Re: [PATCH v2 1/1] ARM: dts: mmp2-olpc-xo-1-75: clear the warnings when make dtbs

["Leizhen (ThunderTown)" <thunder.leizhen@huawei.com>]

On 2020/12/8 21:58, Arnd Bergmann wrote:
> On Mon, Dec 7, 2020 at 9:47 AM Zhen Lei <thunder.leizhen@huawei.com> wrote:
>>
>> The check_spi_bus_bridge() in scripts/dtc/checks.c requires that the node
>> have "spi-slave" property must with "#address-cells = <0>" and
>> "#size-cells = <0>". But currently both "#address-cells" and "#size-cells"
>> properties are deleted, the corresponding default values are 2 and 1. As a
>> result, the check fails and below warnings is displayed.
>>
>> arch/arm/boot/dts/mmp2.dtsi:472.23-480.6: Warning (spi_bus_bridge): \
>> /soc/apb@d4000000/spi@d4037000: incorrect #address-cells for SPI bus
>>   also defined at arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts:225.7-237.3
>> arch/arm/boot/dts/mmp2.dtsi:472.23-480.6: Warning (spi_bus_bridge): \
>> /soc/apb@d4000000/spi@d4037000: incorrect #size-cells for SPI bus
>>   also defined at arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts:225.7-237.3
>> arch/arm/boot/dts/mmp2-olpc-xo-1-75.dtb: Warning (spi_bus_reg): \
>> Failed prerequisite 'spi_bus_bridge'
>>
>> Because the value of "#size-cells" is already defined as zero in the node
>> "ssp3: spi@d4037000" in arch/arm/boot/dts/mmp2.dtsi. So we only need to
>> explicitly add "#address-cells = <0>" and keep "#size-cells" no change.
>>
>> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
> 
> Right, I already sent the same patch earlier.

Oh, sorry, I don't known it. If you send it earlier, please apply your patch!

> 
> Lubomir, can I apply this to the fixes branch?

This fix is really should be considered to merge into v5.10.

> 
>>  arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts | 2 +-
>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts b/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts
>> index adde62d6fce73b9..82da44dacba7172 100644
>> --- a/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts
>> +++ b/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts
>> @@ -224,7 +224,7 @@
>>
>>  &ssp3 {
>>         /delete-property/ #address-cells;
>> -       /delete-property/ #size-cells;
>> +       #address-cells = <0>;
>>         spi-slave;
>>         status = "okay";
>>         ready-gpios = <&gpio 125 GPIO_ACTIVE_HIGH>;
>> --
>> 1.8.3
>>
>>
> 
> .
>