_intf,
> -	.vbif_count = ARRAY_SIZE(sdm845_vbif),
> -	.vbif = sdm845_vbif,
> +	.vbif_count = ARRAY_SIZE(sm8550_vbif),
> +	.vbif = sm8550_vbif,
>   	.perf = &sm8550_perf_data,
>   	.mdss_irqs = BIT(MDP_SSPP_TOP0_INTR) | \
>   		     BIT(MDP_SSPP_TOP0_INTR2) | \
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> index 0de507d4d7b7..8b17a4a9b438 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> @@ -663,6 +663,26 @@ static const struct dpu_vbif_cfg sdm845_vbif[] = {
>   	},
>   };
>   
> +static const struct dpu_vbif_cfg sm8550_vbif[] = {
> +	{
> +	.name = "vbif_rt", .id = VBIF_RT,
> +	.base = 0, .len = 0x1040,
> +	.features = BIT(DPU_VBIF_QOS_REMAP),
> +	.xin_halt_timeout = 0x4000,
> +	.qos_rp_remap_size = 0x40,
> +	.qos_rt_tbl = {
> +		.npriority_lvl = ARRAY_SIZE(sdm845_rt_pri_lvl),
> +		.priority_lvl = sdm845_rt_pri_lvl,
> +		},
> +	.qos_nrt_tbl = {
> +		.npriority_lvl = ARRAY_SIZE(sdm845_nrt_pri_lvl),
> +		.priority_lvl = sdm845_nrt_pri_lvl,
> +		},
> +	.memtype_count = 16,
> +	.memtype = {3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3},
> +	},
> +};
> +
>   /*************************************************************
>    * PERF data config
>    *************************************************************/

Thanks !

Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD